Chapter 185
Lilianne of the Anguish
Recently, I am always thinking about the same thing, whether I’m awake or asleep .
And that is my beloved Kuti… actually not, it’s the sorcery we are currently developing .
It’s a sorcery based on Magicprint Search that acquires a large amount of information by Information a.n.a.lysis which then processes the information and produces an image .
Magicprint Search is very vulnerable to physical obstacles, so when the probing wave of Magicprint Search comes in contact with a physical object, it disappears .
The sorcery’s development began with the reversal idea of observing physical obstacles from the disappearing waves .
We are doing various trial and error, such as trying to cover for the vulnerability by generating waves of Magicprint Search at speeds that can’t be done by ordinary people, or increasing the density by dividing the occurrence points of the waves in layers .
And most importantly, succeeding in obtaining extraordinary amounts of information via the special sorcery that is the Information a.n.a.lysis .
However, there is also the problem of obtaining too much information, so every day is devoted to making a filter that matches the situation for the purpose of examining the correct information .
When the information is extracted through the current filter we have, the roughness of the video output on the Kutipad is very noticeable .
This is because the processing power of the Kutipad is insufficient to reproduce the information extracted through the filter as a video .
The improvement of the Kutipad’s processing power has been the center of a lot of our discussions, but it has not progressed as much as we thought it would .
It is a difficult challenge to overcome, but we can’t give up .
And the biggest problem that is currently standing in our way——
(Test number 3782 . Operation start . )
A sorcery based on the Magicprint Search has been activated in the center of the field where many layers of sorceries were applied for testing .
At the same time of activation, the data from Information a.n.a.lysis is sent through a sorcery circuit to the filter and converted to an image .
The image was still rough, but it was much more beautiful than it was when the test numbers were in three digits .
“The 4th and 7th layers acquire the rear side of the object precisely . ”
“But, isn’t the 14th layer displaying the doll’s hair nonsensical?”
(The details are no good because of the roughness, huh… but, it’s a big improvement since it can be visualized this beautifully . )
One of the great advantages of this sorcery is that even I, who can only see magical power with my eyes is able to see physical objects, but it can also give me information on obstacles that are out of sight .
Switching the filter changes the transparency of the objects, so I can even see through the obstacles .
Far from that, it’s possible to switch viewpoints and even see the image from a different angle .
Well, everything that doesn’t have magical power is still hazy, so that’s frustrating .
One of the current challenges is that due to the lack of processing power of the Kutipad, the fine details still remain rough and do not hold an image .
“Alright, stage one is over . Let’s move onto stage two . ”
(Understood . Stage two, standby . )
“Standby . All green . Activate . ”
With the signal of Captain Kuti, the sorcery on the testing field started activating .
In a blink of an eye, a cloud filled with magical power appeared over the test field and it started raining .
This rain is special rain for testing with magical power .
Although I say that, it’s only like that to make it visible for me, so it’s no different from an ordinary rain otherwise .
By the way, the ground of the test field is properly enhanced with sorcery, so that it may get wet .