Africa has a profusion of horned game mostly of the antelope family and of late years many of these horns find their way to the walls in this country.
They are mounted as directed for the deer with the exception that many of them are improved by polishing the tips or even nearly the entire length of the horns. As most of them are corrugated or twisted in great variety this calls for considerable preliminary work with half round and round rasps and files before sandpaper, gla.s.s and polishing powders give a finish. If the tips and the higher surfaces of the balance are completely polished, the rest smoothed down somewhat and the entire horns rubbed with a little oil the effect will be good.
[Ill.u.s.tration: A Good Shield Pattern]
[Ill.u.s.tration: Back of block]
Shields are made in various patterns, woods and sizes, the average pair of deer antlers requiring one 7/8 inch thick and about 810 or 1012 inches. Oak in a dull oil finish always looks well, though walnut, cherry, ash and birch are much used. If near a woodworking shop provided with a jigsaw and moulder they will turn them out in any pattern you may wish. The Ogee moulded edge is to be preferred.
If you have to make it yourself, a simple diamond, square or oval panel with rounded or beveled edge will be sufficiently difficult.
Arrange the antlers in place on the shield and mark lightly around the base, remove them and drill three holes for screws. Countersink for the heads on the back of the shield and so fasten the antlers in place. For light horns a bra.s.s screw-eye at the top of shield is used to hang them, but heavy moose and elk antlers require an iron plate in back of shield, let in flush across the top of a perpendicular groove to catch a hook or head of a heavy nail in the wall.
[Ill.u.s.tration: DEER ANTLERS; ELK FEET; BISON HORNS.]
If the antlers are to be used as a rack for hats, guns or rods, two screw-eyes or plates will be necessary to prevent turning.
There are other methods of mounting horns and antlers, but I have found the above to be the most substantial and neat, and not very difficult.
CHAPTER XIX.
MOUNTING FEET AND HOOFS.
Many sportsmen now preserve the feet of their large game to have them made up in various articles of use and ornament which they can distribute among their friends or use in their own homes. Some of these articles are gun and rod racks, furniture legs and feet, ink wells, match, cigar and ash holders, thermometers, paper weights, umbrella and cane handles.
[Ill.u.s.tration: WOODEN CROOK FOR DEER FOOT.]
It goes without saying that for such things as racks, furniture legs, handles and thermometer mounts the leg skin attached to the hoof should be left six or more inches in length while for ink wells, etc., it may be shorter.
[Ill.u.s.tration: SKINNED DEER FOOT.]
[Ill.u.s.tration: DEER FOOT INK WELL.]
In fairly cool weather the feet and lower legs of deer will keep for some days without skinning as they contain but a small amount of flesh.
Still it is safest and but the work of a few minutes to split them up the backs, skin down to the toe joints and cut them off there. Dry them with or without salting and they are easily packed up to carry home or send to the taxidermist. If one foot and shank is received in the flesh it will aid in mounting them up as racks, furniture legs, etc., as for such purposes the skin is mounted over a piece of wood of the size and shape of the skinned leg. For preparing feet for racks and handles it is well to supply yourself with a number of natural crooks of about the size of a deer"s leg and nearly of a right angle. Sa.s.safras, gum or some soft wood work up easiest. When skinned place in pickle or give foot coating of a.r.s.enic and alum--pickle is best. Be sure and leave enough skin attached to hoof; a little experience will teach you this. Now remove foot from bath, rinse well and sew up same as far as the claws; next bore a hole through the claws from inside of claws, where it will not show. Get two wire nails and nail these claws to a board, as shown in A. Now arrange the hoofs as shown in ill.u.s.tration and put a screw into each from underneath, to hold them down (B), or you can nail a cleat across them by nailing to the block on each side of hoof; the idea is to get these parts firmly placed in position. Now finish sewing up the skin and stuff it full of chopped excelsior, shaping the foot as you proceed. Now drive a long nail against back side of foot to keep it from sagging (C). Allow the foot to thoroughly dry.
[Ill.u.s.tration: DEER FOOT THERMOMETER.]
When dry remove excelsior and cut off surplus skin around top and the foot is ready for an ink well, match safe, ash tray or paper weight, as they all go on the same way. Mix up some plaster of paris in water and run the foot full and place the ink well or other fitting in place and allow the plaster to "set" and the foot is finished. If you wish a pen rest you can now place it in position. In setting up thermometers remove bone to hoof and whittle out a stick shape of bones removed. Coat inside of skin with a.r.s.enic and alum and place stick in position and sew up skin. Put on metal cap at top and tack on thermometer. For hooks on racks, work up a stick with crook into the approximate size and shape of the deer"s leg with the foot bent at right angles. It had best be a little small so it can have a coating of clay or other modelling material to make the skin fit it perfectly. Sew up as for thermometer.
When dry fasten to the rack by inserting in a square or oval hole and wedging at the back.
For furniture legs the feet are turned out in natural position on wooden legs, and fastened by bolting or s.c.r.e.w.i.n.g to small tables, stools, or screens. As handles for canes and umbrellas, treat the same as for hooks and leave the wood long to form a dowel which is glued or inserted in cane or umbrella, a metal band covering the end of the skin. I have referred in this chapter to deer feet, but those of elk, caribou and moose are also used and suitable fittings in nickel and silver plate are supplied in various sizes by dealers.
[Ill.u.s.tration: DEER FOOT HAT RACK.]
If you wish the hoofs mottled (they look best that way) file same until you get to the "quick," which is light in color and gives the foot a very attractive appearance. Smooth down with sandpaper or edge of gla.s.s.
Oil a rag and dip it in powdered pumice stone and rub hoof vigorously a few moments, and you will have a beautiful polish.
The smaller articles are complete as they are or may be mounted, ink wells, etc., on round, and thermometers on long panels of variously finished woods. Many nice articles may thus be made from what is usually considered worthless offal.
[Ill.u.s.tration: MOOSE FOOT JEWEL CASE.]
CHAPTER XX.
MOUNTING FISH.
These with reptiles are most difficult to preserve with any success by the ordinary methods. There are some individuals which it is impossible for the taxidermist to prepare the skins of, so as to retain a natural appearance for any length of time. They can only be represented by casts painted to the best of the artist"s ability.
Most of the varieties of medium and large game fishes can be mounted by the average taxidermist and it is with these we are mostly concerned.
There are almost as many methods of mounting fish as there are operators, each having some pet kink of real or fancied superiority.
As often as otherwise fish are mounted in the medallion style, with one side only showing. This is especially adapted to display on walls and panels. For filling material everything from sawdust to plaster has been employed but as good results as any are secured by a hard core of the approximate size of the skinned fish, coated with some plastic substances which is moulded into shape through the skin.
In skinning some fish the scales must be protected by pasting thin paper over them but ordinarily it is sufficient to keep the skin wet and not allow it to dry out until it is complete. A piece of oil cloth is good to work on in skinning fish or birds either. Some taxidermists have a large pane of gla.s.s set flush in a table top for this purpose.
[Ill.u.s.tration: FISH BEDDED IN SAND WITH PLASTER MOULD OF UPPER HALF.]
With a freshly caught fish at hand which is to be made into a medallion the process is about as follows: Before skinning lay it flat on one side on a piece of soft wood board of the proper thickness and mark out its outline. Though only one side of the mounted fish shows, a little more than precisely one half is preserved in order to include the tail, the vertical and dorsal fins and also to give an appearance of rotundity.
Leaving this margin all around, the skin is cut away from the side which, on account of damage or other reason, is selected for the back.
The head must be cut through with chisel or a fine saw. Severing the bones at the base of the fins with the scissors the whole body is removed by cutting the spinal column at its junction with the skull.
In skinning fish you will note a white layer, like tin foil, which gives the fish its silvery color. Do not disturb this if possible. Remove all surplus flesh, cut away the gills and interior of head and if at all greasy (what fish is not) treat to a bath in gasoline. Use absorbent, sawdust or meal to remove oily gasoline, drop in alcohol or formaldehyde solution while the body is prepared. To do this cut out the board by the outline on it with a short bevel on the back and the other side the full shape of the fish. The whole form is slightly diminished, however, to allow for a coating of clay. This is applied after the skin has been removed from the solution and poisoned.
When a good fit is secured the skin is fastened in place by sewing from top to bottom, across the back board, or if large, nailing the edges to the board. The fins which have been kept wet are to be spread; each clamped with two pieces of pasteboard. On very large fish spring clothes pins may be used to clamp the fins, for small ones pins forced through both thicknesses, _outside_ the fins.
Sponge the fish off carefully to remove all clay or other dirt and give it a coat of rather thin white varnish. This prevents the scales curling up and to some extent fixes or restores the colors of the fish.
The eye is set after the fish is dry and if it does not fill the socket, model around it with wax or paper pulp. Fish eyes vary so greatly that to strictly copy nature you had better use the uncolored fish eyes, painting the back with suitable oil colors with a coat or two of sh.e.l.lac over it to prevent the clay in which it is set from affecting the paint.
The final painting of a mounted fish which is necessary to complete the best work is a task for an artist. If a specimen in the flesh (living if possible) is at hand this is made easier. All fish skins collected should be accompanied by color sketches if possible.
All silvery fish should be coated with size and nickel leaf over their entire scaly surface. On this ground paint with thin oil colors. If the paint is not too thick the desired silvery sheen will show through. If the whole fish is dark no leaf is needed and in some cases the upper part of the body requires a gold ground with the nickel leaf on the silvery under parts. j.a.panese gold paint or something similar will do for a golden ground.
The finished medallion may lie flat in a case, be fastened on the face of a panel, or hung by a loop at the mouth or center of back. Panels of natural wood are a favorite mount and framed panels covered with plush or the imitation pebbled upholstery leather.
Another method of mounting medallions is to take a plaster mold of the display half of the fish and from it make a plaster cast like the back board. This is sandpapered down to allow for the skin and gouged out at the bases of the fins and tail. The head too is not reproduced on the cast.
[Ill.u.s.tration: MEDALLION FISH, PAPER BACKING, BOARD BACK, EXCELSIOR BETWEEN.]
When the skin is ready to apply, coat this plaster cast with some nonporous modelling material. A mixture of thin liquid glue and whiting is good for this. Some paper pulp is put inside the head and at the junction of body and fins. Shape from the outside with the fingers.