I may specially name one of his arrangements which I was quick to take up and appreciate. I carried it out with great advantage in my after life. It was, to record subjects of conversation by means of "graphic"
memoranda. Almost daily, persons of note came to consult with him about machinery. On these occasions the consultations took place either with reference to proposed new work, or as to the progress of orders then in hand. Occasionally some novel scheme of applying power was under discussion, or some new method of employing mechanism: On ordinary occasions rough and rapid sketches are made on any stray pieces of waste paper that were about, and after the conversation is over the papers are swept away into the waste basket and destroyed.
And yet some of these rapid drawings involve matters of great interest and importance for after consultations.
To avoid such losses, Mr. Field had always placed upon his table a "talking book" or "graphic diary." When his visitors called and entered into conversation with him about mechanical matters, he made rapid sketches on the successive pages of the book, and entered the brief particulars and date of the conversation, together with the name and address of the visitor. So that a conversation, once begun, might again be referred to, and, when the visitor called, the graphic memoranda might be recalled without loss of time, and the consultation again proceeded. The pages of Mr. Field"s "talking books" were in many ways most interesting. They contained data that, in future years, supplied valuable evidence in respect to first suggestions of mechanical contrivances, and which sometimes were developed into very important results. I may add that Mr. Field kept these "talking books"
on a shelf in front of his drawing table. The back of each volume was marked with the year to which the entries referred, and an index was appended to each. A general index book was also placed at the end of the goodly range of these graphic records of his professional life.
The completion of the working drawings of the Lambeth pumping engines occupied me until August 1831. I had then arrived at my twenty-third year. I had no intention of proceeding further as an a.s.sistant or a journeyman. I intended to begin business for my self. Of course I could only begin in a very small way. I informed Mr. Field of my intention, and he was gratified with my decision. Not only so; but he kindly permitted me to obtain castings of one of the best turning-lathes in the workshops. I knew th at when I had fitted it up it would become the parent of a vast progeny of descendants--not only in the direct line, but in planing machines, screw-cutting lathes, and many other minor tools.
At the end of the month, after taking a grateful farewell of Mr. Field and his partners, I set sail for Leith with my stock of castings, and reached Edinburgh in due time. In order to proceed with the construction of my machine tools, I rented a small piece of land at Old Broughton. It was at the rear of my worthy friend George Dougla.s.s"s small foundry, and was only about five minutes" walk from my father"s house. I erected a temporary workshop 24 feet long by 16 feet wide.
I removed thither my father"s foot-lathe, to which I had previously added an excellent slide-rest of my own making. I also added a "slow motion," which enabled me to turn cast-iron and cast-steel portions of my great Maudslay lathe. I soon had the latter complete and in action. Its first child was a planing machine capable of executing surfaces in the most perfect style--of 3 feet long by 1 foot 8 inches wide. Armed with these two most important and generally useful tools, and by some special additions, such as boring machines and drilling machines, I soon had a progeny of legitimate descendants crowded about my little workshop, so that I often did not know which way to turn.
[Image] My temporary workshop at Edinburgh
I had one labourer to drive the wheel which gave motion to my big lathe; but I was very much in want of some one else to help me.
One day a young hearty fellow called upon me. He had come from the Shotts Iron Company"s Works in Edinburgh. Having heard of what I was about, he offered his services. When he told me that he had been bred as a millwright, and that he could handle the plane and the saw as well as the chisel and the file, I closed with him at once. He was to have fifteen shillings a week. I liked the young man very much--he was so hearty and cheerful. His name was Archibald Torry, or " Archie," as he was generally called during the twenty years that he remained in my service I obtained another a.s.sistant in the person of a young man whose father wished him to get an insight into practical engineering. I was offered a premium of #50 for twelve months" experience in my workshop.
I arranged to take the young man, and to initiate him in the general principles and practice of engineering. The #50 premium was a very useful help to me, especially as I had engaged the millwright.
It enabled me to pay Torry"s wages during the time that he remained with me in Edinburgh. I found it necessary, however, to take in some work in the regular way of business, in order to supply me with the means of completing my proper supply of tools.
The chief of these extraneous and, I may say, disturbing jobs, was that of constructing a rotary steam-engine. Mr. Robert Steen had contrived and patented an engine of this sort. He was a dangerously enthusiastic man, and entertained the most visionary ideas as to steam power.
He was of opinion that his own contrivance was more compact and simple, and possessed of more capability of producing power from the consumption of a given quant.i.ty of fuel, than the best steam-engines then in use. I warned him of his error; but nothing but an actual proof would satisfy him. He urgently requested me to execute his order.He made me a liberal and tempting offer of weekly payments for my work during the progress of his engine. He only required that I should give his invention the benefit of my careful workmanship.
He considered that this would be sufficient to substantiate all his enthusiastic expectations. I was thus seduced to accept his order.
I made the requisite drawings, and proceeded with the work. At the same time my own machine tools were in progress, though at a r.e.t.a.r.ded pace. The weekly payments we"re regularly made, and I was kept in a sort of financial ease. After three months the rotary engine was finished to the inventor"s complete satisfaction. But when the power it gave out was compared with that of a good ordinary steam-engine, the verdict as to consumption of fuel was against the new rotary engine. Nevertheless, the enthusiastic projector, "tho" vanquished he would argue still," insisted that the merits of his contrivance would sooner or later cause it to be a most formidable rival to the crank steam-engines. As he was pleased with its performances, I had no reason to be dissatisfied. I had done my part in the matter, and Mr. Steen had done his. His punctual weekly payments had a.s.sisted me in the completion of my tools; and after a few months more labour I had everything ready for starting business on my own account.
My choice lay between Liverpool and Manchester. I had seen both of these cities while on my visit to Lancashire to witness the opening of the Liverpool and Manchester Railway. I now proceeded to visit them again. I was fortified with valuable introductions to leading men in both places. I was received by them with great kindness and hospitality. I have heard a great deal about the ingrat.i.tude and selfishness of the world. It may have been my good fortune, but I have never experienced either of those unfeeling conditions. On the whole I have found a great deal of unselfish kindness among my fellow-beings.
They have often turned out of their way to do me a service; and I can never be too grateful for the unwearied kindness, civility, and generosity of the friends I met with during my stay in Lancashire.
It was a question which would be the best place to settle in-- Liverpool or Manchester. I had seen striking evidences of the natural apt.i.tude of Lancashire workmen for every sort of mechanical employment, and had observed their unsparing energy while at work. I compared them with the workmen whom I had seen in London, and found them superior.
They were men of greater energy of character; their minds were more capacious; their ingenuity was more inventive. I felt a.s.sured that in either Liverpool or Manchester--the centres of commercial and manipulative energy--I could settle down with my limited capital and tools, and in course of time contrive to get on, helped by energy, self-reliance, and determination. I also found that the demand for machine-making tools was considerable, and that their production would soon become an important department of business. It might be carried on with little expenditure of capital, as the risks were small and the returns were quick. I resolved to cultivate that moderate and safe cla.s.s of mechanical business, at all events at the outset.
I first went to Liverpool. I presented my letter of introduction to Mr. Roscoe, head of the Mersey Steel and Iron Company. He received me with great kindness, and gave me much good advice. I called upon Edward Berry, engineer, and also upon William Fawcett, who had received me with so much kindness on my former visit. I cannot omit mentioning also the friendly reception which I received from Dr. Sillar.
He had been a medical student at Edinburgh, and had during that time met with some kindness from my father. He expressed his remembrance of it with grateful effusion; and added his personal introduction, with that of my letters, to some of the leading men in Liverpool. I may mention that Dr. Sillar was the son of Burns"s "Brother Poet" Davie, to whom the well-known "Epistle" was addressed.
Among the other well-known men to whom I was introduced at Liverpool was John Cragg, an intelligent and enterprising ironfounder. He was an extensive manufacturer of the large sugar-boiling pans used in the West Indies. He had also given his attention to the introduction of iron into buildings of different sorts. Being a man of artistic taste he had even introduced cast-iron into Gothic architecture. In order to exhibit, in an impressive form, the uses of his favourite metal, he erected at his own cost a very elegant church in the northern part of Liverpool.*
[footnote...
So far as I can recollect, the name of the church was St. James"s.
It exhibited a very early introduction of iron as an important element in architectural construction. Iron was afterwards largely introduced into mills, mill gearing, and buildings generally.
Cast-iron was introduced, not only in the material parts of the structure, but into the Gothic columns and Gothic tracery of the windows, as well as into the lofty and elegant spire. Iron was also employed in the external ornamental details, where delicate yet effective decoration was desirable. The famous architect, Edward Blore, was the designer of the church; and the whole details of the building--of which cast-iron formed the princ.i.p.al material-- were executed to his entire satisfaction*
[footnote...
So far as I can recollect, the name of the church was St. James"s.
It exhibited a very early introduction of iron as an important element in architectural construction. Iron was afterwards largely introduced into mills, mill gearing, and buildings generally.
My introduction to Mr. Cragg led to an acquaintance, and then to a friendship. When the ice was broken which was very soon--he told me that he was desirous of retiring from the more active part of his business. Whether he liked my looks or not I do not know; but, quite unexpectedly, he made me a very tempting offer to enter his works as his successor. He had already ama.s.sed a fortune, and I might do the same. I could only thank him most sincerely for his kindness.
But, on carefully thinking the matter over, I declined the proposal.
My princ.i.p.al reason was, that the special nature of his foundry work did not quite harmonise with my desire to follow the more strictly mechanical part of the iron business. Besides, I thought I had a brighter prospect of success before me; though I knew that I had many difficulties to contend against. Did I throw away my chances in declining the liberal proposal of Mr. Cragg? The reader will be able to judge from the following pages. But to the last*
[footnote...
Mr. Cragg died in 1853, aged 84.
I continued a most friendly intercourse with my intended patron, while he on his part took an almost paternal interest in my progress.
After my visit to Liverpool I pa.s.sed on to Manchester.
I was fortunate in having introductions to some of the leading men there,--to John Kennedy, William Fairbairn, the Grant Brothers, and lastly, to that most admirable man, Benjamin Hick, engineer, Bolton.
To narrate in detail all the instances of warm and hospitable kindnesses which I received from men in Lancashire, even from the outset of my career there, would fill a volume.
I first went to see my friend Edward Tootal, who had given me so kind a reception in 1830. I was again cordially received; he now promised to befriend me, which he did most effectually. I next visited John Chippendale, of the firm of Thomson, Chippendale, and Company, calico printers. I had met him at a friend"s house in London, where he had offered, if I ever visited Manchester, to introduce me to some of the best men there. I accordingly called upon him at his counting-house.
It happened to be Tuesday, the market day, when all the heads of manufacturing establishments in and round Manchester met together at the Exchange between 12 and 1; and thus all were brought to a focus in a very convenient manner.
Mr. Chippendale first introduced me to Mr. John Kennedy, one of the most distinguished men in Manchester. I had a special letter of introduction to him from Buchanan of Catrine, and his partner Smith of Deanstone. I explained to him the object of my visit to Manchester, and he cordially entered into my views. He left his occupation at the time, and went with me to see a place which he thought might be suitable for my workshop. The building was new at hand--in Dale Street, Piccadilly. It had been used as a cotton mill, but was abandoned by the owner in favour of more suitable and extensive premises. It was now let out in flats for manufacturing purposes.
Power was supplied to each flat from a shaft connected with a large mill up the street, the owner of which had power to spare. The flat shown to me was 130 feet long by 27 feet wide, and the rent was only #50 a year. I thought the premises very suitable, but I took a night to sleep over it. I thanked Mr. Kennedy very much for his kindness, and for the trouble which he had taken on behalf of an unknown stranger.
On this memorable day I had another introduction, through the kindness of Mr. Chippendale, which proved of great service to me. It was to the Messrs. Grant, the famous "Brothers Cheeryble" of d.i.c.kens. I was taken to their counting-house in Cannon Street, where I was introduced to Daniel Grant. Although business was at its full height, he gave me a cordial reception. But, to save time, he invited me to come after the Exchange was over and take "tiffin" with him at his hospitable mansion in Mosely Street.
There, he said, I should meet some of the most enterprising men in Lancashire. I was most happy, of course, to avail myself of his invitation. I went thither accordingly, and the first thing that Daniel did was to present me in the most cordial manner to "his n.o.ble brother William," as he always affectionately called him. William was the head of the firm, and he, too, gave me a warm and hearty welcome.
He asked me to sit beside him at the head of the table.
During dinner--for indeed it was such, being the survival of the old-fashioned one o"clock dinner of a departing age--William entered into conversation with me. He took occasion to inquire into the object of my visit to Manchester. I told him, as briefly as I could, that I intended to begin the business of a mechanical engineer on a very moderate scale, and that I had been looking out for premises wherein to commence operations. He seemed interested, and asked more questions. I related to him my little history, and told him of my desires, hopes, and aspirations. What was my age? "Twenty-six."
"That is a very young age at which to begin business on your own account"
"Yes; but I have plenty of work in me, and I am very economical."
Then he pressed his questions home. "But what is your capital?"
I told him that my capital in cash was #63. "What!" he said, "that will do very little for you when Sat.u.r.day nights come round."
"That"s true," I answered; "but as there will be only myself and Archy Torry to provide for, I think I can manage to get along very well until profitable work comes in."
He whispered to me, "Keep your heart up!" With such views, he said, I was sure to do well. And if, he added, on any Sat.u.r.day night I wanted money to pay wages or other expenses, I would find a credit for #500 at 3 per cent at his office in Cannon Street, "and no security."
These were his very words. What could have been more generous?
I could only whisper my earnest thanks for his warm-hearted kindness.
He gave me a kindly squeeze of the hand in return, which set me in a glow of gladness. He also gave me a sort of wink that I shall never forget--a most knowing wink. In looking at me he seemed to turn his eye round and brought his eyebrows down upon it in a sudden and extraordinary manner. I thought it was a mere confirmation of his kind advice to "keep my heart up!" It was not until two years after that I found, from a mutual friend, that the eye in question was made of gla.s.s! Sometimes the gla.s.s eye got slightly out of its place, and Mr. Grant had to force it in again by this odd contortion of his eyebrows, which I had translated into all manner of kind intentions.
As soon as the party broke up I went to Wren and Bennett, the agents for the flat of the old mill which I had seen in Dale Street.
I inspected it again, and found that it was in all respects suitable for my purpose. I may mention in pa.s.sing that the flat below mine was in the occupation of a gla.s.s-cutter, whose gla.s.s-cutting lathes and grindstones were supplied with power from the same upright shaft that was to serve me in the same manner on the flat above, Encouraged by the support of William Grant, I immediately entered into a contract for the premises as a yearly tenant. Nothing could have been more happily arranged for my entering into business as a mechanical engineer and machine tool maker. The situation of the premises was excellent, being in the heart of Manchester There was a powerful crab crane, or hoisting apparatus, in the upper story, and the main chains came down in front of the wide door of my workshop, so that heavy castings or cases of machinery might be lifted up or let down with the utmost case and convenience. At the same time I was relieved from looking after the moving power and its natural accompaniment of trouble and expense in the way of fuel and attendance.
[Image] My factory flat at Manchester
When I had settled the contract for taking the place, I wrote down to Edinburgh by that night"s post to tell my father of the happy results of my visit to Manchester, and also to inform my right hand man, Archy Torry, that I should soon be with him. He was to prepare for packing up my lathes, planing machines, drilling machines, and other smaller tools, not forgetting my father"s foot lathe, of which I had made such effective use.*
[footnote...
I have still this foot-lathe in full and perfect and almost daily action. I continue to work with it now, after sixty-three years of almost constant use. It is a lathe that I duly prize and venerate, not only because it was my father"s, but also because it was, in practical fact, the progenitor, more or less directly, of all the mechanical productions of my long and active life.
I soon followed up my letter. I was in Edinburgh in a few days" time, and had all my tools packed up. In the course of about ten days I returned to Manchester, and was followed by Archy Torry and the ponderous cases of machinery and engineer"s tools. They were all duly delivered, hoisted to my flat, and put in their proper places.
I was then ready for work.
The very first order I received was from my friend Edward Tootal.
It was a new metallic piston for the small steam-engine that gave motion to his silk-winding machinery. It was necessary that it should be done over night, in order that his factory should be at work as usual in the morning.
My faithful Archy and I set to work accordingly. We removed the old defective piston, and replaced it by a new and improved one, made according to my own ideas of how so important a part of a steam-engine should be constructed. We conveyed it to Mr. Tootal"s factory over night, and by five o"clock in the morning gave it a preliminary trial to see that everything was in order. The "hands" came in at six, and the machine was set to work. It was no doubt a very small order, but the piston was executed perfectly and satisfactorily. The result of its easier action, through reduced friction, was soon observable in the smaller consumption of coal. Mr. Tootal and his brother were highly pleased at my prompt and careful attention to their little order, and it was the forerunner of better things to come.
Orders soon came in. My planing machine was soon fully occupied.