LIFTING RODS specially finished to avoid sticking, and easily removed and cleaned without necessity of readjustment.
RE-LEVELLING easily taken care of by means of adjustable foot casting and jack screw on each Spring Piece.
ADJUSTABLE THREAD BOARD LIFTERS.
RING OILING BEARING ON OUTRIGGER.
SELF-LUBRICATING LOOSE PULLEY ON SLEEVE.
IMPROVED FORM OF CYLINDER HEAD.
PHOSPHOR BRONZE CYLINDER BEARINGS of self-oiling type.
GEARING, simple and enclosed in boxed end to prevent accident. All cut gears.
BUILDER of simple and effective design adjustable for Filling, Warp, Conant, Reverse Conant, or Straight Wind.
CREELS with rigid end and center supports, free from vibration.
[Ill.u.s.tration]
OUT BEARING BOX (CUT OPEN) SHOWING RING OILER AND SLEEVE FOR LOOSE PULLEY
{192}
[Ill.u.s.tration]
WET TWISTER, WITH DRIVING PULLEYS AT FOOT END
{193}
FLOOR s.p.a.cE OF TWISTERS.
[Ill.u.s.tration]
WIDTHS OF MACHINES.
2-1/2-in. and 2-3/4-in. Gauge = 3 ft. 1-1/8 in. over all 3-in. and 3-1/4-in. Gauge = 3 ft. 1-5/8 in. over all 3-1/2-in. and 4-in. Gauge = 3 ft. 2-5/8 in. over all 4-1/2-in. Gauge = 3 ft. 3-3/4 in. over all 5-in. Gauge = 3 ft. 4-1/4 in. over all 5-in. Gauge = 3 ft. 5 in. over all
To ascertain the length of Twisters with any number of spindles: Multiply one-half the number of spindles by the gauge and add 2 ft. 1 in. for head and off ends.
Although it is advantageous when possible to keep to the numbers of spindles given in the table on page 195, other lengths can be built if necessary. Even rolls and boxes are preferable.
DRIVING PULLEYS are 8 in. to 18 in. dia., 3-1/4-in. face.
{194}
[Ill.u.s.tration]
WIDE GAUGE TWISTER WITH DOUBLE LINE BOTTOM AND SINGLE LINE TOP ROLLS
{195}
LENGTHS OVER ALL OF TWISTERS.
[Ill.u.s.tration]
{196}
TABLE SHOWING GAUGES, RINGS AND SPINDLE SPEEDS FOR VARIOUS NUMBERS AND PLYS.
THIS TABLE FORMS A KEY TO THE PRODUCTION TABLES WHICH FOLLOW
[Ill.u.s.tration]
{197}
TABLE SHOWING GAUGES, RINGS AND SPINDLE SPEEDS--CONT"D.
[Ill.u.s.tration]
{198}
TABLE SHOWING NUMBER OF POUNDS TWISTED YARN PRODUCED IN 10 HOURS-2 PLY
[Ill.u.s.tration]
{199}
TABLE SHOWING NUMBER OF POUNDS TWISTED YARN PRODUCED IN 10 HOURS-3 PLY.
[Ill.u.s.tration]
Allowance has been made for doffing, waste, cleaning, etc.
{200}
TABLE SHOWING NUMBER OF POUNDS TWISTED YARN PRODUCED IN 10 HOURS-4 PLY.
[Ill.u.s.tration]
Allowance has been made for doffing, waste, cleaning, etc.
{201}
TABLE SHOWING NUMBER OF POUNDS TWISTED YARN PRODUCED IN 10 HOURS-5 PLY.
[Ill.u.s.tration]
Allowance has been made for doffing, waste, cleaning, etc.
{202}