The circular shape is secured by the use of small-size gas pipe or limber poles bent into a large hoop. Of course guy lines may be used, but would probably be in the way. Notice that a little more material for making a wall would transform the canopy into a "Sibley" tent.
[Ill.u.s.tration: Fig. 11. Sibley awning.]
There are other shapes and combinations, but perhaps these sketches are enough in the line of suggestion.
The diagram Fig. 12 shows a method for laying out, on your cloth, the location of all the rings to make the tents and shelters. No dimensions are given and none is required. The diagram is good for any size. Most of the fastenings are found on radial lines, which are s.p.a.ced to divide a semi-circle into eight equal {169} angles, 22-1/2 degrees each; these intersect other construction lines and locate the necessary loops and rings. Figures are given at each ring which refer back to the sketch numbers.
[Ill.u.s.tration: Fig. 12. Showing how ten different tents can be made with but one piece of canvas.]
Suppose the material at hand is the widest unbleached cotton cloth, 90 inches wide, 5 yards long, or 7-1/2 feet by 15 feet. The accompanying table will give the dimensions for the various shapes from Fig. 1 to Fig. 11.
If in doubt about the location of rings on your canvas, suspend the tent by the centre ring and fasten the loops temporarily by means of safety pins, draw the tent into shape and shift the fastenings as required. The guy lines should have hooks or snaps at one end for ready attachment and removal; the other end should be provided with the usual slides for "take up." The edge of the cloth where the large ring for suspension is fastened should be bound with tape or have a double hem, for it is the edge of the door in most of the tents shown.
TABLE OF DIMENSIONS, 90 IN. MATERIAL
Size Area, Height Remarks Sq. Ft. Ft.
1 7-1/2 ft. triangle 25 6-1/4 One side open 2 6-1/2 X 15 ft. 65 6-1/4 One side open 3 6 x 7-1/2 ft. 45 4-1/2 One side open 4 7-1/2 x 8 ft. 60 5-1/2 One side open 5 7-1/2 ft. triangle 25 7-1/2 One side open 6 6-1/4 x 6-1/4 ft. 39 7 Enclosed 7 7-1/2 ft. diam. 44 6-1/2 Enclosed 8 5 x 7-1/2 ft. 37-1/2 6-1/2 2-1/2 ft. wall 9 7-1/2 x 8 ft. 60 6-1/2 No.8, with fly 10 15 ft. triangle 97 6-1/4 Enclosed 11 11-1/4 ft. circle 108 5 Canopy, no sides
{170}
Waterproofing a Tent
Dissolve half a pound of alum in two quarts of boiling water; then add two gallons of pure cold water. In this solution place the material and let it remain for a day. Dissolve a quarter of a pound of sugar of lead in two quarts boiling water, then add two gallons of cold water.
Take the material from the alum solution, wring it lightly, place in the second solution and leave for five or six hours; then wring out again lightly and allow it to dry.
[Transcriber"s note: Sugar of Lead (Lead Acetate) is toxic.]
If you want to avoid trouble with a leaky tent, the following solution is a "sure cure;" Take a gallon or two gallons of turpentine and one or two cakes of paraffin, drug store size. Chip the paraffin fairly fine; dump it into the turpentine. Place the turpentine in a pail and set same in a larger pail or a tub of hot water. The hot water will heat the turpentine, and the turpentine will melt the paraffin. Stir thoroughly, and renew your supply of hot water if necessary. Then pile your tent into a tub and pour in the turpentine and paraffin mixture.
Work the tent all over thoroughly with your hands, so that every fiber gets well saturated. You must work fast, however, as the paraffin begins to thicken as it cools; and work out of doors, in a breeze if possible, as the fumes of the turpentine will surely make you sick if you try it indoors. When you have the tent thoroughly saturated, hang it up to dry. It is not necessary to wring the tent out when you hang it up. Just let it drip. If you use too much paraffin the tent may look a little dirty after it dries, but it will be all right after you have used it once or twice.
An Open Outing Tent
_By Warren H. Miller, Editor "Field and Stream."_
To make an open outing tent, get thirteen yards of 8 oz. duck canvas, which can be bought at any department store or dry goods store for seventeen or eighteen cents a yard. This makes your total expense $2.21 for your tent. Layout the strip of canvas on the floor and cut one end square; measure up 8 inches along the edge and draw a line to the other corner. {171} From this corner layoff 7 ft. 8 in. along the edge and on the opposite side, layoff 5 ft. 9 in. beginning at the end of your 8-in. measurement. Now take a ruler and draw another diagonal across the canvas at the ends of these measurements and you have the first gore of your tent. Cut it across, turn the gore over, lay it down on the strip so as to measure off another one exactly like it.
This is the corresponding gore for the other side of the tent. To make the second pair of gores, layoff 5 ft. 9 in. along one side of the remaining strip of canvas beginning at the pointed end, and 3 ft. 10 in. on the other side. Join these points with a diagonal and you have a second gore, a duplicate of which is then cut by using it as a pattern, reversing and laying it down on the strip of canvas. To make the third gore, layoff 3 ft. 10 in, on one edge of your strip beginning at the point, and 1 ft. 11 in. on the other side. Draw a diagonal across and you have the third gore.
[Ill.u.s.tration: How to cut up your strip of canvas.]
[Ill.u.s.tration: Forester tent pattern.]
[Ill.u.s.tration: Forester tent with hood.]
You have now used up all but two yards of your canvas, plus a little left-over piece of about two feet long. Out of this little left-over piece make a triangle 1 ft. 11 in. on the side, which will form the back triangle of your tent. Now pin your three gores together to make the side of your tent, just as in the ill.u.s.trations, and pin the two sides together along the ridge. Then sew this tent up. Sew in the little back triangle and hem all around the edges. Leave a hole at the peak of the little triangle through which the ridge pole must go.
{172}
To set it up, cut three small saplings, one of which should be twelve feet long and the other two, ten feet long. Tie these two together at the ends making what the sailors call a "shears." Take the twelve-foot pole and run it down the ridge inside the tent, and out through the hole in the back. Now raise the ridge pole with one end stuck in the ground and the front end resting on the two shear poles and tie all three of them together. At the end of each seam along the hem you must work in a little eyelet hole for a short piece of twine to tie to the tent pegs. Stretch out the back triangle, pegging it down at the two corners on the ground, and then peg out each hole along the foot until the entire tent stretches out taut as in our ill.u.s.trations. Three feet from the peak along the front edge you must have another eyelet hole with a little piece of twine and you tie this out to the shear pole on each side which gives the tent the peculiar gambrel roof which it has, and which has the advantage of giving you lots more room inside than the straight tent would. You now have what is known as the "open"
forester tent.
[Ill.u.s.tration: Forester tent with hood.]
If a thunder storm comes up with a driving rain it will surely rain in at the front unless you turn the tent around by moving the poles one at a time. If you don"t want to do this you can make a hood for the front out of the two yards of canvas you have left. Simply draw a diagonal from one corner to the other of this {173} two-yard piece of duck and cut it down the diagonal, making two thin triangles which are sewed to the front edges of the open forester tent, making a hood of the shape shown in our picture. This prevents the rain beating in the opening of your tent but still lets the heat of your fire strike in and at the same time it keeps the heat in the tent as it will not flow out along the ridge pole as it does in the open type.
This tent weighs six pounds and packs into a little package fourteen inches long by seven inches wide by six: inches thick, and can be carried as a shoulder strap or put in a back pack or any way you wish to take it. It will sleep three boys, or two men and a boy, very comfortably indeed. While it really does not need to be water-proofed, as it immediately shrinks tight after the first rain, you can water-proof it if you wish by making a solution of ten ounces of quick lime with four ounces of alum in ten quarts of water. Stir occasionally until the lime has slackened. Put the tent in another pail and pour the solution over it, letting it stand twelve hours.
Take out and hang it on the clothes-line to dry. It will then be entirely waterproof.
To make a good night fire in front of the tent, drive two stout stakes three feet long in the ground about three feet from the mouth of the tent; pile four logs one on top of the other against these stakes or take a large flat stone and rest it against it. Make two log andirons for each side of the fire and build your fire in the s.p.a.ce between them. It will give you a fine cheerful fire and all the heat will be reflected by the back logs into the tent, making it warm and cheerful.
Inside you can put your browse bags stuffed with balsam browse; or pile up a mountain of dry leaves over which you can stretch your blankets. Pile all the duffle way back in the peak against the little back triangle where it will surely keep dry and will form a sort of back for your pillows. You will find the forester tent lighter and warmer than the ordinary lean-to, as it reflects the heat better.
After a couple of weeks in it you will come home with your lungs so full of ozone that it will be impossible to sleep in an ordinary room without feeling smothered.
Canoeing, Rowing and Sailing (Prepared with the cooperation of Mr. Arthur A. Carey, Scout Master, Boy Scout ship Pioneer; Mr. Carleton E. Sholl, Captain Lakanoo Boat Club Crew; Mr. Frederick K. Vreeland, Camp-Fire Club of America. and Mr. R. F. Tims, Vice-Commodore, American Canoe a.s.sociation.)
The birch-bark canoe is the boat of the North American Indians, and our modern canvas canoes are made, with some {174} variations, on the Indian model. With the possible exception of the Venetian gondola, the motion of a canoe is more graceful than that of any other boat propelled by hand; it should be continuous and gliding, and so silent that it may be brought up in the night to an animal or enemy, Indian fashion, without making any sound, and so take them by surprise.
[Ill.u.s.tration: Canoeing stroke (a)]
175 Campcraft
Many accidents happen in canoes--not because they are unsafe when properly handled, but because they are unsafe when improperly handled--and many people do not take the trouble even to find out the proper way of managing a canoe. Many canoes have seats almost on a level with the gunwale, whereas, properly speaking, the only place to sit in a canoe is on the bottom; for a seat raises the body too high above the centre of gravity and makes the canoe unsteady and likely to upset. It is, however, difficult to paddle while sitting in the bottom of a canoe, and the best position for paddling is that of kneeling and at the same time resting back against one of the thwarts. The size of the single-blade paddle should be in proportion to the size of the boy who uses it--long enough to reach from the ground to the tip of his nose. The bow paddle may be a little shorter. The canoeman should learn to paddle equally well on either side of a canoe. When paddling on the {175} left side the top of the paddle should be held by the right hand, and the left hand should be placed a few inches above the beginning of the blade. The old Indian stroke, which is the most approved modern method for all-round canoeing, whether racing or cruising, is made with the arms almost straight--but not stiff--the arm at the top of the paddle bending only slightly at the elbow. This stroke is really a swing from the shoulder, in which there is little or no push or pull with the arm. When paddling on the left side of the canoe the right shoulder swings forward and the whole force of the body is used to push the blade of the paddle through the water, the left hand acting as a fulcrum. While the right shoulder is swung forward, the right hand is at the same time twisted at the wrist so that the thumb goes down; this motion of the wrist has the effect of turning the paddle around in the left hand--the left wrist being allowed to bend freely--so that, at the end of the stroke, the blade slides out of the water almost horizontally. If you should twist the paddle in the opposite direction it would force the head of the canoe around so that it would travel in a circle. At the recovery of the stroke the right shoulder swings back and the paddle is brought forward in a horizontal position, with the blade almost parallel to the water. It is swung forward until the paddle is at right angles across the canoe, then the blade is dipped edgewise with a slicing motion and a new stroke begins. In paddling on the right side of the canoe the position of the two hands and the motion of the two shoulders are reversed.
[Ill.u.s.tration: Canoeing stroke (b)]
Something should also be said about double paddles--that is, paddles with two blades--one at each end--as their use is becoming more general every year. With the double paddle a novice can handle a canoe, head on to a stiff wind, a feat which {176} requires skill and experience with a single blade. The doubles give greater safety and more speed and they develop chest, arm and shoulder muscles not brought into play with a single blade. The double paddle is not to be recommended to the exclusion of the single blade, but there are many times when there is an advantage in its use.
[Ill.u.s.tration: Canoeing stroke (c)]