[Ill.u.s.tration: 25.--Centre of a Tatted Couvrette.]
26.--_Tatted Lace_.
Materials: Messrs. Walter Evans and Co."s tatting cotton No. 30; tatting-pin No. 2.
[Ill.u.s.tration: 26.--Tatted Lace.]
This very simple lace consists of scallops which look as if they were slightly gathered. It must be worked with tatting cotton. Each scallop consists of 5 plain, 1 purl, 5 plain, then alternately 5 purled st.i.tches, draw up these st.i.tches till the cotton between the 1st and last st.i.tch is two-fifths of an inch long, and work a 2nd similar scallop at a short distance from the 1st. But in the following scallops fasten each to the last purl of the preceding scallop instead of working the 1st purl.
27.--_Tatted Lace_.
Materials: Messrs. Walter Evans and Co."s tatting cotton No. 50 or 80; tatting-pin No. 3.
[Ill.u.s.tration: 27.--Tatted Lace.]
This pretty lace is worked with fine tatting cotton. Work with 2 threads; the knots are worked over the cotton, which is held in the right hand. Work first the outer scallops of the lace
Fasten both ends of cotton together and make 10 double, divided by 1 purl, turn the work so as to turn the wrong side upwards, fasten the cotton over which you work on to the last purl, go back over the same row, miss 1 purl next to the cotton with which you work, 9 double divided by 1 purl, fastening the cotton over which you work on the next purl of the 1st row after every double st.i.tch. This forms 1 scallop. *
Turn the work downwards (that is, the purl st.i.tch must be turned downwards), make 4 times 2 double, 1 purl, 1 purled st.i.tch: this is the straight row between 2 outer scallops of the lace. Then work a scallop like the preceding one, fastening it from ill.u.s.tration after the first row on the middle one of the 9 outer purl of the preceding scallop, with the cotton over which you work; repeat from * till the lace is long enough, and fasten the cotton. Knot both ends together again, fasten the cotton over which you work on the first purl of the first scallop, make 9 double, 1 short purl, 1 double, turn so that the upper edge of the row is turned downwards, and the scallops upwards, 5 double, fasten the 2 middle purl of the 4 of the next straight row together by drawing the cotton, with which you are working through the 2nd purl, so as to form a loop, draw the cotton over which you work through this loop and draw up the latter; work 5 double, fasten the cotton over which you work on to the short purl worked after 9 double, turn the work so that the outer scallops of the lace are turned downwards, 10 double, fasten the cotton over which you work on the first purl of the next scallop, repeat from *, and fasten the cotton. After having fastened both ends together again, turn the work the right side upwards and the outer scallops upwards also, fasten the cotton over which you work on to the short purl which is under the first loop; * work 4 times 2 double, 1 purl, 2 double, fasten the cotton over which you work on the purl under the next loop, and repeat from * till the lace is completed.
28.--_Collar in Tatting and Darned Netting_.
Materials: Messrs. Walter Evans and Co."s tatting cotton No. 40; tatting-pin No. 3; Messrs. Walter Evans and Co."s French embroidery cotton No. 60; square netting.
[Ill.u.s.tration: 28.--Collar in Tatting and Darned Netting]
The pattern is worked with very fine cotton; the netted grounding over a mesh measuring two-fifths of an inch round. The collar is ornamented round the outer edge with a tatted lace. Work a straight strip of netting for the grounding; begin with 2 st.i.tches, work 18 rows backwards and forwards, increasing 1 at the end of each row, so that the last row has 19 holes; work 1 row without increasing; then continue to work with the same number of st.i.tches, increasing 1 at the end of one row and decreasing 1 at the end of the other. When the strip is sufficiently long, work 1 row again without increasing or decreasing, and form the side by making 18 rows, decreasing 1 st.i.tch at the end of each, cast off the 2 last st.i.tches on 1 st.i.tch without forming a new st.i.tch on the needle. Trace the outline of the collar on the grounding with thick cotton, and begin to darn it from ill.u.s.tration. When the darning is completed work the tatted lace with the same cotton, as follows:--6 double, 1 short purl, alternately, 3 times 3 double, 1 purl, 6 double, draw up the st.i.tch so as to form a scallop leaving one-fifth of an inch between the first and last st.i.tch; work a second scallop at a short distance from the first, and so on; every scallop is fastened on to the preceding one after the first 3 double st.i.tches. Work a row of double overcast st.i.tch between the darned netting and the tatted lace; work this row over the cotton tracing, marking the outline of the collar on the grounding and over the cotton between the tatted scallops. Work also a row of double overcast round the neck part, gathering in the collar a little if necessary. Cut away the netting on the wrong side close to the row of overcast st.i.tches.
29.--_Mignardise and Tatting_.
Materials: Messrs. Walter Evans and Co."s tatting cotton No. 40; fine mignardise braid.
[Ill.u.s.tration: 29.--Mignardise and Tatting.]
Patterns formed of mignardise and tatting are of quite new style, and look very pretty. The insertion is easy to work by the following process:--Make first a circle, as follows: 1 plain st.i.tch, 2 double, 1 purl, 6 double, 1 purl, 2 double, 1 plain; fasten the cotton on to one side of the mignardise, at the distance of about five-eighths of an inch, by taking 2 loops of it together; work a second circle at a short distance from the first, and so on. When the strip of insertion is sufficiently long, work in the same manner on the other side of the mignardise. This kind of work is destined to become very popular, and nothing can be more light and graceful than the union of mignardise and tatting.
30.--_Linen Bag for Cotton_.
Materials: Fine linen, 6 inches square; Messrs. Walter Evans and Co."s tatting cotton No. 40.
[Ill.u.s.tration: 30.--Linen Bag for Cotton.]
The bag seen in ill.u.s.tration No. 30 is meant to keep the cotton for working a couvrette; it consists of a round piece, measuring 6 inches across, which is hemmed all round, and trimmed with a tatted lace. It is drawn together at top.
31.--_Tatting Insertion_.
Materials: Messrs. Walter Evans and Co."s cotton No. 30.
The insertion shown in ill.u.s.tration No. 31 is composed in two similar halves. Begin the first in the following way:--10 double, 1 purl, 3 double, 1 purl, 10 double, join the st.i.tches into a circle, and work a second similar circle at a distance of one-third of an inch; instead of the 1st purl, draw the cotton through the 2nd purl of the first-worked circle; leave an interval of one-eighth of an inch, and repeat the two rounds till the insertion is sufficiently long. Then tat round the pieces of cotton which join the two rounds, work round the longest 10 double, and round the shortest 4 double, inserting the shuttle alternately once upwards and once downwards, but for the rest proceeding as in the common b.u.t.ton-hole st.i.tch. When the first half is completed, work the second in the same way, and fasten it on to the first with the purl.
[Ill.u.s.tration: 31.--Tatting Insertion.]
32.--_Tatting Insertion_.
Materials: Messrs. Walter Evans and Co."s cotton No. 30.
[Ill.u.s.tration: 32.--Tatting Insertion.]
The pretty effect of the insertion shown in ill.u.s.tration No. 32 is obtained by means of longer and shorter purl. Work as follows:--Join 9 double into a circle, 1 long purl, 3 double, 1 long purl, 4 double *.
After an interval of five-eighths of an inch, begin the large figure of the pattern: 2 double, 1 small purl, 2 double, draw the cotton through the last purl of the small circle, 2 double, drawn through the 1st purl of the same circle, 2 double, 1 small purl, 2 double, 1 long purl, 2 double, 1 small purl, 2 double, repeat 6 times more from *, and draw up.
After an interval of five-eighths of an inch comes another small circle: 4 double, draw the cotton through the last purl of the large figure, 3 double, draw the cotton through the next long purl of the same figure, 2 double, 1 long purl, 3 double, 1 long purl, 4 double. Repeat the pattern for the length of insertion required. The threads which join the small circles are worked over with 7 double in the manner described above, only the cotton at the princ.i.p.al figure must be left loose the width of a straw, so as to imitate a long purl. Complete the insertion from ill.u.s.tration by tatting round the small circles of 16 double on the other side (but in the contrary direction), form no purl, but draw the cotton through the long purl of the large figure; the threads which join the 2 circles are likewise drawn through the middle long purl of the large figure; this thread is then tatted over with 7 double, like the opposite outer edge.
33.--_Tatted Square or Diamond_.
Materials: If for couvrettes, Messrs. Walter Evans and Co."s tatting cotton No. 20, or crochet cotton No. 4; tatting-pin No. 3. For d"oyleys, tatting cotton No. 50; tatting-pin No. 2. For headdresses, tatting cotton No. 80; tatting-pin No. 2.
The square is composed first of nine 4-branched patterns, worked in 3 rows of 3 patterns each, and joined on one to the other with purl. Each pattern consists of 4 branches close to each other, and each branch consists of 7 double, 1 purl, 7 double; when the 4 branches of one pattern are completed, cut off the cotton, and fasten both ends together so as to form a small circle in the centre. Then work a second pattern, which is fastened on to the first and second branches of the first pattern, instead of working the purl st.i.tch; work a third pattern, which is fastened in the same manner on to the second pattern. Then work 2 more rows exactly the same as can be seen in ill.u.s.tration.
[Ill.u.s.tration: 33.--Tatted Square.]
*For the border of the square, fasten the cotton on the first purl of the first pattern, work 4 double, 13 purl divided by 2 double, 4 double, draw up the st.i.tches close, fasten the cotton again on to the same purl of the first pattern *, and work the following scallop at a short distance:--4 double fastened on the last purl of the preceding circle, 10 purl divided by 2 double, 4 double, draw up the st.i.tch, leaving an interval of two-fifths of an inch between the first and the last; fasten the cotton on to the next purl which joins two patterns, repeat twice more from *, and continue to repeat from *.
34.--_Tatted Rosette_.
Materials: Messrs. Walter Evans and Co."s tatting cotton No. 40, or crochet cotton No. 60.
[Ill.u.s.tration: 34.--Tatted Rosette.]
This rosette is very pretty for tr.i.m.m.i.n.g _lingeries_; it is worked with very fine crochet or tatting cotton. Begin in the centre and work one circle: 16 times alternately 2 double, 1 purl, then 1 purled st.i.tch.