Both feltine and fibrette are made of paper--tear quickly, and are unfit for use on any book that is ever likely to be read. All these imitations of leather are made of paper as their basis, and hence can never be proper subst.i.tutes for leather.
All torn leaves or plates in books should be at once mended by pasting a very thin onion-skin paper on both sides of the torn leaf, and pressing gently between leaves of sized paper until dry.
Corners made of vellum or parchment are more durable than any leather.
When dry, the parchment becomes as hard almost as iron and resists falls or abrasion. To use it on books where the backs are of leather is a departure from the uniformity or harmony of style insisted upon by many, but in binding books that are to be greatly worn, use should come before beauty.
In rebinding, all maps or folded plates should be mounted on thin canvas, linen, or muslin, strong and fine, to protect them from inevitable tearing by long use. If a coa.r.s.e or thick cloth is used, the maps will not fold or open easily and smoothly.
The cutting or tr.i.m.m.i.n.g of the edges of books needs to be watched with jealous care. Few have reflected that the more margin a binder cuts off, the greater his profit on any job, white paper shavings having a very appreciable price by the pound. A strictly uncut book is in many American libraries a rarity. And of the books which go a second time to the binder, although at first uncut, how many retain their fair proportions of margin when they come back? You have all seen books in which the text has been cut into by the ruthless knife-machine of the binder. This is called "bleeding" a book, and there are no words strong enough to denounce this murderous and cold-blooded atrocity. The tr.i.m.m.i.n.g of all books should be held within the narrowest limits--for the life of a book depends largely upon its preserving a good margin. Its only chance of being able to stand a second rebinding may depend upon its being very little trimmed at its first. If it must be cut at all, charge your binder to take off the merest shaving from either edge.
Every new book or magazine added to the library, if uncut, should be carefully cut with a paper-knife before it goes into the hands of any reader. Spoiled or torn or ragged edges will be the penalty of neglecting this. You have seen people tear open the leaves of books and magazines with their fingers--a barbarism which renders him who would be guilty of it worthy of banishment from the resorts of civilization. In cutting books, the leaves should always be held firmly down--and the knife pressed evenly through the uncut leaves to the farthest verge of the back. Books which are cut in the loose fashion which many use are left with rough or ragged edges always, and often a slice is gouged out of the margin by the mis-directed knife. Never trust a book to a novice to be cut, without showing him how to do it, and how not to do it.
The collation of new books in cloth or _broche_ should be done before cutting, provided they are issued to readers untrimmed. In collating books in two or more volumes double watchfulness is needed to guard against a missing signature, which may have its place filled by the same pages belonging to another volume--a mixture sometimes made in binderies, in "gathering" the sheets, and which makes it necessary to see that the signatures are right as well as the pages. The collator should check off all plates and maps called for by the table of contents to make sure that the copy is perfect. Books without pagination are of course to have their leaves counted, which is done first in detail, one by one, and then verified by a rapid counting in sections, in the manner used by printers and binders in counting paper by the quire.
The binding of books may be divided into two styles or methods, namely, machine-made book-bindings, and hand-made bindings. Binding by machinery is wholly a modern art, and is applied to all or nearly all new books coming from the press. As these are, in more than nine cases out of ten, bound in cloth covers, and these covers, or cases, are cut out and stamped by machinery, such books are called "case-made." The distinction between this method of binding and the hand method is that in the former the case is made separately from the book, which is then put into it.
After the sheets of any book come pressed and dried from the printing office, the first step is to fold them from the large flat sheets into book form. This is sometimes done by hand-folders of bone or some other hard material, but in large establishments for making books, it is done by a folding machine. This will fold ten thousand or more sheets in a day. The folded sheets are next placed in piles or rows, in their numerical sequence, and "gathered" by hand, _i. e._: a bindery hand picks up the sheets one by one, with great rapidity, until one whole book is gathered and collated, and the process is repeated so long as any sheets remain. Next, the books are thoroughly pressed or "smashed" as it is called, in a powerful smashing-machine, giving solidity to the book, which before pressing was loose and spongy. Then the books are sawed or grooved in the back by another machine, operating a swiftly moving saw, and sewed on cords by still another machine, at about half the cost of hand-sewing. Next, they are cut or trimmed on the three edges in a cutting-machine. The backs of the books are made round by a rounding-machine, leaving the back convex and the front concave in form, as seen in all finished books. The books are now ready for the covers.
These consist of binders" board or mill-board, cut out of large sheets into proper size, with lightning-like rapidity, by another machine called a rotary board-cutter. The cloth which is to form the back and sides of the book is cut out, of proper size for the boards, from great rolls of stamped or ribbed or embossed muslin, by another machine. The use of cloth, now so universal for book-binding, dates back little more than half a century. About 1825, Mr. Leighton, of London, introduced it as a subst.i.tute for the drab-colored paper then used on the sides, and for the printed t.i.tles on the backs. The boards are firmly glued to the cloth, the edges of which are turned over the boards, and fastened on the inside of the covers. The ornamental stamps or figures seen on the covers, both at the back and sides are stamped in with a heated die of bra.s.s, or other metal, worked by machinery. The lettering of the t.i.tle is done in the same way, only that gold-leaf is applied before the die falls. Lastly, the book is pasted by its fly leaves or end-leaves, (sometimes with the addition of a cloth guard) to the inside of the cloth case or cover, and the book is done, after a final pressing. By these rapid machine methods a single book-manufacturing house can turn out ten thousand volumes in a day, with a rapidity which almost takes the breath away from the beholder.
There is a kind of binding which dispenses entirely with sewing the sheets of a book. The backs are soaked with a solution of india-rubber, and each sheet must be thoroughly agglutinated to the backs, so as to adhere firmly to its fellows. This requires that all the sheets shall be folded as single leaves or folios, otherwise the inner leaves of the sheets, having no sewing, would drop out. This method is employed on volumes of plates, music, or any books made up of large separate sheets.
In notable contrast to these rapid methods of binding what are termed case-made books, comes the hand-made process, where only partial use of machinery is possible.
The rebinding process is divided into three branches: preparing, forwarding, and finishing. The most vital distinction between a machine-made and a hand-made binding, is that the cloth or case-made book is not fastened into its cover in a firm and permanent way, as in leather-backed books. It is simply pasted or glued to its boards--not interlaced by the cords or bands on which it is sewed. Hence one can easily tear off the whole cover of a cloth-bound book, by a slight effort, and such volumes tend to come to pieces early, under constant wear and tear of library service.
Let us now turn to the practical steps pursued in the treatment of books for library use. In re-binding a book, the first step is to take the book apart, or, as it is sometimes called, to take it to pieces. This is done by first stripping off its cover, if it has one. Cloth covers easily come off, as their boards are not tied to the cords on which the book is sewed, but are simply fastened by paste or glue to the boards by a muslin guard, or else the cloth is glued to the back of the book. If the book is leather-covered, or half-bound, _i. e._: with a leather back and (usually) leather on its four corners, taking it to pieces is a somewhat slower process. The binder"s knife is used to cut the leather at the joints or hinges of the volume, so that the boards may be removed. The cords that tie the boards to the volume are cut at the same time. If the book has a loose or flexible back, the whole cover comes easily off: if bound with a tight back, the glued leather back must be soaked with a sponge full of water, till it is soft enough to peel off, and let the sheets be easily separated.
The book is now stripped of its former binding, and the next step is to take it apart, signature by signature. A signature is that number of leaves which make up one sheet of the book in hand. Thus, an octavo volume, or a volume printed in eights, as it is called, has eight leaves, or sixteen pages to a signature; a quarto four leaves; a duodecimo, or 12 mo. twelve leaves. The term signature (from Lat. _signare_, a sign) is also applied to a letter or figure printed at the foot of the first page of each sheet or section of the book. If the letters are used, the signatures begin with A. and follow in regular sequence of the alphabet.
If the book is a very thick one, (or more than twenty-six signatures) then after signature Z, it is customary to duplicate the letters--A.
A.--etc., for the remaining signatures. If figures are used instead of letters, the signatures run on to the last, in order of numbers. These letters, indicating signatures are an aid to the binder, in folding, "gathering," and collating the consecutive sheets of any book, saving constant reference to the "pagination," as it is termed, or the paging of the volume, which would take much more time. In many books, you find the signature repeated in the "inset," or the inner leaves of the sheet, with a star or a figure to mark the sequence. Many books, however, are now printed without any signature marks whatever.
To return: in taking apart the sheets or signatures, where they are stuck together at the back by adhesive glue or paste, the knife is first used to cut the thread in the grooves, where the book is sewed on cords or tape. Then the back is again soaked, the sheets are carefully separated, and the adhering substance removed by the knife or fingers. Care has to be taken to lay the signatures in strict order or sequence of pages, or the book may be bound up wrongly. The threads are next to be removed from the inside of every sheet. The sheets being all separated, the book is next pressed, to render all the leaves smooth, and the book solid for binding. Formerly, books were beaten by a powerful hammer, to accomplish this, but it is much more quickly and effectively done in most binderies by the ordinary screw press. Every pressing of books should leave them under pressure at least eight hours.
After pressing, the next step is to sew the sheets on to cords or twine, set vertically at proper distances in a frame, called a "sewing bench,"
for this purpose. No book can be thoroughly well bound if the sewing is slighted in any degree. Insist upon strong, honest linen thread--if it breaks with a slight pull it is not fit to be used in a book. The book is prepared for the sewer by sawing several grooves across the back with a common saw. The two end grooves are light and narrow, the central ones wider and deeper. Into these inner grooves, the cords fit easily, and the book being taken, sheet by sheet, is firmly sewed around the cords, by alternate movements of the needle and thread, always along the middle of the sheet, the thread making a firm knot at each end (called the "kettle-st.i.tch") as it is returned for sewing on the next sheet.
Sometimes the backs are not sawed at all, but the sheets of the book are sewed around the cords, which thus project a little from the back, and form the "bands," seen in raised form on the backs of some books. Books should be sewed on three to six cords, according to their size. This raised-band sewing is reckoned by some a feature of excellent binding.
The sunken-band style is apt to give a stiff back, while the raised bands are usually treated with a flexible back. When sewed, the book is detached from its fellows, which may have been sewed on the same bench, by slipping it along the cords, then cutting them apart, so as to leave some two inches of each cord projecting, as ends to be fastened later to the board. In careful binding, the thread is sewed "all along," _i. e._: each sheet by itself, instead of "two on," as it is called.
The next process is termed "lining up," and consists of putting on the proper fly-leaves or end-leaves, at the beginning and end of the volume.
These usually consist of four leaves of ordinary white printing paper at each end, sometimes finished out with two leaves of colored or marbled paper, to add a touch of beauty to the book when opened. Marbled paper is more durable in color than the tinted, and does not stain so easily. One of these end-leaves is pasted down to the inside cover, while the other is left flying--whence "fly-leaf."
After this comes the cutting of the book at the edges. This is done by s.c.r.e.w.i.n.g it firmly in a cutting-machine, which works a sharp knife rapidly, shaving off the edges successively of the head, front and end, or "tail" as it is called in book-binding parlance. This tr.i.m.m.i.n.g used to be done by hand, with a sharp cutting knife called by binders a "plough."
Now, there are many forms of cutting machines, some of which are called "guillotines" for an obvious reason. In binding some books, which it is desired to preserve with wide margins, only a mere shaving is taken off the head, so as to leave it smooth at the top, letting the front and tail leaves remain uncut. But in case of re-binding much-used books, the edges are commonly so much soiled that tr.i.m.m.i.n.g all around may be required, in order that they may present a decent appearance. Yet in no case should the binder be allowed to cut any book deeply, so as to destroy a good, fair margin. Care must also be taken to cut the margins evenly, at right angles, avoiding any crooked lines.
After cutting the book comes "rounding," or giving the back of the book a curved instead of its flat shape. This process is done with the hand, by a hammer, or in a rounding press, with a metallic roller. Before rounding, the back of the book is glued up, that is, receives a coating of melted glue with a glueing brush, to hold the sections together, and render the back firm, and a thorough rubbing of the back with hot glue between the sections gives strength to the volume.
Next comes the treatment of the edges of the book, hitherto all white, in order to protect them from showing soil in long use. Sometimes (and this is the cheaper process) the books are simply sprinkled at the edges with a brush dipped in a dark fluid made of burnt umber or red ochre, and shaken with a quick concussion near the edges until they receive a sprinkle of color from the brush. Other books receive what is called a solid color on the edges, the books being screwed into a press, and the color applied with a sponge or brush.
But a marbled edge presents a far more handsome appearance, and should harmonize in color and figure with the marbled paper of the end leaves.
Marbling, so called from its imitation of richly veined colored marble, is staining paper or book edges with variegated colors. The process of marbling is highly curious, both chemically and aesthetically, and may be briefly described. A large shallow trough or vat is filled with prepared gum water (gum-tragacanth being used); on the surface of this gum-water bright colors, mixed with a little ox-gall, to be used in producing the composite effect aimed at in the marbling are thrown or sprinkled in liquid form. Then they are deftly stirred or agitated on the surface of the water, with an implement shaped to produce a certain pattern. The most commonly used one is a long metallic comb, which is drawn across the surface of the combined liquids, leaving its pattern impressed upon the ductile fluid. The edges of the book to be marbled are then touched or dipped on the top of the water, on which the coloring matter floats, and at once withdrawn, exhibiting on the edge the precise pattern of "combed marble" desired, since the various colors--red, yellow, blue, white, etc., have adhered to the surface of the book-edges. The serrated and diversified effect of most comb-marbling is due to stroking the comb in waved lines over the surface. The spotted effect so much admired in other forms, is produced by throwing the colors on with a brush, at the fancy of the skilled workman, or artist, as you may call him. Marbled paper is made in the same way, by dipping one surface of the white sheet, held in a curved form, with great care on the surface of the coloring vat. This is termed sh.e.l.l and wave marbling, as distinguished from comb-marbling.
The paper or the book edges are next finished by sizing and burnishing, which gives them a bright glistening appearance.
A still more ornate effect in a book is attained by gilding the edges.
Frequently the head of a book is gilt, leaving the front and tail of an uncut book without ornament, and this is esteemed a very elegant style by book connoisseurs, who are, or should be solicitous of wide margins. The gilding of the top edge is a partial protection from dust falling inside, to which the other edges are not so liable. To gild a book edge, it is placed in a press, the edges sc.r.a.ped or smoothed, and coated with a red-colored fluid, which serves to heighten the effect of the gold. Then a sizing is applied by a camel"s-hair brush, being a sticky substance, usually the white of an egg, mixed with water (termed by binders "glaire") and the gold-leaf is laid smoothly over it. When the sizing is dry, the gold is burnished with a tool, tipped with an agate or blood-stone, drawn forcibly over the edge until it a.s.sumes a glistening appearance.
After the edges have been treated by whatever process, there follows what is termed the "backing" of the book. The volume is pressed between iron clamps, and the back is hammered or rolled where it joins the sides, so as to form a groove to hold the boards forming the solid portion of the cover of every book. A backing-machine is sometimes used for this process, making by pressure the joint or groove for the boards. Then the "head-band" is glued on, being a silk braid or colored muslin, fastened around a cord, which projects a little above the head and the tail, at the back of the book, giving it a more finished appearance. At the same time, a book-mark for keeping the place is sometimes inserted and fastened like the head-band. This is often a narrow ribbon of colored silk, or satin, and helps to give a finish to the book, as well as to furnish the reader a trustworthy guide to keep a place--as it will not fall out like bits of paper inserted for that purpose.
Next, the mill-boards are applied, cut so as to project about an eighth to a quarter of an inch from the edges of the book on three sides. The book is held to the boards by the ends of its cords being interlaced, _i.
e._: pa.s.sed twice through holes pierced in the boards, the loose ends of the cords being then wet with paste and hammered down flat to the surface of the boards. The best tar-boards should be used, which are made of old rope; no board made of straw is fit to be used on any book. Straw boards are an abomination--a cheap expedient which costs dearly in the end. The binder should use heavy boards on the larger and thicker volumes, but thin ones on all duodecimos and smaller sizes.
Next, the books are subjected to a second pressing, after which the lining of the back is in order. Good thick brown paper is generally used for this, cut to the length of the book, and is firmly glued to the back, and rubbed down closely with a bone folder. A cloth "joint," or piece of linen (termed "muslin super,") is often glued to the back, with two narrow flaps to be pasted to the boards, on each side, thus giving greater tenacity to the covering. If the book is to be backed so as to open freely, that is, to have a spring back or elastic back, two thicknesses of a firm, strong paper, or thin card-board are used, one thickness of the paper being glued to the back of the book, while the other--open in the middle, but fastened at the edges, is to be glued to the leather of which the back is to be made.
After this, comes putting the book in leather. If full bound a piece of leather cut full size of the volume, with about half an inch over, is firmly glued or pasted to the boards and the back, the leather being turned over the edges of the boards, and nicely glued on their inside margin. It is of great importance that the edges of the leather should be smoothly pared down with a sharp knife, so as to present an even edge where the leather joins the boards, not a protuberance--which makes an ugly and clumsy piece of work, instead of a neat one.
For half-binding, a piece of leather is taken large enough to cover the back lengthwise, and turn in at the head and tail, while the width should be such as to allow from one to one and a half inches of the leather to be firmly glued to the boards next the back. The four corners of the boards are next to be leathered, the edges of the leather being carefully pared down, to give a smooth surface, even with the boards, when turned in. The leather is usually wet, preparatory to being manipulated thus, which renders it more flexible and ductile than in its dry state. The cloth or marbled paper is afterwards pasted or glued to the sides of the book, and turned neatly over the edge of the boards.
It may be added, that the edges of the boards, in binding nice books, are sometimes ground off on a swiftly revolving emery-wheel, giving the book a beveled edge, which is regarded as handsomer and more finished than a straight rectangular edge.
All the processes. .h.i.therto described are called "forwarding" the book: we now come to what is denominated "finishing." This includes the lettering of the t.i.tle, and the embellishing of the back and sides, with or without gilding, as the case may be. Before this is taken in hand, the leather of the book must be perfectly dry. For the lettering, copper-faced types are used to set up the desired sequence of letters and words, and care and taste should be exercised to have (1) Types neither too large, which present a clumsy appearance, nor too small, which are difficult to read.
(2) Proper s.p.a.cing of the words and lines, and "balancing" the component parts of the lettering on the back, so as to present a neat and harmonious effect to the eye. A word should never be divided or hyphenated in lettering, when it can be avoided. In the case of quite thin volumes, the t.i.tle may be lettered lengthwise along the back, in plain, legible type, instead of in very small letters across the back, which are often illegible. The method of applying gold lettering is as follows: the back of the book where the t.i.tle is to go, is first moistened with a sticky substance, as alb.u.men or glaire, heretofore mentioned, laid on with a camel"s hair brush. The type (or the die as the case may be) is heated in a binder"s charcoal furnace, or gas stove, to insure the adhesion of the gold leaf. The thin gold leaf (which comes packed in little square "books," one sheet between every two leaves) is then cut the proper size by the broad thin knife of the "finisher," and carefully laid over the sized spot to receive the lettering. Usually, two thicknesses of gold leaf are laid one above another, which ensures a brighter and more decided effect in the lettering. The type metal or die is then pressed firmly and evenly down upon the gold-leaf, and the surplus shavings of the gold carefully brushed off and husbanded, for this leaf is worth money. The gold leaf generally in use costs about $6.50 for 500 little squares or sheets. It is almost inconceivably thin, the thickness of one gold leaf being estimated at about 1/280000 of an inch.
Besides the lettering, many books receive gold ornamentation on the back or side of a more or less elaborate character. Designs of great artistic beauty, and in countless variety, have been devised for book ornaments, and French and English book-binders have vied with each other for generations in the production of decorative borders, fillets, centre-pieces, rolls, and the most exquisite gold-tooling, of which the art is capable.
These varied patterns of book ornamentation are cut in bra.s.s or steel, and applied by the embossing press with a rapidity far exceeding that of the hand-work formerly executed by the gilders of books. But for choice books and select jobs, only the hands are employed, with such fillets, stamps, pallets, rolls, and polishing irons as may aid in the nice execution of the work. If a book is to be bound in what is called "morocco antique," it is to be "blind-tooled," _i. e._: the hot iron wheels which impress the fillets or rolls, are to be worked in blank, or without gold-leaf ornamentation. This is a rich and tasteful binding, especially with carefully beveled boards, and gilded edges.
On some books, money has been lavished on the binding to an amount exceeding by many fold the cost of the book itself. Elegant book-binding has come to be reckoned as a fine art, and why should not "the art preservative of all other arts"--printing--be preserved in permanent and sumptuous, if not splendid style, in its environment? Specimens of French artistic binding from the library of Grolier, that celebrated and munificent patron of art, who died in 1565, have pa.s.sed through the hands of many eager connoisseurs, always at advancing prices. The Grolier binding was notable for the elegant finish of its interlaced ornaments in gold-leaf, a delicacy of touch, and an inimitable flowing grace, which modern binders have struggled after in vain. At the Beckford Library sale in London, in 1884, there was a great array of fine French bindings of early date. A book from Grolier"s library, the "Toison d"Or," 1563, brought 405, or over $2,000, and a Heptameron, which had belonged to Louis XIV, in beautiful brown morocco, with crown, fleur-de-lys, a stag, a c.o.c.k, and stars, as ornaments, all exquisitely worked in gold, lined with vellum, was sold for 400. Following the Grolier patterns, came another highly decorative style, by the French binders, which was notable for the very delicate gold tooling, covering the whole sides of the book with exquisite scroll-work, and branches of laurel.
The most celebrated of English book-binders was Roger Payne, who was notable for the careful labor bestowed on the forwarding and finishing of his books, specimens of which are still reckoned among the _chefs-d"oeuvre_ of the art. His favorite style was a roughly-grained red morocco, always full-bound, and he kept in view what many binders forget, that the leather is the main thing in a finely executed binding, not to be overlaid by too much gilding and decoration. He charged twelve guineas each (over $60) for binding some small volumes in his best style. Payne"s most notable successors have been Lewis, Hayday, Bedford, and Zaehnsdorf, the latter of whom is the author of a treatise on book-binding. At the art exhibition of 1862, a book bound by Bedford was exhibited, which took two months merely to finish, and the binding cost forty guineas; and a Dore"s Dante, exquisitely bound by Zaehnsdorf, in Grolier style, cost one hundred guineas.
A decorative treatment not yet mentioned is applied to the covers of some books, which are bound in elegant full calf. To give to this leather the elegant finish known as "tree-calf binding", it is first washed with glaire or alb.u.men. The boards of the book are then bent to a convex shape, and water sprinkled over, until it runs down from the centre in many little branches or rivulets. While running, a solution of copperas is sprinkled on, and carried along the branches which radiate from the central trunk, producing the dark-mottled colored effect which resembles, more or less nearly, a tree with its spreading branches.
To make the book beautiful should be the united aim of all who are concerned in its manufacture--the paper-maker, the printer, and the book-binder. While utility comes first in the art of book-making for libraries, yet neatness and even elegance should always be united with it. An ill-forwarded book, or a badly finished one, presents a clumsy, unattractive look to the eye; while an evenly made piece of work, and a careful and tasteful ornamentation in the gilding, attract every discerning reader by their beauty. One writer upon book-binding terms the forwarder of the book an artizan, and the finisher an artist; but both should have the true artist"s taste, in order to produce the work that shall commend itself by intrinsic excellence. The form and shape of the book depend wholly, indeed, on the forwarder.
We are told that the great beauty of the Grolier bindings lay in the lavish and tasteful adornment of the sides. In fact, much depends upon the design, in every piece of decorative work. The pretty scroll patterns, the interlaced figures, the delicate tracery, the circles, rosettes, and stars, the lovely arabesques, the flowers and leaves borrowed from the floral kingdom, the geometric lines, the embroidered borders, like fine lace-work,--all these lend their separate individual charms to the finish of the varied specimens of the binder"s art. There are some books that look as brilliant as jewels in their rich, l.u.s.trous adornment, the design sometimes powdered with gold points and stars. Some gems of art are lined with rich colored leather in the inside covers, which are stamped and figured in gold. This is termed "_double_" by the French. Some have their edges gilded over marbling, a refinement of beauty which adds richness to the work, the marble design showing through the brilliant gold, when the edge is turned. Others have pictorial designs drawn on the edges, which are then gilded over the pictures. This complex style of gilding, the French term _gaufre_. It was formerly much in vogue, but is latterly out of fashion. Many gems of binding are adorned with fly-leaves of moire silk, or rich colored satin. Color, interspersed with gold in the finish of a book covering, heightens the effect. The morocco of the side-cover is sometimes cut, and inlaid with leather of a different color. Inlaying with morocco or kid is the richest style of decoration which the art has yet reached. Beautiful bindings have been in greater request during the past twenty years than ever before. There was a renaissance of the ancient styles of decoration in France, and the choice Grolier and Maioli patterns were revived with the general applause of the lovers of fine books.
In vivid contrast to these lovely specimens of the binder"s art, are found innumerable bibliopegic horrors, on the shelves of countless libraries, public and private. Among these are to be reckoned most law books, clad in that dead monotony of ugliness, which Charles d.i.c.kens has described as "that _under-done pie-crust_ cover, which is technically known as law calf." There are other uncouth and unwholesome specimens everywhere abroad, "whom Satan hath bound", to borrow Mr. Henry Stevens"s witty application of a well-known Scripture text. Such repellant bindings are only fit to serve as models to be avoided by the librarian.
The binding that is executed by machinery is sometimes called "commercial binding". It is also known as "edition binding", because the whole edition of a book is bound in uniform style of cover. While the modern figured cloth binding originated in England, it has had its fullest development in the United States. Here, those ingenious and powerful machines which execute every branch of the folding and forwarding of a book, and even the finishing of the covers, with almost lightning speed, were mostly invented and applied. Very vivid is the contrast between the quiet, humdrum air of the old-fashioned bindery hand-work, and the ceaseless clang and roar of the machinery which turns out thousands of volumes in a day.
"Not as ours the books of old, Things that steam can stamp and fold."
I believe that I failed to notice, among the varieties of material for book-bindings heretofore enumerated, some of the rarer and more singular styles. Thus, books have been bound in enamel, (richly variegated in color) in Persian silk, in seal-skin, in the skin of the rabbit, white-bear, crocodile, cat, dog, mole, tiger, otter, buffalo, wolf, and even rattle-snake. A favorite modern leather for purses and satchels, alligator-skin, has been also applied to the clothing of books. Many eccentric fancies have been exemplified in book-binding, but the acme of gruesome oddity has been reached by binding books in human skin, of which many examples are on record. It is perhaps three centuries old, but the first considerable instance of its use grew out of the horrors of the French Revolution. In England, the Bristol law library has several volumes bound in the skin of local criminals, flayed after execution, and specially tanned for the purpose. It is described as rather darker than vellum. A Russian poet is said to have bound his sonnets in human leather--his own skin--taken from a broken thigh--and the book he presented to the lady of his affections! Such ghoulish incidents as these afford curious though repulsive glimpses of the endless vagaries of human nature.
It is said that the invention of half-binding originated among the economists of Germany; and some wealthy bibliophiles have stigmatized this style of dressing books as "genteel poverty." But its utility and economy have been demonstrated too long to admit of any doubt that half-binding has come to stay; while, as we have seen, it is also capable of attractive aesthetic features. Mr. William Matthews, perhaps the foremost of American binders, said that "a book when neatly forwarded, and cleanly covered, is in a very satisfactory condition without any finishing or decorating." It was this same binder who exhibited at the New York World"s Fair Exhibition of 1853, a copy of Owen Jones"s Alhambra, bound by him in full Russia, inlaid with blue and red morocco, with gold tooling all executed by hand, taking six months to complete, and costing the binder no less than five hundred dollars.
Book lettering, or stamping the proper t.i.tle on the back of the book, is a matter of the first importance. As the t.i.tles of most books are much too long to go on the back, a careful selection of the most distinctive words becomes necessary. Here the taste and judgment of the librarian come indispensably into play. To select the lettering of a book should never be left to the binder, because it is not his business, and because, in most cases, he will make a mistake somewhere in the matter. From want of care on this point, many libraries are filled with wrongly lettered books, misleading t.i.tles, and blunders as ludicrous as they are distressing. I have had to have thousands of volumes in the Library of Congress re-lettered. A copy of Lord Bacon"s "Sylva Sylvarum", for example, was lettered "Verlum"s Sylva"--because the sapient binder read on the t.i.tle-page "By Baron Verulam", and it was not his business to find out that this was the t.i.tle of honor which Bacon bore; so, by a compound blunder, he converted Verulam into Verlum, and gave the book to an unknown writer. This is perhaps an extreme case, but you will find many to match it. Another folio, Rochefort"s History of the Caribby Islands, was lettered "Davies" Carriby Islands," because the t.i.tle bore the statement "Rendered into English by John Davies." In another library, the great work of the naturalist, Buffon, was actually lettered "Buffoon"s Natural History." Neither of these blunders was as bad as that of the owner of an elegant black-letter edition of a Latin cla.s.sic, which was printed without t.i.tle-page, like most fifteenth century books, and began at the top of the first leaf, in large letters--"HOC INCIPIT," signifying "This begins", followed by the t.i.tle or subject of the book. The wiseacre who owned it had the book richly bound, and directed it to be lettered on the back--"Works of Hoc Incipit, Rome, 1490." This is a true story, and the hero of it might perhaps, on the strength of owning so many learned works, have pa.s.sed for a philosopher, if he had not taken the pains to advertise himself as a blockhead.
Some of the commonest blunders are stamping on the back the translator"s or the editor"s name, instead of that of the author of the book; putting on adjectives instead of substantives for t.i.tles; modernizing ancient and characteristic spelling, found in the t.i.tle, (the exact orthography of which should always be followed); mixing up the number and the case of Latin t.i.tles, and those in other foreign languages; leaving off entirely the name of the writer; and lettering periodicals by putting on the volume without the year, or the year, without the number of the volume.
"No one but an idiot", said Mr. C. Walford to the London Librarians"