Chapter 431: Incomplete World No. 1
The International Energy Organization sets the standard for measuring whether a country has the ability to manufacture nuclear weapons, and it depends on whether this country can produce high gas centrifuge.
Standing in front of this square, nearly three-story-high, with only silvery-white metallic color equipment, Ye Qing"s gaze had never left the centrifuge protection cover, two centrifugal platforms with a diameter of over two meters.
Even if we wouldn"t watch at its 50,000 turns and looking around in the world, there were few factories that could make the platform of this centrifuge of two meters in diameter; the surface height error was no more than nanometers. The surface roughness was one-third of that of mobile-phone gla.s.s on the market, and it also illuminated people than mirrors.
Inside the centrifugal platform, there was also an electric heating function that kept the surface temperature of the platform at 7 degrees to ensure the gla.s.s melts had a softening temperature. At 7 degrees, the metal platform did not produce thermal deformation. This was another thing, allowing metal materials to be used. Oh what a shame on the black technology of soil drilling.
With this centrifugal, the surface of the gla.s.s is not greater than that of the tin of the mirror. The gla.s.s produced by the machine is no different from ordinary gla.s.s to the naked eye, but the picture rendering effect will be clearly distinguished from ordinary cell phone gla.s.s.
To produce traditional float gla.s.s with density and granularity of the tin liquid relatively large, the surface roughness of the gla.s.s floating on the upper layer will not be higher than that of the tin liquid. With this centrifugal, the thickness of the gla.s.s is not greater than that of the tin of the mirror and the gla.s.s produced by the machine is no different from ordinary gla.s.s to the naked eye, but the picture rendering effect will be clearly distinguished from ordinary cell phone gla.s.s.
Hearing Ye Qing"s order, Master Qiao turned on the preheating switch of the centrifuge. Metals expert, when the platform temperature reached seven hundred degrees, the gla.s.s melt in the crucible was slightly tight with special equipment and placed in the center of the centrifuge table. The protective cover was closed, and the rotating platform above it slowly lowers at the moment when it touched the molten gla.s.s, it stopped descending.
The upper platform would gently press the gla.s.s and rotate together to prevent the centrifugal force from throwing the gla.s.s away. At the same time, the platform would follow with an imperceptible degree while rotating. The gla.s.s that was thinned by the centrifugal force would descend synchronously so that the thickness of the gla.s.s would be controlled to 0.1 mm or thinner.
"Om~"
Ye Qing could not see the two centrifugal platforms rotating through the gla.s.s of the protective cover. He just felt fixed on the ground like there was a 500-kilometer high-speed train pa.s.sing by. The roar of the machinery violently roared, and the air was violently agitated. This feeling was both wonderful and shocking. The upper and lower rotating platforms seemed to be motionless. But its rotation was already twenty-five times that of an ordinary car when it was running.
Bugatti Veyron EB 16.4?!
If you use this platform as a car to run, with sparks and lightning all the way, fighter jets will be unable to catch up.
One minute later, the violently roaring centrifuge slowly stopped running. The top workbench raised and the protective cover opened automatically.
Ye Qing, who was covering his ears, hurried forward, and then something amazing happened. The molten gla.s.s on the bottom workbench had disappeared, and there was no gla.s.s on the workbench and it was brighter than the mirror. If it hadn"t been in a high-temperature state, Ye Qing would definitely touch it with his hands.
"There is gla.s.s on it." Master Qiao gave a successful smile: "Boss, that layer of gla.s.s is too transparent, you can"t see it."
After speaking, Master Qiao used a special tray that had already been made and gently inserted it into the centrifuge platform. At this time, Ye Qing could refract the light from the shaking of the gla.s.s and vaguely saw a thin gla.s.s-like layer.
"Without fragmentation, we succeeded." He couldn"t believe the experiment would be successful in one go.
Edison used electric bulbs to experiment with more than 2,000 methods. It took four years for the computer to transition from a tube to a transistor. The Monster Factory challenged the world"s thinnest mobile-phone gla.s.s, and it only took one week to prepare.
Waiting patiently for this thin mobile phone display gla.s.s to cool down, Ye Qing put on laboratory gloves and gently squeezed this piece, so that the gla.s.s at its edge could only be blurred by the naked eye. It had only the thickness of a banknote and had to be the kind of brand, new banknote that just came out of the banknote printing factory.
"With a two-meter diameter circle, he flashed a flashlight along the corner he held up so that this piece of gla.s.s display gla.s.s could reflect less clearly in the air.
"Beautiful and perfect."
Then he dropped the bright flashlight and measured the thickness with an electronic caliper.
"Just right 0.1 mm."
It was produced according to the black technology drawings; the thickness of the final dream display is only 0.1 mm.
If other materials were used instead of gla.s.s, it could be made thinner, even thinner than silk, and could be rolled up at will. He did not use backlight means to make the display transparent. Of course, this did not have a commercial use-value. The screen with extremely poor hardness could easily draw nails" marks. And after two days of playing, the display would be damaged.
If you can produce flexible gla.s.s, you can use the same technology and different material formulations to produce flexible substrates attached to organic diodes.
"Cut into 5.5 inches and test the performance of the gla.s.s." Ye Qing gently put down the thin piece of gla.s.s with the most gentle movement, a little excited: "Organic diode coatings should also be produced quickly. We will not study ma.s.s production. The method is to produce a dream display as soon as possible...Then tomorrow..."
The Master Craftsman took the tray and went to the non-standard product workshop on the ground, and Ye Qing had followed him along to the non-standard product workshop. Qiao had placed the tray on the rare-quality laser cutting machine and set the power and cutting size.
The incandescent laser line thinner than silk had traversed this thin gla.s.s, and it was cut into nine standard gla.s.s in less than ten seconds. The rest was reserved for future use. While the Master Craftsman was testing the gla.s.s, an Electronic Messenger also began disa.s.sembling a cell phone.
It was a group of Master Craftsmen who ran to open a cell phone repair shop to make all the compet.i.tors lose their jobs. With a carving knife and a heating air gun, they could dismantle a mobile phone faster than a bear kid dismantles building blocks.
Using rubber tweezers, the master craftsman gently had picked up a 5.5-inch thin gla.s.s, placed it on the compression tester, and tested it at the same time with a piece of ordinary display gla.s.s just removed from the mobile phone.
The two gla.s.ses have been positioned, and the pressure table slowly had applied pressure to the two gla.s.ses at the same time.
At 0.2 MPa. Both pieces of gla.s.s were bent.
At 0.5 MPa. The bending amplitude of the thin gla.s.s was obviously larger than that of the ordinary mobile phone display gla.s.s.
When it was added to 0.8 megapascals, without warning, the thin gla.s.s cracked into snowflakes with a "click~."
Ye Qing"s heart instantly cooled, because the gla.s.s of the ordinary mobile phone next to him was intact.
The test continued, and when it reached 2.5 MPa, the ordinary cell phone gla.s.s cracked. Test results showed its compressive strength was three times that of the world"s first thinnest display gla.s.s that has just been released.
Although the display gla.s.s was only the inner screen, there was a layer of outer screen gla.s.s for protection. But when the data was three times worse, it was difficult to ensure the internal screen would not be damaged when the mobile phone is accidentally dropped.
A mobile phone whose internal screen shatters quickly is simply an inferior product.
After the tensile test, the strength of ordinary mobile phone display gla.s.s was twice that of thin gla.s.s.
In the bending resistance test, the thin gla.s.s was more than twice as good as ordinary gla.s.s.
After the Electronic Messenger replaced an Apple 7p"s display gla.s.s with this kind of thin gla.s.s, Ye Qing had picked up the 7p and threw it to the ground. After the bang, he picked up the screen and found that the inner screen was unbroken. He tried again from a two-meter high position with the screen facing down. After the heart-wrenching impact, the internal and external screens of this phone were all broken.
"Unqualified." Ye Qing rubbed his face. As expected, the number one in the world is not so easy to get, especially when manufacturing non-metal products that are not very good.
"Boss, we can use vapor deposition on both sides of the gla.s.s to plate a nano-level diamond coating to increase the strength of the gla.s.s."
The Master Metal Expert who had made flexible gla.s.s materials with high-purity quartz himself stepped forward and said with confidence: "Diamond itself is transparent, and the coating does not affect the light transmittance of the gla.s.s."
"Just doing this, the cost will be much higher. The diamond is a diamond. Thin gla.s.s is transformed into nano-diamond coated gla.s.s, so the cost is more than doubled?
"The cost of this kind of gla.s.s is not high. Ma.s.s production will flatten the cost. Moreover, ours is a tall diamond-coated gla.s.s, which is more expensive of course." Ye Qing became happy and asked Qiao to dismantle another mobile phone.
He forgot he was in a bad mood just now. Now he wants to look at ordinary mobile-phone displays. After changing the thin gla.s.s, would the color of the picture be improved?