[Ill.u.s.tration: Fig. 12.]

A small _magnet_ should be kept on hand, for the purpose of testing reduced metals.

_Nippers_, for the purpose of breaking off pieces of minerals for a.n.a.lysis, without injuring the entire piece, are indispensable, Fig 13.

[Ill.u.s.tration: Fig. 13.]

A pair of _scissors_ is required to trim the wick of the and for the tr.i.m.m.i.n.g of the edge of platinum foil.

A small _spatula_ should be kept for the purpose of mixing substances with fluxes.

THE REAGENTS.

Those substances which possess the property of acting upon other substances, in such a characteristic manner that they can be recognized, either by their color, or by their effervescence, or by the peculiar precipitation produced, are termed _reagents_. The phenomena thus produced is termed _reaction_. We use those reagents, or _tests_, for the purpose of ascertaining the presence or the absence of certain substances, through the peculiar phenomena produced when brought in contact with them.

The number of reagents employed in blowpipe a.n.a.lysis is not great, and therefore we shall here give a brief description of their preparation and use. It is indispensably necessary that they should be chemically pure, as every admixture of a foreign substance would only produce a false result. Some of them have a strong affinity for water, or are deliquescent, and consequently absorb it greedily from the air. These must be kept in gla.s.s bottles, with gla.s.s stoppers, fitted air-tight by grinding.

A. REAGENTS OF GENERAL USE.

1. _Carbonate of Soda._--(NaO, CO^{2}) Wash the bicarbonate of soda (NaO, 2CO^{2}) upon a filter, with cold water, until the filtrate ceases to give, after neutralization with diluted nitric acid (NO^{5}), a precipitate with nitrate of baryta, (BaO, NO^{5}), or nitrate of silver, (AgO, NO^{5}). That left upon the filter we make red hot in a platinum, silver, or porcelain dish. One atom of carbonic acid is expelled, and the residue is carbonate of soda.

A solution of soda must not be changed by the addition of sulphide of ammonium. And when neutralized with hydrochloric acid, and evaporated to dryness, and again dissolved in water, there must be no residue left.

Carbonate of soda is an excellent agent in reduction, in consequence of its easy fusibility, whereby it causes the close contact of the oxides with the charcoal support, so that the blowpipe flame can reach every part of the substance under examination.

For the decomposition and determination of insoluble substances, particularly the silicates, carbonate of soda is indispensable. But for the latter purpose, we use with advantage a mixture of ten parts of soda and thirteen parts of dry carbonate of potash, which mixture fuses more easily than the carbonate of soda alone.

2. _Hydrate of Baryta_ (BaO, HO).--This salt is used sometimes for the detection of alkalies in silicates. Mix one part of the substance with about four parts of the hydrate of baryta, and expose it to the blowpipe flame. The hydrate of baryta combines with the silicic acid, and forms the super-basic silicate of baryta, while the oxides become free. The fused ma.s.s must be dissolved in hydrochloric acid, which converts the oxides into chlorides. Evaporate to dryness, and dissolve the residue in water. The silicic acid remains insoluble.

The hydrate of baryta is prepared by mixing six parts of finely powdered heavy-spar (BaO, SO_{3}) with one part of charcoal and one and a half parts of wheat flour, and exposing this mixture in a Hessian crucible with a cover to a strong and continuous red heat. The cooled chocolate-brown ma.s.s must be boiled with twenty parts of water, and, while boiling, there must be added the oxide of copper in sufficient quant.i.ty, or until the liquid will not impart a black color to a solution of acetate of lead (PbO, [=]A). The liquid must be filtered while hot, and as it cools the hydrate of baryta appears in crystals. These crystals must be washed with a little cold water, and then heated at a low temperature in a porcelain dish until the crystal water is expelled. The hydrate of baryta melts by a low red heat without losing its water of hydration.

3. _Bisulphate of Pota.s.sa_ (KO, 2SO^{3}).--At a red heat the half of the sulphuric acid of this salt becomes free, and thus separates and expels volatile substances, by which we can recognize lithium, boracic acid, nitric acid, fluoric acid, bromine, iodine, chlorine; or it decomposes and reveals some other compounds, as, for instance, the salts of the t.i.tanic, tantalic and tungstic acids. The bisulphate of potash is also used for the purpose of converting a substance into sulphate, or to free it at once from certain const.i.tuents. These sulphates are dissolved in water, by which we are enabled to effect the separation of its various const.i.tuents.

PREPARATION.--Two parts of coa.r.s.ely powdered sulphate of potash are placed in a porcelain crucible, and one part of pure sulphuric acid is poured over it. Expose this to heat over the spirit-lamp, until the whole becomes a clear liquid. The cooled ma.s.s must be of a pure white color, and may be got out of the crucible by inverting it. It must be kept in a fine powder.

4. _Oxalate of Pota.s.sa_ (KO, [=]O).--Dissolve bioxalate of potash in water, and neutralize with carbonate of potash. Evaporate the solution at a low heat to dryness, stirring constantly towards the close of the operation. The dry residue is to be kept in the form of a powder.

The oxalate of potash, at a low red heat, eliminates a considerable quant.i.ty of carbonic oxide, which, having a strong affinity for oxygen, with which it forms carbonic acid, it is therefore a powerful agent of reduction. It is in many cases preferable to carbonate of soda.

5. _Cyanide of Pota.s.sium_ (Cy, K).--In the dry method of a.n.a.lysis, this salt is one of the most efficient agents for the reduction of metallic oxides. It separates not only the metals from their oxygen compounds, but likewise from their sulphur compounds, while it is converted through the action of the oxygen into carbonate of potash, or, in the latter case, combines with the sulphur and forms the sulphureted cyanide of pota.s.sium. This separation is facilitated by its easy fusibility. But in many cases it melts too freely, and therefore it is better to mix it, for blowpipe a.n.a.lysis, with an equal quant.i.ty of soda. This mixture has great powers of reduction, and it is easily absorbed by the charcoal, while the globules of reduced metal are visible in the greatest purity.

PREPARATION.--Deprive the ferrocyanide of pota.s.sium (2KCy + FeCy) of its water by heating it over the spirit-lamp in a porcelain dish. Mix eight parts of this anhydrous salt with three parts of dry carbonate of potash, and fuse the mixture by a low red heat in a Hessian, or still better, in an iron crucible with a cover, until the ma.s.s flows quiet and clear, and a sample taken up with an iron spatula appears perfectly white. Pour the clear ma.s.s out into a china or porcelain dish or an iron plate, but with caution that the fine iron particles which have settled to the bottom, do not mix with it. The white fused ma.s.s must be powdered, and kept from the air. The cyanide of pota.s.sium thus prepared, contains some of the cyanate of pota.s.sa, but the admixture does not deteriorate it for blowpipe use. It must be perfectly white, free from iron, charcoal, and sulphide of pota.s.sium.

The solution of it in water must give a white precipitate with a solution of lead, and when neutralized with hydrochloric acid, and evaporated to dryness, it must not give an insoluble residue by dissolving it again in water.

6. _Nitrate of Pota.s.sa, Saltpetre_ (KO, NO^{5}).--Saturate boiling water with commercial saltpetre, filter while hot in a beaker gla.s.s, which is to be placed in cold water, and stir while the solution is cooling. The greater part of the saltpetre will crystallize in very fine crystals. Place these crystals upon a filter, and wash them with a little cold water, until a solution of nitrate of silver ceases to exhibit any reaction upon the filtrate. These crystals must be dried and powdered.

Saltpetre, when heated with substances easy of oxidation, yields its oxygen quite readily, and is, therefore, a powerful means of oxidation. In blowpipe a.n.a.lysis, we use it particularly to convert sulphides (as those of a.r.s.enic, antimony, &c.) into oxides and acids.

We furthermore use saltpetre for the purpose of producing a complete oxidation of small quant.i.ties of metallic oxides, which oxidize with difficulty in the oxidation flame, so that the color of the bead, in its highest state of oxidation, shall be visible, as for instance, manganese dissolved in the microcosmic salt.

7. _Biborate of soda, borax_--(NaO + 2BO^{3}).--Commercial borax is seldom pure enough for a reagent. A solution of borax must not give a precipitate with carbonate of pota.s.sa; or, after the addition of dilute nitric acid, it must remain clear upon the addition of nitrate of silver, or nitrate of baryta. Or a small piece of the dry salt, fused upon a platinum wire, must give a clear and uncolored gla.s.s, as well in the oxidation flame as in the reduction flame. If these tests indicate a foreign admixture, the borax must be purified by re-crystallization. These crystals are washed upon a filter, dried, and heated, to expel the crystal water, or until the ma.s.s ceases to swell up, and it is reduced to powder.

Boracic acid is incombustible, and has a strong affinity for oxides when fused with them; therefore, it not only directly combines with oxides, but it expels, by fusion, all other volatile acids from their salts. Furthermore, boracic acid promotes the oxidation of metals and sulphur, and induces haloid compounds, in the oxidation flame, to combine with the rising oxides. Borates thus made, melt generally by themselves; but admixed with borate of soda, they fuse much more readily, give a clear bead. Borax acts either as a flux, or through the formation of double salts.

In borax, we have the action of free boracic acid, as well as borate of soda, and for that reason it is an excellent reagent for blowpipe a.n.a.lysis.

All experiments in which borax is employed should be effected upon platinum wire. The hook of the wire should be heated red hot, and then dipped into the powdered borax. This should be exposed to the oxidation flame, when it will be fused to a bead, which adheres to the hook. This should be then dipped into the powdered substance, which will adhere to it if it is hot; but if the bead is cool, it must be previously moistened. Expose this bead to the oxidation flame until it ceases to change, then allow it to cool, when it should be exposed to the reduction flame. Look for the following in the oxidation flame:

(1.) Whether the heated substance is fused to a clear bead or not, and whether the bead remains transparent after cooling. The beads of some substances, for instance those of the alkaline earths, are clear while hot; but upon cooling, are milk-white and enamelled. Some substances give a clear bead when heated and when cold, but appear enamelled when heated intermittingly or with a flame which changes often from oxidation to reduction, or with an unsteady flame produced by too strong a blast. The reason is an incomplete fusion, while from the basic borate compound a part of the base is separated. As the boracic acid is capable of dissolving more in the heat, a bead will be clear while hot, enamelled when cold, as a part in the latter instance will become separated.

(2.) Whether the substance dissolves easily or not, and whether it intumesces from arising gases.

(3.) Whether the bead, when exposed to the oxidation flame, exhibits any color, and whether the color remains after the bead shall have cooled, or whether the color fades.

(4.) Whether the bead exhibits any other reaction in the reduction flame.

The bead should not be overcharged with the substance under examination, or it will become colored so deeply as not to present any transparency, or the color light enough to discern its hue.

8. _Microcosmic Salt--Phosphate of Soda and Ammonia_--(NaO, NH^{4}O + PO^{5}).--Dissolve six parts of phosphate of soda (2NaO, HO, PO^{5}), and one part of pure chloride of Ammonium (NH^{4}Cl.), in two parts of boiling water, and allow it to cool. The greatest part of the formed double salt crystallizes, while the mother-liquid contains chloride of sodium, and some of the double salt. The crystals must be dissolved in as little boiling water as possible, and re-crystallized. These crystals must be dried and powdered.

When this double salt is heated, the water and the ammonia escape, while the incombustible residue has a composition similar to borax, viz., a free acid and an easily fusible salt. The effect of it is, therefore, similar to the borax. The free phosphoric acid expels, likewise, most other acids from their combinations, and combines with metallic oxides.

For supports, the platinum wire may be used, but the hook must be smaller than when borax is used, or the bead will not adhere. As for all the other experiments with this salt, the microscosmic salt is used the same as borax.

9. _Nitrate of Cobalt._--(CoO, NO^{5}).--This salt can be prepared by dissolving pure oxide of cobalt in diluted nitric acid, and evaporating to dryness with a low heat. The dry residue should be dissolved in ten parts of water, and filtered. The filtrate is now ready for use, and should be kept in a bottle with a gla.s.s stopper. If the pure oxide of cobalt cannot be procured, then it may be prepared by mixing two parts of finely powdered _glance of cobalt_ with four parts of saltpetre, and one part of dry carbonate of pota.s.sa with one part of water free from carbonate of soda. This mixture should be added in successive portions into a red-hot Hessian crucible, and the heat continued until the ma.s.s is fused, or at least greatly diminished in volume. The cooled ma.s.s must be triturated with hot water, and then heated with hydrochloric acid until it is dissolved and forms a dark green solution, which generally presents a gelatinous appearance, occasioned by separated silica. The solution is to be evaporated to dryness, the dry residue moistened with hydrochloric acid, boiled with water, filtered and neutralized while hot with carbonate of ammonia, until it ceases to give an acid reaction with test-paper. This must now be filtered again, and carbonate of pota.s.sa added to the filtrate as long as a precipitate is produced. This precipitate is brought upon a filter and washed thoroughly, and then dissolved in diluted nitric acid. This is evaporated to dryness, and one part of it is dissolved in ten parts of water for use.

The oxide of cobalt combines, with strong heat in the oxidation flame, with various earths and infusible metallic oxides, and thus produces peculiarly colored compounds, and is therefore used for their detection; (alumina, magnesia, oxide of zinc, oxide of tin, etc.) Some of the powdered substance is heated upon charcoal in the flame of oxidation, and moistened with a drop of the solution of the nitrate of cobalt, when the oxidation flame is thrown upon it. Alumina gives a pure blue color, the oxide of zinc a bright green, magnesia a light red, and the oxide of tin a bluish-green color; but the latter is only distinctly visible after cooling.

The dropping bottle, is the most useful apparatus for the purpose of getting small quant.i.ties of fluid. It is composed of a gla.s.s tube, drawn out to a point, with a small orifice. This tube pa.s.ses through the cork of the bottle. By pressing in the cork into the neck of the bottle, the air within will be compressed, and the liquid will rise in the tube. If now we draw the cork out, with the tube filled with the fluid, and pressing the finger upon the upper orifice, the fluid can be forced out in the smallest quant.i.ty, even to a fraction of a drop.

10. _Tin._--This metal is used in the form of foil, cut into strips about half an inch wide. Tin is very susceptible of oxidation, and therefore deprives oxidized substances of their oxygen very quickly, when heated in contact with them. It is employed in blowpipe a.n.a.lysis, for the purpose of producing in gla.s.s beads a lower degree of oxidation, particularly if the substance under examination contains only a small portion of such oxide. These oxides give a characteristic color to the bead, and thus are detected. The bead is heated upon charcoal in the reduction flame, with a small portion of the tin, whereby some of the tin is melted and mixes with the bead. The bead should be reduced quickly in the reduction flame, for by continuing the blast too great a while, the oxide of tin separates the other oxides in the reduced or metallic state, while we only require that they shall only be converted into a sub-oxide, in order that its peculiar color may be recognized in the bead. The addition of too much tin causes the bead to present an unclean appearance, and prevents the required reaction.

11. _Silica_ (SiO^{3}).--This acid does not even expel carbonic acid in the wet way, but in a glowing heat it expels the strongest volatile acids. In blowpipe a.n.a.lysis, we use it fused with carbonate of soda to a bead, as a test for sulphuric acid, and in some cases for phosphoric acid. Also with carbonate of soda and borax, for the purpose of separating tin from copper.

© 2024 www.topnovel.cc