Particular notice should be taken of such experiences, making every allowance for the exceptions that prove the rule, and then let the natural conditions be maintained in your nurseries at home. To carry this out two pupa boxes should be kept, one for those species that seem to require dry situations, and the other for the species that apparently do best with moist surroundings.
But when it is desired to maintain the pupae in a moist condition, great care must be taken not to allow any acc.u.mulation of stagnant water. The box we have described, with its bottom of perforated zinc, is well adapted for this purpose. Let it stand on a couple of strips of wood, so that any excess of moisture may readily drain through. The perforated bottom will also allow of a free circulation of air, thus securing the ventilation that is desirable in all boxes, whether wet or dry.
If you have any insects that have pupated within moist stems, they should be kept in a moist condition till they emerge. The simplest way of doing this is to support the stems in a layer of wetted but well-drained silver sand.
Forcing may be resorted to when it is required to obtain the imagines for early setting in order to get them in the cabinet before the busy season begins. The method is simple. Place the pupa box on a shelf in a room where a fire is kept every day. By this means you may get all your specimens out within a few weeks, even when you start the forcing at the beginning or middle of the winter. If, however, you require the imagines for breeding, you must be careful that the eggs are not laid long before the buds of the necessary food plants are due.
When you are expecting the appearance of perfect insects, the pupa boxes should be examined every day. A morning visit to your pupae (for most insects emerge in the morning) may reward you with the sight of a newly emerged imago, clinging to the rough surface of the box, thus affording you an opportunity of observing the wonderful expansion of the wings. But the greeting is not always of such a pleasant character, for your disappointed eyes will sometimes be cast on a host of horrid ichneumons that have just quitted a sh.e.l.l from which you were expecting a prize of some specially valued species.
CHAPTER IX
_SETTING AND PRESERVING_
_Setting and Preserving b.u.t.terflies and Moths_
Up to the present we have been dealing only with living forms--learning how to catch and rear the Lepidoptera that fall to our lot; but now we have to become acquainted with the methods of preparing our dead specimens in such a way that they may form a useful collection for future study and reference. Our first attention shall be given to the apparatus necessary for this work.
The most important requirement is the setting boards, of which several are necessary, the sizes varying according to the dimensions of the different insects to be "set." The _lengths_ of all the boards should be the same, not only for the convenience of packing when not in use, but also in order that they may, if required, be arranged neatly in the "drying house" to be presently described. The widths only will vary, and in this respect the boards must be adapted to the measurements of the insects from tip to tip when the wings are fully expanded. Thus, a set of a dozen boards, ten or twelve inches long, and from one to five inches wide, will do for a good start. Of course you may commence with a smaller number than twelve, but if you really mean to do the thing well, you will eventually require a good stock of boards.
Here, again, it may be mentioned that all the necessary requisites may be purchased ready for use, a set of boards and a drying house complete costing from ten to twenty shillings according to size and quality; but as the reader, like myself, may prefer to construct his own, I will supply him with hints and suggestions sufficient for the work.
Each board is constructed in this way. Cut out and plane up a piece of wood of the required length and breadth, and about one-eighth of an inch thick. Glue on the top of this a layer of cork about half an inch in thickness, leaving the whole under a moderate pressure until the glue is quite hard. The sheets of cork for this purpose may be bought at any naturalist"s stores; but slices cut from good large bottle corks may be made to answer equally well if you don"t mind the extra time expended in cutting and fixing.
When the glue has well set, trim off the edges of the cork flush with the sides of the wood, and then cut out a groove down the whole length of the cork, of course in the middle, and of such a size that it will just contain the bodies of the insects for which it is intended.
[Ill.u.s.tration: FIG. 60.--SECTION OF A SETTING BOARD.]
The satisfactory cutting of this groove is not a very easy matter, but if its position is first carefully marked, a long rat-tail file may be made to plough it out neatly and regularly. As an alternative the following plan is good. First cover the wood with a layer of cork about a _quarter_ of an inch thick, and then glue on the top of this _two_ narrower strips, about as thick as the bodies of the insects for which the board is intended, leaving a s.p.a.ce of the required size between them, as shown in fig. 60. In this way you get a groove of square section, that is in some respects preferable to the round one cut out by means of the rat-tail file.
[Ill.u.s.tration: FIG. 61.--SECTIONS OF SETTING BOARDS.]
Now comes a question about which there is a difference in the tastes or fancies of entomologists. Shall the boards be perfectly flat on the top, or shall the sides slope from the groove, or shall the surface be rounded? A glance at the three sections of setting boards will show clearly what is meant. The rounded board is most commonly used, and the graceful curve thus given to a b.u.t.terfly or moth set on such is certainly attractive; but it is not natural. The wings of these insects are rigid, and are never seen bent into such curves in a living specimen. For this reason I much prefer a perfectly plane surface on each side of the groove. Then, as to whether there shall be a slope or not, this is a matter of less importance. A very decided sloping of the wings is certainly not so convenient for future examination; nor does it, to my mind, look nearly so well as both sides in the same plane, or at a very gentle inclination. But perhaps this subject had better be left to the taste of the reader, remembering, however, that, whatever plan be adopted, all the boards should be alike in this respect, so that there may be a degree of uniformity in the cabinet.
The surface of the cork must, in all cases, be nicely smoothed down with gla.s.s paper, and then covered with thin white paper, fixed to its surface with ordinary paste.
When insects are on the boards, they should be placed in an airy spot, as free as possible from dust, while they are drying. Hence the advisability of some form of "drying house." This is simply a box, standing on end, and provided with a hinged door consisting of a sheet of perforated zinc in a wooden frame. The boards may slide in this on little slips of wood nailed or glued on to the sides, or the wooden bases of the boards may project beyond the cork at the ends, and slide into grooves in the side of the house.
[Ill.u.s.tration: FIG. 62.--A b.u.t.tERFLY ON THE SETTING BOARD.]
Beyond these requirements nothing is wanted save a good stock of pins, thin card or ordinary writing paper, and a "setting needle." The last-named item is simply a needle mounted in a handle, and a good one may be made by thrusting the head of a darning needle into a piece of twig. The pins used for setting--that is, for fixing the pieces of paper or card to keep the parts in position--may be of the ordinary kind; but entomological pins are far preferable, even for this purpose; for, being much thinner, they do not damage and disfigure the setting boards so much.
Now as to the setting. First see that the pin with which you are to fix your dead insect pa.s.ses centrally through the thorax. Then fix it firmly on the setting board, its body lying neatly in the groove of the cork.
Cut out some little pointed strips of card or paper, and, after bringing the wings into position with the setting needle, fix each one by a pinned strip. In spreading out the wings, care must be taken not to pierce them at all, but simply to push them into their place by pressing the needle at their bases, or by putting the needle beneath and _lifting_ them out.
Instead of pointed pieces of card, uniform strips of paper may be used, as shown in fig. 63, each strip pa.s.sing over both wings.
After the four wings have been properly arranged, a few extra pins may be used to keep other parts in position. Thus, the antennae may be placed at equal angles, the proboscis may be extended, and a couple of pins may be used to support the abdomen if it is inclined to bend downward.
[Ill.u.s.tration: FIG. 63.--ANOTHER METHOD OF SETTING b.u.t.tERFLIES AND MOTHS.]
As before mentioned, insects should be set soon after they are dead, while the parts are still soft and supple. But where this cannot be done, and the specimens have become stiff, brittle, and rigid, they must be "relaxed" before any attempt is made at setting them out.
This process of relaxing consists in placing the specimens in a very moist atmosphere for a few days. There are several simple ways of doing this, many of which will readily suggest themselves to the reader. Your collecting box, if a zinc one, may also be used as a relaxer. Pin your stiff insects in it, after well moistening the cork, and simply shut them up for a day or two. Any metal box will serve the same purpose providing you put into it a piece of sheet cork on which to fix the insects, and this cork may rest on a bed of moist sand.
Another plan is to float the pinned specimens on corks in a shallow vessel of water, and cover them over with a bell gla.s.s.
Insects that are being relaxed should be examined from time to time, and the degree of flexibility acquired tested by a gentle pressure of the setting needle or by blowing on them. If not sufficiently supple, give another day in the damp cell, but never allow them to be forgotten till they are covered with mildew.
The time occupied in thoroughly drying b.u.t.terflies and moths will vary considerably according to their sizes and the condition of the atmosphere. In hot and dry summer weather four or five days will prove quite sufficient for the _very_ small and thin-bodied species. From one to two weeks, however, may be looked upon as the average period; but the large and thick-bodied moths may require more than this.
Perhaps the best test of their condition is the gentle pressing of the setting needle against the abdomen--the last part of the body to become dry and stiff. If the abdomen seems quite firm and rigid, you are pretty safe in removing the specimen from the board; but if it bends at all under a slight pressure of the needle let it remain for a day or two longer.
If your cabinet is quite ready for the reception of new-comers, the insects may be put in their proper places immediately after their removal from the setting boards; but if not, they may be pinned temporarily in a "store box" till the time comes when you have proper accommodation provided. The full consideration of these matters will be dealt with in another chapter.
It is possible that the setting of some of your specimens will not exactly please you. If such is the case, put them in a relaxing box for a day or two, and then reset them more to your fancy.
We have now to deal with a matter that applies more particularly to moths, especially the very large and thick-bodied species. The abdomens of these become more or less contracted and shrivelled on drying, sometimes to such an extent as to look most unsightly.
There is a remedy for this, and the time and patience required in working it out will be well repaid by the superior results obtained.
While the abdomen is still in a soft condition, make a slit throughout its length with a very sharp knife or a sharp-pointed pair of scissors.
This slit should be made down the centre of the under surface, or, if the insect is to be placed in the cabinet with the under side exposed, down the middle line of the back. Then remove all the contents of the abdomen, sc.r.a.ping them out with a piece of hooked wire, or removing them with a fine pair of forceps, and leaving the skin as clean as possible both within and without. Now introduce a packing of cotton wool, just sufficient in quant.i.ty to maintain the natural form of the body as the specimen dries.
There is another good method of stuffing moths that possesses a decided advantage over the one just described, since it leaves the specimen in such a perfect condition that it shows no appearance of having been stuffed when viewed from either side. This consists in snipping off the abdomen at the waist, clearing out the contents with a hooked wire, lightly stuffing it with cotton wool pushed in at the waist, and then setting it aside to dry, while the other part of the insect is undergoing the same process on the setting board. When both parts of the moth are thoroughly dry, the stuffed abdomen is easily fixed in its place with a little coaguline; and this, if neatly done, will not show the slightest sign of the treatment to which the insect has been submitted.
Even after your insects are finally housed in the cabinet, they are subject to two other dangers, both of which are more destructive to moths than to b.u.t.terflies. One is technically known as "grease," and the other is the invasion of certain museum pests that feed on the specimens, causing them to fall to pieces.
Examine the moths that have been for a time in the cabinet, and some are sure to exhibit an oily or greasy appearance, the hairs of the abdomen, and perhaps also of the thorax, being clogged together just as if the specimen had been dipped in oil, the same miserable condition perhaps being shared also by parts of the wings.
This is due to the gradual oozing out of the fatty matter that is always present to a greater or less extent in the bodies of the insects, and which must necessarily show itself more sparingly in specimens that have been carefully stuffed.
The old saying, "Prevention is better than cure," applies well in the present case; but as there are times when a knowledge of the "cure" is the only means of saving a valuable specimen from destruction, we will study both.
To deal with the two in the order of the well-worn proverb, we will consider the prevention first. Always carefully clean out and stuff the abdomens of large-bodied insects; and as a rule, treat them with some substance that will either absorb or dissolve out all oily matter. I think the best plan is to remove the abdomen, clean it out if its size permits of such an operation, and then, after labelling it to prevent its future application to the wrong body, either let it remain in a bottle of magnesia for several weeks, or soak it in benzole or ether for a few hours or longer.
If magnesia has been employed as an absorbent, you have simply to blow or lightly brush off the loose powder that clings to the body, and then fix it in its place with coaguline. A body dipped in ether or benzole will look as if completely spoilt at first, for the furry coat that clothes it will lie matted and almost entirely robbed of its beautiful colours, reminding one forcibly of the proverbial "drowned rat." But take no notice of this change. Let the body have at least a few hours in the liquid, extending the time to a day or two in the case of very large ones and those which experience has proved to be particularly liable to "grease;" and, immediately on withdrawing it, fix it with a pin in a good strong draught, such as you may obtain by opening a window about an inch, or, if a breezy day, in the open air.
These liquids are so volatile (and for that reason should never be left exposed in an open vessel) that they rapidly evaporate, leaving the dry hair to be loosened by the breeze, thus bringing back the natural appearance almost perfectly.
It is probable that many of the smaller insects that were not considered to require the stuffing or grease-removing operations will sooner or later exhibit a greasy tendency in the cabinet. At first the abdomen is affected, and the oily matter then gradually creeps over the rest of the body, finally spreading over the wings, and giving the insect a most deplorable aspect. But these are not irreparably lost, and the following cure will often bring them back to their former beauty.
If the abdomen only shows signs of grease, cut it off and soak it in one of the above-named liquids for a day or so, replacing it as above after the drying operation. If, however, the oily matter has spread to the thorax and the bases of the wings, the whole specimen must be soaked, using a basin or jar of suitable size, covered with a plate of gla.s.s. A good draught during the drying operation will do much to prevent the hair from sticking in matted tufts close against the surface of the body and wings, and a gentle brushing with a very soft camel-hair brush will loosen and reset the fur.
The other danger to which we have referred is the invasion of certain "mites" and other museum pests that pay periodical visits to our cabinet drawers and store boxes, often committing such havoc as to severely try the patience of an interested naturalist.