O1 Barrow Gear Driving Pulley, 6 in. dia., 2-1/8 in. face.
P Barrow Gear Driven Pulley, 9 in. dia., 1-1/2 in. face.
P1 Barrow Spur Gear, usually 26 Teeth, also 24 and 28 Teeth.
Q Doffer Lever Intermediate Gear, 104 Teeth.
Q1 Doffer Change Gear, 17 to 40 Teeth.
R 1st Lap Roll Intermediate Gear, 40 Teeth.
S 2nd Lap Roll Intermediate Gear, 40 Teeth.
T Lap Roll Gear, 48 Teeth.
T1 Lap Roll, 6 in. dia.
U Double Band Intermediate Pulley for Comb 9-3/8 in. dia.
U1 Double Band Intermediate Pulley for Comb 6 in. dia.
V Comb Box Pulley 3-3/8 in. dia.
V1 Comb Box Pulley 4-1/8 in. dia.
W Doffer Comb.
{74}
[Ill.u.s.tration]
REVOLVING FLAT CARD.
DIAGRAM OF CARD COILER GEARING
F2 Coil Driving Gear; 24 Teeth for 10-in.
Coiler, 25 Teeth for 12-in. Coiler.
F3 Top Calender Driving Gear, 23 Teeth.
G Coiler Change Gear, 16 Teeth.
G1 Coiler Driving Bevel Gear, 20 Teeth.
H Coiler Middle Upright Bevel Gear, 20 Teeth.
H1 Coiler Top Upright Bevel Gear, 20 Teeth.
H2 Tube Gear Driving Gear, 25 Teeth.
H3 Upright Shaft Can Bottom Driving Gear. 15 Teeth.
H4 Coiler Double Intermediate Gears, 44 Teeth.
H5 Coiler Double Intermediate Gears, 15 Teeth.
I Coiler Calender Bevel Gear, 20 Teeth.
I1 1st Coiler Calender Spur Gear, 20 Teeth.
I2 1st Coiler Calender, 2 in. dia.
K Coiler Double Intermediate Gears, 44 Teeth.
K1 Coiler Double Intermediate Gears, 15 Teeth.
L Tube Gear, 75 Teeth for 10-in. Coiler, 98 Teeth for 12-in. Coiler.
L1 Can Bottom Intermediate Gear; 17 Teeth for 10-in. Coiler; 22 Teeth for 12-in. Coiler.
L2 Can Bottom Gear, 84 Teeth.
M Top Calender Gear, 34 Teeth.
M1 Top Calender, 4-1/4 in. dia.
{75}
REVOLVING FLAT CARDS.
DRAFT CALCULATIONS.
[Ill.u.s.tration]
{76}
[Ill.u.s.tration]
{77}
REVOLVING FLAT CARD.
DOFFER CHANGE GEAR TABLE.
[Ill.u.s.tration]
NOTE
Licker-in Driving Pulley, 19 in. dia.
Licker-in Driven Pulley, 7 in. dia.
Barrow Gear Driving Pulley. 6 in. dia.
Barrow Gear Driven Pulley, 9 in. dia.
Doffer Lever Intermediate Gear, 104 Teeth.
Doffer Gear, 180 Teeth.
{78}
REVOLVING FLAT CARD.
PRODUCTION PER DAY OF TEN HOURS.
[Ill.u.s.tration]
NOTE--5 per cent. has been deducted in the above table for cleaning, stripping. etc.
{79}
REVOLVING FLAT CARD.
DRAFT TABLE.
[Ill.u.s.tration]
NOTE--The draft is figured between the 6 in. dia. Lap Roll and 2 in.
dia. Coiler Calender Rolls.
DECIMAL EQUIVALENTS.
[Ill.u.s.tration]
{80}