SPEEDS--170 to 210 R. P. M.
{231}
FLOOR s.p.a.cE--Dimensions of Standard machines with Short Headstock (8 ft. 6 in.) and 6-Beam Creel, 23-1/2 in. or 27 in. centers, the latter for Beam Heads up to 26 in. dia. ; 9/8 wide, for Warper Beams 54 in.
wide between Heads, Drying Surface of Cylinders, 56-1/2 in.
6 ft. dia. Cylinder 31 ft. 0 in. x 8 ft. 6 in.
(Width is 8 ft. 11 in. over extreme projections in Headstock when Cannon Shaft is extended.) 7 ft. dia. Cylinder 33 ft. 4 in. x 8 ft. 6 in.
66 in. and 40 in. dia. Cylinders 33 ft. 4 in. x 8 ft. 6 in.
6 ft. and 4 ft. dia. Cylinders 33 ft. 10 in. x 8 ft. 6 in.
7 ft. and 4 ft. dia. Cylinders 34 ft. 10 in. x 8 ft. 6 in.
7 ft. and 5 ft. dia. Cylinders 37 ft. 10 in. x 8 ft. 6 in.
Add for each additional two Beams in Creel, 3 ft. 4-1/2 in.
Add for Medium Headstock 1 ft. 10 in.
Add for Long Headstock 3 ft. 8 in.
LOOM BEAMS--Slashers 9/8 wide, as described above, will take Loom Beams up to 64 in. long over all, or up to 70 in. by using Cranked Cannon Shaft Brackets.
WIDER SLASHERS--These are made up to 12/4 wide, for widths of yarn as follows: 9/8 6/4 7/4 8/4 9/4 10/4 11/4 12/4 54 in. 60 in. 66 in. 72 in. 78 in. 84 in. 90 in. 96 in.
Add to the width of machines, as given above, 6 in. for each extra width over 9/8.
SPECIAL MACHINES--Are made with Extra Wide or Extra Long Heads and many other attachments for Special Work, also with AIR DRYING instead of Cylinders.