The designer of patterns for wall papers heretofore has been content to imitate other materials, and adapt the characteristics of the patterns found, say, in silk damask hangings or tapestry, or even imitate the veining of wood, or marble, or tiles; but since the revival of interest in art, the study of its history, and knowledge of style, a new impulse has been given, and patterns are constructed with more direct reference to their beauty, and interest as such, while strictly adapted to the methods of manufacture. Great pains are often taken by our princ.i.p.al makers to secure good designs and harmonious colourings, and though a manufacturer and director of works is always more or less controlled by the exigencies of the market and the demands of the tentative salesman--considerations which have no natural connection with art, though highly important as economic conditions affecting its welfare--very remarkable results have been produced, and a special development of applied design may almost be said to have come into existence with the modern use of wall papers. The manufacture suffers like most others from the keenness and unscrupulousness of commercial compet.i.tion, which leads to the production of specious imitations of _bona fide_ designs, and unauthorised use of designs originally intended for other purposes, and this of course presses unfairly upon the more conscientious maker, so long as the public do not decline to be deceived.
English wall papers are made in lengths 21 inches wide. French wall papers are 18 inches wide. This has probably been found most convenient in working in block-printing: it is obvious to any one who has seen the printers at work that a wider block than 21 inches would be unwieldy, since the block is printed by hand, being suspended from above by a cord, and guided by the workman"s hand from the well of colour, into which it is dipped, to the paper flat on a table before him.
The designer must work to the given width, and though his design may vary in depth, must never exceed 21 inches square, except where double blocks are used. His main business is to devise his pattern so that it will repeat satisfactorily over an indefinite wall s.p.a.ce without running into awkward holes or lines. It may be easy enough to draw a spray or two of leaves or flowers which will stand by themselves, but to combine them in an organic pattern which shall repeat pleasantly over a wall surface requires much ingenuity and a knowledge of the conditions of the manufacture, apart from play of fancy and artistic skill.
One way of concealing the joints of the repeat of the pattern is by contriving what is called a drop-repeat, so that, in hanging, the paper-hanger, instead of placing each repeat of pattern side by side, is enabled to join the pattern at a point its own depth below, which varies the effect, and arranges the chief features or ma.s.ses on an alternating plan.
The modern habit of regarding the walls of a room chiefly as a background to pictures, furniture, or people, and perhaps the smallness of the average room, has brought rather small, thickly dispersed, leafy patterns into vogue, retiring in colour for the most part. While, however, we used to see rotund and accidental bunches of roses (the pictorial or sketchy treatment of which contrasted awkwardly with their formal repet.i.tion), we now get a certain sense of adaptation, and the necessity of a certain flatness of treatment; and most of us who have given much thought to the subject feel that when natural forms are dealt with, under such conditions, suggestion is better than any attempt at realisation, or naturalistic or pictorial treatment, and that a design must be constructed upon some systematic plan, if not absolutely controlled by a geometric basis.
Wall papers are printed from blocks prepared from designs, the outlines of which are reproduced by means of flat bra.s.s wire driven edgeways into the wood block. One block for each tint is used. First one colour is printed on a length of paper, a piece of 12 yards long and 21 inches wide, which is pa.s.sed over sticks suspended across the workshop. When the first colour is dry the next is printed, and so on; the colours being mixed with size and put in shallow trays or wells, into which the blocks are dipped.
A cheaper kind is printed by steam power from rollers on which the design has been reproduced in the same way by bra.s.s wire, which holds the colour; but in the case of machine-printed papers all the tints are printed at once. Thus the pattern is often imperfect and blurred.
A more elaborate and costly kind of wall paper is that which is stamped and gilded, in emulation of stamped and gilded leather, which it resembles in effect and quality of surface. For this method the design is reproduced in relief as a _repoussee_ bra.s.s plate, and from this a mould or matrix is made, and the paper being damped is stamped in a press into the matrix, and so takes the pattern in relief, which is generally covered with white metal and lacquered to a gold hue, and this again may be rubbed in with black, which by filling the interstices gives emphasis to the design and darkens the gold to bronze; or the gilded surface may be treated in any variety of colour by means of painting or lacquer, or simply relieved by colouring the ground.
But few of us own our own walls, or the ground they stand upon: but few of us can afford to employ ourselves or skilled artists and craftsmen in painting our rooms with beautiful fancies: but if we can get well-designed repeating patterns by the yard, in agreeable tints, with a pleasant flavour perchance of nature or antiquity, for a few shillings or pounds, ought we not to be happy? At all events, wall-paper makers should naturally think so.
WALTER CRANE.
FICTILES
Earliest amongst the inventions of man and his endeavour to unite Art with Craft is the Fictile Art. His first needs in domestic life, his first utensils, his first efforts at civilisation, came from the Mother Earth, whose son he believed himself to be, and his ashes or his bones returned to Earth enshrined in the fictile vases he created from their common clay. And these Fictiles tell the story of his first Art-instincts, and of his yearnings to unite beauty with use. They tell, too, more of his history than is enshrined and preserved by any other art; for almost all we know of many a people and many a tongue is learned from the fictile record, the sole relic of past civilisations which the Destroyer Time has left us.
Begun in the simplest fashion, fashioned by the simplest means, created from the commonest materials, Fictile Art grew with man"s intellectual growth, and Fictile Craft grew with his knowledge; the latter conquering, in this our day, when the craftsman strangles the artist alike in this as in all other arts. To truly foster and forward the art, the craftsman and the artist should, where possible, be united, or at least should work in common, as was the case when, in each civilisation, the Potter"s Art flourished most, and when the scientific base was of less account than was the art employed upon it. In its earliest stages the local clay sufficed for the formative portion of the work, and the faiences of most European countries offer more artistic results to us than do the more scientifically compounded porcelains. In the former case the native clay seemed more easily to ally itself with native art, to record more of current history, to create artistic genius rather than to be content with attempting to copy misunderstood efforts of other peoples and other times. But when science ransacked the earth for foreign bodies and ingredients, foreign decorative ideas came with them and Fictile Art was no more a vernacular one. It attempted to disguise itself, to show the craftsman superior to the artist; and then came the Manufacturer and the reign of quant.i.ty over quality, the casting in moulds by the gross and the printing by the thousands. Be it understood these remarks only apply to the introduction of porcelain into Europe.
In the East where the clay is native, the art is native; the potter"s hand and the wheel yet maintain the power of giving the potter his individuality as the creator and the artist, and save him from being but the servant and the slave of a machine.
Between faience and porcelain comes, midway, Stoneware, in which many wonderfully, and some fearfully, made things have been done of late, but which possesses the combined qualities of faience and porcelain--the ease of manipulation of the former, and the hardness and durability of the latter; but the tendency to over-elaborate the detail of its decoration, and rely less on the beauty of its semi-glossy surface than on meretricious ornament, has rather spoiled a very hopeful movement in Ceramic Art. Probably the wisest course to pursue at the present would be to pay more attention to faiences decorated with simple glazes or with "slip" decoration, and this especially in modelled work. A continuation of the artistic career of the Della Robbia family is yet an unfulfilled desideratum, notwithstanding that glazed faiences have never since their time ceased to be made, and that glazed figure work of large scale prevailed in the eighteenth century. Unglazed terra cotta, an artistic product eminently suited to our climate and to our urban architecture, has but partially developed itself, and this more in the direction of moulded and cast work than that of really plastic art; and albeit that from its dawn to this present the Fictile Art has been exercised abundantly, its role is by no means exhausted. The artist and the craftsman have yet a wide field before them, but it would be well that the former should, for some while to come, take the lead. Science has too long reigned supreme in a domain wherein she should have been not more than equal sovereign. She has had her triumphs, great triumphs too, triumphs which have been fraught with good in an utilitarian sense, but she has tyrannised too rigidly over the realm of Art. Let us now try to equalise the dual rule.
G. T. ROBINSON.
METAL WORK
In discussing the artistic aspect of metal work, we have to take into account the physical properties and appropriate treatment of the following metals: the precious metals, gold and silver; copper, both pure and alloyed with other metals, especially tin and zinc in various proportions to form the many kinds of bra.s.s and bronze; lead, with a group of alloys of which pewter is typical; and iron, in the three forms of cast iron, wrought iron, and steel. All these have been made to serve the purpose of the artist, and the manipulation of them, while presenting many differences in detail, presents certain broad characteristics in common which distinguish them from the raw material of other crafts. Whether they are found native in the metallic state as is usual in the case of gold, or combined with many other minerals in the form of ore as is more common with other metals, fire is the primal agency by which they are made available for our needs. The first stage in their manipulation is to melt and cast them into ingots of a size convenient to the purpose intended. Secondly, all these metals when pure, and many alloys, are in varying degree malleable and ductile, are, in fact, if sufficient force be applied, plastic. Hence arises the first broad division in the treatment of metals. The fluid metal may, by the use of suitable moulds, be cast at once to the shape required, or the casting may be treated merely as the starting-point for a whole series of operations--forging, rolling, chipping, chasing, wire-drawing, and many more. Another property of the metals which must be noticed is, that not only can separate ma.s.ses of metals be melted down and fused into one, but it is possible, under various conditions, of which the one invariably necessary is perfectly clean surfaces of contact, to unite separate portions of the same or different metals without fusion of the ma.s.s. For our present purpose the most important instance of this is the process of soldering, by which two surfaces are united by the application of sufficient heat to melt more fusible metal which is introduced between them, and which combines with both so as firmly to unite them on solidifying. Closely allied to this are the processes by which one metal is, for purposes of adornment or preservation from corrosion, coated with a thin film or deposit of another, usually more costly, metal.
Though hereafter electro-metallurgy may a.s.sert its claim to artistic originality as a third division, for the present all metal work, so far as its artistic aspect depends upon process, falls naturally into one of the two broad divisions of cast metal and wrought metal. Both have been employed from a time long anterior to written history; ornaments of beaten gold, and tools of cast bronze, are alike found among the relics of very early stages of civilisation, and in early stages both alike are artistic. The choice between the two processes is determined by such considerations as convenience of manufacture and the physical properties of the metals, and the different purposes in view. When a thick and comparatively ma.s.sive shape is required, it is often easier to cast it at once. For thinner and lighter forms it is usually more convenient to treat the ingot or crude product of the furnace as mere raw material for a long series of workings under the hammer, or its patent mechanical equivalents, the rolling and pressing mills of modern mechanics. The choice is further influenced by the toughness generally characteristic of wrought metal, whereas the alloys which yield the cleanest castings are by no means universally the best in other respects. Iron is the extreme instance of this: ordinary cast iron being an impure form of the metal, which is too brittle to be worked under the hammer, but is readily cast into moulds, being fluid at a temperature which, though high, is easily obtained in a blast furnace. Wrought iron, however, which is usually obtained from cast iron by a process called puddling, whereby the impurities are burnt out, does not become fluid enough to pour into moulds; but on the other hand, pieces at a white heat can be united into a solid ma.s.s by skilful hammering, a process which is called welding, and, together with the fact that from its great hardness it is usually worked hot, is specially distinctive of the blacksmith"s craft.
In no other metal is the separation between the two branches so wide as in iron. The misdirected skill of some modern iron-founders has caused the name of cast iron to be regarded as the very negative of art, and has even thrown suspicion on the process of casting itself as one of questionable honesty. Nevertheless, as a craft capable of giving final shape to metal, it has manifestly an artistic aspect, and, in fact, bronze statuary, a fine art pure and simple, is reproduced from the clay model merely by moulding and casting. We must therefore look for the artistic conditions in the preparation of the model or pattern, the impress of which in sand or loam forms the mould; the pattern may be carved in wood or modelled in clay, but the handling of the wood or clay is modified by the conditions under which the form is reproduced. And lastly, the finished object may either retain the surface formed as the metal solidifies, as in the case of the bronzes cast by the wax process, or the skin may be removed by the use of cutting tools, chisels and files and gravers, so that, as in the case of many of the better French bronzes, the finished work is strictly carved work. On the contrary, much silversmith"s work, as well as such simple objects as Chinese gongs and Indian "lotahs," after being cast approximately to shape are finished by hammer work, that is, treated as plastic material with tools that force the material into shape instead of cutting the shape out of the ma.s.s by removing exterior portions of material. Attempts to imitate both processes by casting only, thus dispensing with the cost of finishing, are common, but as they dispense likewise with all beauty in the product, even if they do not subst.i.tute varnished and tinted zinc for better metal, their success is commercial only.
We have thus three characteristic kinds of surface resulting from the conditions of treatment, marking out three natural divisions of the art: and be it noted that questions of surface or texture are all-important in the arts; beauty is skin deep. First, the natural skin of the metal solidified in contact with the mould, and more or less closely imitative of the surface of the original model, usually for our purposes a plastic surface; secondly, there is carved, technically called chased, work; and thirdly, beaten or wrought work, which in ornament is termed embossing.
Superimposed on these we have the cross divisions of the crafts according to the special metal operated on, and in the existing industrial organisation the groups thus obtained have to be further divided into many sub-heads, according to the articles produced; and finally, another commercial distinction has to be drawn which greatly affects the present condition of handicraft, that is, the division of the several trades into craftsmen and salesmen. There can be no doubt that the extent of the existing dissociation of the producing craftsman from the consumer is an evil for the arts, and that the growing preponderance of great stores is inimical to excellence of workmanship.
It is, perhaps, an advantage for the workman to be relieved from the office of salesman; the position of the village smith plying his calling in face of his customers might not suit every craft, but the services of the middleman are dearly bought at the price of artistic freedom. It is too often in the power of the middleman to dictate the quality of workmanship, too often his seeming interest to ordain that it shall be bad.
The choice of a metal for any particular purpose is determined by physical properties combined with considerations of cost. Iron, if only for its cheapness, is the material for the largest works of metal; while in the form of steel it is the best available material for many very small works, watch-springs for instance: it has the defect of liability to rust; the surfaces of other metals may tarnish, but iron rusts through. For the present only one application of cast iron concerns us--its use for grates and stoves. The point to remember is, that as the material has but little beauty, its employment should be restricted to the quant.i.ty prescribed by the demands of utility. Wrought iron, on the contrary, gives very great scope to the artist, and it offers this peculiar advantage, that the necessity of striking while the iron is hot enforces such free dexterity of handling in the ordinary smith, that he has comparatively little to learn if set to produce ornamental work, and thus renewed interest in the art has found craftsmen enough who could readily respond to the demand made upon them.
Copper, distinguished among metals by its glowing red tint, has as a material for artistic work been overshadowed by its alloys, bra.s.s and bronze; partly because they make sounder castings, partly it is to be feared from the approach of their colour to gold. Holding an intermediate position between iron and the precious metals, they are the material of innumerable household utensils and smaller architectural fittings.
Lead, tin, and zinc scarcely concern the artist to-day, though neither plumber nor pewterer has always been restricted to plain utilitarianism.
Gold and silver have been distinguished in all ages as the precious metals, both for their comparative rarity and their freedom from corrosion, and their extreme beauty. They are both extremely malleable and very readily worked. Unhappily there is little original English work being done in these metals. The more ordinary wares have all life and feeling taken out of them by mechanical finish, an abrasive process being employed to remove every sign of tool-marks. The all-important surface is thus obliterated. As to design, fashion oscillates between copies of one past period and another. A comparison of one of these copies with an original will make the distinction between the work of a man paid to do his quickest and one paid to do his best clearer than volumes of description. Indeed, when all is said, a writer can but indicate the logic that underlies the craft, or hint at the relation which subsists between the process, the material, and the finished ware: the distinction between good and bad in art eludes definition; it is not an affair of reason, but of perception.
W. A. S. BENSON.
STONE AND WOOD CARVING
The crafts of the stone and wood carver may fairly be taken in review at the same time, although they differ in themselves.
It is a misfortune that there should be so great a gulf as there is between the craftsman who is called, and considers himself to be properly called, "a sculptor" and his fellow-craftsman who is called "a carver." In these days the "sculptor" is but too often a man who would think it a condescension to execute what, for want of a better name, we must call decorative work. In truth, the sculptor is the outcome of that entire separation which has come about between the love of beauty, once common in everyday life, and art, as it is now called--a thing degraded to the purposes of a toy, a mere ornament for the rich. The sculptor is trained to make these ornaments, things which have no relation to their surroundings, but which may be placed now in a drawing-room, now in a conservatory or a public square, alone and unsheltered. He is a child of the studio.
The result of this training is, he has lost all knowledge how to produce work of a decorative character. He understands nothing of design in a wide sense, but being able to model a figure with tolerable success he rests therewith content. Being designed, as it is, in the studio, his work is wanting in sympathy with its surroundings; it does not fall into its place, it is not a part of a complete conception.
Things were not so when sculpture and what, for want of a better term, we have called "stone and wood carving" were at their prime.
The Greek craftsman could produce both the great figure of the G.o.d, which stood alone as the central object in the temple, and (working in thorough sympathy with the architect) the decorative sculpture of less importance which was attached to the building round about, and without which the beauty of the fabric was incomplete.
So also the great Florentine sculptors spent themselves with equal zeal on a door, the enclosure of a choir, a pulpit, or a tomb, which in those days meant not merely the effigy of the departed, but a complete design of many parts all full of beauty and skill.
In the great days of Mediaeval Art sculpture played a part of the highest importance. The works then produced are not only excellent in themselves, but are so designed as to form a part of the building they adorn. How thoroughly unfinished would be the west front of the Cathedral at Wells, or the portals of Amiens or Reims, without their sculpture.
How rarely can we feel this sense of satisfaction, of unity of result, between the work of the sculptor and the architect in our buildings of to-day. The figures are "stood about" like ornaments on the mantelpiece.
The architect seems as unable to prepare for them as the sculptor to make them. We seldom see congruity even between the figure and the pedestal on which it stands.
The want of this extended sympathy leads to another ill result. Wood, stone, and metal, different as they are, are treated by the artist in much the same fashion. The original model in clay seems to stand behind everything. The "artist" makes the clay model; his subordinates work it out in one or another material. The result can only be unsatisfactory because the natural limitations fixed by the qualities of the different materials have been neglected, whereas they should stand forth prominently in the mind of the artist from the moment he first conceives his design.
Marble, stones--some hard, some soft,--terra cotta, metals, or wood, each demand a difference of treatment. For example, the fibrous nature of wood enables the craftsman to produce work which would fall to pieces at the first blow if executed in stone. The polished and varied surface of marble demands a treatment of surface and section of mouldings which in stone would seem tame and poor. Again, it must not be forgotten that most works in stone or marble are built up. They are composed of many blocks standing one on the other. With wood it is quite different. Used in thick pieces it splits; good wood-work is therefore framed together, the framing and intermediate panelling lending itself to the richest decoration; but anything in the design which suggests stone construction is obviously wrong. In short, wood must be treated as a material that is fibrous and tenacious, and in planks or slabs; stone or marble as of close, even texture, brittle and in blocks.
Consequent on these differences of texture, we find that the tools and method of handling them used by the wood-carver differ in many respects from those used by the worker in stone or marble. One material is scooped and cut out, the other is attacked by a constant repet.i.tion of blows.
In the history of Mediaeval Art we find that the craft of the stone-carver was perfectly understood long before that of his brother craftsman in wood. Whilst the first had all through Europe attained great perfection in the thirteenth century, the second did not reach the same standard till the fifteenth, and with the cla.s.sic revival it died out. Nothing displays more fully the adaptation of design and decoration to the material than much of the fifteenth-century stall-work in our English cathedrals. These could only be executed in wood; the design is suited to that material only; but when the Italian influence creeps in, the designs adopted are in fact suited to fine stone, marble, or alabaster, and not to wood.
Until the craftsman in stone and wood is more of an architect, and the architect more of a craftsman, we cannot hope for improvement.
SOMERS CLARKE.
FURNITURE