[Ill.u.s.tration: Newhouse No. 15 Trap]
Spread of Jaws, 11 3/4 inches. To meet the views of certain hunters whose judgment is respected, the manufacturers designed a style of jaw for the No. 5 trap, making an offset of 3/4 of an inch, so as to allow the springs to come up higher when the bear"s leg is in the trap. This gives the spring a better grip. Those wishing this style should specify "No. 15."
[Ill.u.s.tration: Newhouse No. 6 Trap]
Spread of Jaws, 16 inches. Weight, complete, 42 pounds. This is the strongest trap made. We have never heard of anything getting out of it when once caught. It is used to catch lions and tigers, as well as the great Grizzly Bears of the Rocky Mountains.
[Ill.u.s.tration: Bear Chain Clevis and Bolt]
This cut ill.u.s.trates Bear Chain Clevis and Bolt, intended as a subst.i.tute for the ring on the end of the trap chain, when desired.
With this clevis a loop can be made around any small log or tree without the trouble of cutting to fit the ring. The chain is made five feet long, suitable for any clog, and the prices of bear traps fitted with it are the same as with the regular short chain and ring.
[Ill.u.s.tration: Steel Trap Setting Clamp]
Every trapper knows how difficult it is to set a large trap alone in the woods, especially in cold weather, when the fingers are stiff, and the difficulty is greatly increased when one has to work in a boat. One of these clamps applied to each spring will by a few turns of the thumb-screws, bend the springs to their places, so that the pan may be adjusted without difficulty. No. 4 Clamp can be used on any trap smaller than No. 4 1 /2. No. 5 and 6 are strong clamps, carefully made and especially adapted to setting the large traps Nos.
4 1/2 to 6. They dispense with the inconvenient and dangerous use of levers. With them one can easily set these powerful traps. These clamps are also useful about camp for other purposes.