For tempering iron instruments, there are recipes given by the monk Theophilus, but they are unfortunately quite unquotable, being treated with mediaeval frankness of expression.

St. Dunstan was the patron of goldsmiths and blacksmiths. He was born in 925, and lived in Glas...o...b..ry, where he became a monk rather early in life. He not only worked in metal, but was a good musician and a great scholar, in fact a genuine rounded man of culture. He built an organ, no doubt something like the one which Theophilus describes, which, Bede tells us, being fitted with "bra.s.s pipes, filled with air from the bellows, uttered a grand and most sweet melody." Dunstan was a favourite at court, in the reign of King Edmund. Enemies were plentiful, however, and they spread the report that Dunstan evoked demoniac aid in his almost magical work in its many departments. It was said that occasionally the evil spirits were too aggravating, and that in such cases Dunstan would stand no nonsense. There is an old verse:

"St. Dunstan, so the story goes, Once pulled the devil by the nose, With red hot tongs, which made him roar That he was heard three miles or more!"

The same story is told of St. Eloi, and probably of most of the mediaeval artistic spirits who were unfortunate enough to be human in their temperaments and at the same time pious and struggling. He was greatly troubled by visitations such as persecuted St. Anthony.

On one occasion, it is related that he was busy at his forge when this fiend was unusually persistent: St. Dunstan turned upon the demon, and grasped its nose in the hot pincers, which proved a most successful exorcism. In old portraits, St. Dunstan is represented in full ecclesiastical habit, holding the iron pincers as symbols of his prowess.

He became Archbishop of Canterbury after having held the Sees of Worcester and London. He journeyed to Rome, and received the pallium of Primate of the Anglo-Saxons, from Pope John XII. Dunstan was a righteous statesman, twice reproving the king for evil deeds, and placing his Royal Highness under the ban of the Church for immoral conduct! St. Dunstan died in 988.

[Ill.u.s.tration: WROUGHT IRON HINGE, FRANKFORT]

Wrought iron has been in use for many centuries for hinges and other decorations on doors; a necessity to every building in a town from earliest times. The word "hinge" comes from the Saxon, _hengen_, to hang. Primitive hinges were sometimes sockets cut in stone, as at Torcello; but soon this was proved a clumsy and inconvenient method of hanging a door, and hinges more simple in one way, and yet more ornate, came into fashion. Iron hinges were found most useful when they extended for some distance on to the door; this strengthened the door against the invasion of pirates, when the church was the natural citadel of refuge for the inhabitants of a town, and also held it firmly from warping. At first single straps of iron were clamped on: then the natural craving for beauty prevailed, and the hinges developed, flowering out into scrolls and leaves, and spreading all over the doors, as one sees them constantly in mediaeval examples. The general scheme usually followed was a straight strap of iron flanked by two curving horns like a crescent, and this motive was elaborated until a positive lace of iron, often engraved or moulded, covered the surface of the door, as in the wonderful work of Biscornette at Notre Dame in Paris.

Biscornette was a very mysterious worker, and no one ever saw him constructing the hinges. Reports went round that the devil was helping him, that he had sold his soul to the King of Darkness in order to enlist his a.s.sistance in his work; an instance of aesthetic altruism almost commendable in its exotic zeal. Certain jealous artificers even went so far as to break off bits of the meandering iron, to test it, but with no result; they could not decide whether it was cast or wrought. Later a legend grew up explaining the reason why the central door was not as ornate as the side doors: the story was that the devil was unable to a.s.sist Biscornette on this door because it was the aperture through which the Host pa.s.sed in processions. It is more likely, however, that the doors were originally uniform, and that the iron was subsequently removed for some other reason.

The design is supposed to represent the Earthly Paradise. Sauval says: "The sculptured birds and ornaments are marvellous. They are made of wrought iron, the invention of Biscornette and which died with him. He worked the iron with an almost incredible industry, rendering it flexible and tractable, and gave it all the forms and scrolls he wished, with a "douceur et une gentillesse" which surprised and astonished all the smiths." The iron master Gaegart broke off fragments of the iron, and no member of the craft has ever been able to state with certainty just how the work was accomplished. Some think that it is cast, and then treated with the file; others say that it must have been executed by casting entire, with no soldering. In any case, the secret will never be divulged, for no one was in the confidence of Biscornette.

Norman blacksmiths and workers in wrought iron were more plentiful than goldsmiths. They had, in those warlike times, more call for arms and the ma.s.sive products of the forge than for gaudy jewels and table appointments. One of the doors of St. Alban"s Abbey displays the skill of Norman smiths dealing with this stalwart form of ornament.

Among special artists in iron whose names have survived is that of Jehan Tonquin, in 1388. Earlier than that, a cutler, Thomas de Fieuvillier, is mentioned, as having flourished about 1330.

[Ill.u.s.tration: BISCORNETTE"S DOORS AT PARIS]

Elaborate iron work is rare in Germany; the Germans always excelled rather in bronze than in the sterner metal. At St. Ursula"s in Cologne there are iron floriated hinges, but the design and idea are French, and not native.

One may usually recognize a difference between French and English wrought iron, for the French is often in detached pieces, not an outgrowth of the actual hinge itself, and when this is found in England, it indicates French work.

Ornaments in iron were sometimes cut out of flat sheet metal, and then hammered into form. In stamping this flat work with embossed effect, the smith had to work while the iron was hot,--as Sancho Panza expressed it, "Praying to G.o.d and hammering away." Dies were made, after a time, into which the design could be beaten with less effort than in the original method.

One of the quaintest of iron doors is at Krems, where the gate is made up of square sheets of iron, cut into rude pierced designs, giving scenes from the New Testament, and hammered up so as to be slightly embossed.

The Guild of Blacksmiths in Florence flourished as early as the thirteenth century. It covered workers in many metals, copper, iron, bra.s.s, and pewter included. Among the rules of the Guild was one permitting members to work for ready money only. They were not allowed to advertise by street crying, and were fined if they did so. The Arms of the Guild was a pair of furnace tongs upon a white field. Among the products of the forge most in demand were the iron window-gratings so invariable on all houses, and called by Michelangelo "kneeling windows," on account of the bulging shape of the lower parts.

One famous iron worker carried out the law of the Guild both in spirit and letter to the extent of insisting upon payment in advance!

This was Nicolo Grosso, who worked about 1499. Vasari calls him the "money grabber." His specialty was to make the beautiful torch holders and lanterns such as one sees on the Strozzi Palace and in the Bargello.

In England there were Guilds of Blacksmiths; in Middles.e.x one was started in 1434, and members were known as "in the worship of St.

Eloi." Members were alluded to as "Brethren and Sisteren,"--this term would fill a much felt vacancy! Some of the Guilds exacted fines from all members who did not pay a proper proportion of their earnings to the Church.

Another general use of iron for artistic purposes was in the manufacture of grilles. Grilles were used in France and England in cathedrals.

The earliest Christian grille is a pierced bronze screen in the Church of the Nativity in Bethlehem.

In Hildesheim is an original form of grille; the leaves and rosettes in the design are pierced, instead of being beaten up into bosses.

This probably came from the fact that the German smith did not understand the Frankish drawing, and supposed that the shaded portions of the work were intended to be open work. The result, however, is most happy, and a new feature was thus introduced into grille work.

[Ill.u.s.tration: WROUGHT IRON FROM THE BARGELLO, FLORENCE]

Many grilles were formed by the smith"s taking an iron bar and, under the intense heat, splitting it into various branches, each of which should be twisted in a different way. Another method was to use the single slighter bar for the foundation of the design, and welding on other volutes of similar thickness to make the scroll work a.s.sociated with wrought iron.

Some of the smiths who worked at Westminster Abbey are known by name; Master Henry Lewis, in 1259, made the iron work for the tomb of Henry III. A certain iron fragment is signed Gilibertus. The iron on the tomb of Queen Eleanor is by Thomas de Leighton, in 1294.

Lead workers also had a place a.s.signed to them in the precincts, which was known as "the Plumbery." In 1431 Master Roger Johnson was enjoined to arrest or press smiths into service in order to finish the ironwork on the tomb of Edward IV.

Probably the most famous use of iron in Spain is in the stupendous "_rejas_," or chancel screens of wrought iron; but these are nearly all of a late Renaissance style, and hardly come within the scope of this volume. The requirements of Spanish cathedrals, too, for wrought iron screens for all the side chapels, made plenty of work for the iron masters. In fact, the "_rejeros_," or iron master, was as regular an adjunct to a cathedral as an architect or a painter.

Knockers were often very handsome in Spain, and even nail heads were decorated.

An interesting specimen of iron work is the grille that surrounds the tomb of the Scaligers in Verolla. It is not a hard stiff structure, but is composed of circular forms, each made separately, and linked together with narrow bands, so that the construction is flexible, and is more like a gigantic piece of chain mail than an iron fence.

Quentin Matsys was known as the "blacksmith of Antwerp," and is reported to have left his original work among metals to become a painter. This was done in order to marry the lady of his choice, for she refused to join her fate to that of a craftsman. She, however, was ready to marry a painter. Quentin, therefore, gave up his hammer and anvil, and began to paint Madonnas that he might prosper in his suit. Some authorities, however, laugh at this story, and claim that the specimens of iron work which are shown as the early works of Matsys date from a time when he would have been only ten or twelve years old, and that they must therefore have been the work of his father, Josse Matsys, who was a locksmith. The well-cover in Antwerp, near the cathedral, is always known as Quentin Matsys"

well. It is said that this was not constructed until 1470, while Quentin was born in 1466.

The iron work of the tomb of the Duke of Burgundy, in Windsor, is supposed to be the work of Quentin Matsys, and is considered the finest grille in England. It is wrought with such skill and delicacy that it is more like the product of the goldsmith"s art than that of the blacksmith.

[Ill.u.s.tration: MOORISH KEYS, SEVILLE]

Another object of utility which was frequently ornamented was the key. The Key of State, especially, was so treated. Some are nine or ten inches long, having been used to present to visiting grandees as typical of the "Freedom of the City." Keys were often decorated with handles having the appearance of Gothic tracery. In an old book published in 1795, there is an account of the miraculous Keys of St. Denis, made of silver, which they apply to the faces of these persons who have been so unfortunate as to be bitten by mad dogs, and who received certain and immediate relief in only touching them. A key in Valencia, over nine inches in length, is richly embossed, while the wards are composed of decorative letters, looking at first like an elaborate sort of filigree, but finally resolving themselves into the autographic statement: "It was made by Ahmed Ahsan." It is a delicate piece of thirteenth or fourteenth century work in iron.

Another old Spanish key has a Hebrew inscription round the handle: "The King of Kings will open: the King of the whole Earth will enter," and, in the wards, in Spanish, "G.o.d will open, the King will enter."

The iron smiths of Barcelona formed a Guild in the thirteenth century: it is to be regretted that more of their work could not have descended to us.

A frank treatment of locks and bolts, using them as decorations, instead of treating them as disgraces, upon the surface of a door, is the only way to make them in any degree effective. As Pugin has said, it is possible to use nails, screws, and rivets, so that they become "beautiful studs and busy enrichments." Florentine locksmiths were specially famous; there also was a great fashion for damascened work in that city, and it was executed with much elegance.

In blacksmith"s work, heat was used with the hammer at each stage of the work, while in armourer"s or locksmith"s work, heat was employed only at first, to achieve the primitive forms, and then the work was carried on with chisel and file on the cold metal.

Up to the fourteenth century the work was princ.i.p.ally that of the blacksmith, and after that, of the locksmith.

The mention of arms and armour in a book of these proportions must be very slight; the subject is a vast one, and no effort to treat it with system would be satisfactory in so small a s.p.a.ce. But a few curious and significant facts relating to the making of armour may be cited.

The rapid decay of iron through rust--rapid, that is to say, in comparison with other metals--is often found to have taken place when the discovery of old armour has been made; so that gold ornaments, belonging to a sword or other weapon, may be found in excavating, while the iron which formed the actual weapon has disappeared.

Primitive armour was based on a leather foundation, hence the name cuira.s.s, was derived from _cuir_ (leather). In a former book I have alluded to the armour of the nomadic tribes, which is described by Pausanias as coa.r.s.e coats of mail made out of the hoofs of horses, split, and laid overlapping each other, making them "something like dragon"s scales," as Pausanias explains; adding for the benefit of those who are unfamiliar with dragons" anatomy, "Whoever has not _yet_ seen a dragon, has, at any rate, seen a pine cone still green. These are equally like in appearance to the surface of this armour." These h.o.r.n.y scales of tough hoofs undoubtedly suggested, at a later date, the use of thick leather as a form of protection, and the gradual evolution may be imagined.

The art of the armourer was in early mediaeval times the art of the chain maker. The chain coat, or coats of mail, reached in early days as far as the knees. Finally this developed into an entire covering for the man, with head gear as well; of course this form of armour allowed of no real ornamentation, for there was no s.p.a.ce larger than the links of the chain upon which to bestow decoration.

Each link of a coat of mail was brought round into a ring, the ends overlapped, and a little rivet inserted. Warriors trusted to no solder or other mode of fastening. All the magnificence of knightly apparel was concentrated in the surcoat, a splendid embroidered or gem-decked tunic to the knees, which was worn over the coat of mail. These surcoats were often trimmed with costly furs, ermine or vair, the latter being similar to what we now call squirrel, being part gray and part white. Cinderella"s famous slipper was made of "vair," which, through a misapprehension in being translated "verre," has become known as a gla.s.s slipper.

[Ill.u.s.tration: ARMOUR, SHOWING MAIL DEVELOPING INTO PLATE]

After a bit, the makers of armour discovered that much tedious labor in chain making might be spared, if one introduced a large plate of solid metal on the chest and back. This was in the thirteenth century. The elbows and knees were also treated in this way, and in the fourteenth century, the principle of armour had changed to a set of separate plates fastened together by links. This was the evolution from mail to plate armour. A description of Charlemagne as he appeared on the field of battle, in his armour, is given by the Monk of St. Gall, his biographer, and is dramatic. "Then could be seen the iron Charles, helmeted with an iron helmet, his iron breast and broad shoulders protected with an iron breast plate; an iron spear was raised on high in his left hand, his right always rested on his unconquered iron falchion.... His shield was all of iron, his charger was iron coloured and iron hearted.... The fields and open s.p.a.ces were filled with iron; a people harder than iron paid universal homage to the hardness of iron. The horror of the dungeon seemed less than the bright gleam of iron. "Oh, the iron! woe for the iron!" was the confused cry that rose from the citizens. The strong walls shook at the sight of iron: the resolution of young and old fell before the iron."

By the end of the fourteenth and early fifteenth centuries, whole suits of armour were almost invariable, and then came the opportunity for the goldsmith, the damascener, and the niellist. Some of the leading artists, especially in Italy, were enlisted in designing and decorating what might be called the _armour-de-luxe_ of the warrior princes! The armour of horses was as ornate as that of the riders.

The sword was always the most imposingly ornamented part of a knight"s equipment, and underwent various modifications which are interesting to note. At first, it was the only weapon invariably at hand: it was enormously large, and two hands were necessary in wielding it. As the arquebuse came into use, the sword took a secondary position: it became lighter and smaller. And ever since 1510 it is a curious fact that the decorations of swords have been designed to be examined when the sword hangs with the point down; the earlier ornament was adapted to being seen at its best when the sword was held upright, as in action. Perhaps the later theory of decoration is more sensible, for it is certain that neither a warrior nor his opponent could have occasion to admire fine decoration at a time when the sword was drawn! That the arts should be employed to satisfy the eye in times of peace, sufficed the later wearers of ornamented swords.

Toledo blades have always been famous, and rank first among the steel knives of the world. Even in Roman times, and of course under the Moors, Toledo led in this department. The process of making a Toledo blade was as follows. There was a special fine white sand on the banks of the Tagus, which was used to sprinkle on the blade when it was red hot, before it was sent on to the forger"s. When the blade was red hot from being steeped four-fifths of its length in flame, it was dropped point first into a bucket of water. If it was not perfectly straight when it was withdrawn, it was beaten into shape, more sand being first put upon it. After this the remaining fifth of the blade was subjected to the fire, and was rubbed with suet while red hot; the final polish of the whole sword was produced by emery powder on wooden wheels.

[Ill.u.s.tration: DAMASCENED HELMET]

Damascening was a favourite method of ornamenting choice suits of armour, and was also applied to bronzes, cabinets, and such pieces of metal as lent themselves to decoration. The process began like niello: little channels for the design were hollowed out, in the iron or bronze, and then a wire of bra.s.s, silver, or gold, was laid in the groove, and beaten into place, being afterwards polished until the surface was uniform all over. One great feature of the art was to sink the incision a little broader at the base than at the top, and then to force the softer metal in, so that, by this undercutting, it was held firmly in place. Cellini tells of his first view of damascened steel blades. "I chanced," he says, "to become possessed of certain little Turkish daggers, the handle of which together with the guard and blade were ornamented with beautiful Oriental leaves, engraved with a chisel, and inlaid with gold. This kind of work differed materially from any which I had as yet practised or attempted, nevertheless I was seized with a great desire to try my hand at it, and I succeeded so admirably that I produced articles infinitely finer and more solid than those of the Turks." Benvenuto had such a humble opinion of his own powers! But when one considers the pains and labour expended upon the arts of damascening and niello, one regrets that the workers had not been inspired to attempt dentistry, and save so much unnecessary individual suffering!

On the Sword of Boabdil are many inscriptions, among them, "G.o.d is clement and merciful," and "G.o.d is gifted with the best memory."

© 2024 www.topnovel.cc