72. Another most important object to which a meter might be applied, would be to register the quant.i.ty of water pa.s.sing into the boilers of steam-engines. Without this, our knowledge of the quant.i.ty evaporated by different boilers, and with fireplaces of different constructions, as well as our estimation of the duty of steam-engines, must evidently be imperfect.
73. Another purpose to which machinery for registering operations is applied with much advantage is the determination of the average effect of natural or artificial agents. The mean height of the barometer, for example, is ascertained by noting its height at a certain number of intervals during the twenty-four hours. The more these intervals are contracted, the more correctly will the mean be ascertained; but the true mean ought to be influenced by each momentary change which has occurred. Clocks have been proposed and made with this object, by which a sheet of paper is moved, slowly and uniformly, before a pencil fixed to a float upon the surface of the mercury in the cup of the barometer. Sir David Brewster proposed, several years ago to suspend a barometer, and swing it as a pendulum. The variations in the atmosphere would thus alter the centre of oscillation, and the comparison of such an instrument with a good clock, would enable us to ascertain the mean alt.i.tude of the barometer during any interval of the observer"s absence.(3*)
An instrument for measuring and registering the quant.i.ty of rain, was invented by Mr John Taylor, and described by him in the Philosophical Magazine. It consists of an apparatus in which a vessel that receives the rain falling into the reservoir tilts over as soon as it is full, and then presents another similar vessel to be filled, which in like manner, when full, tilts the former one back again. The number of times these vessels are emptied is registered by a train of wheels; and thus, without the presence of the observer, the quant.i.ty of rain falling during a whole year may be measured and recorded.
Instruments might also be contrived to determine the average force of traction of horses--of the wind--of a stream or of any irregular and fluctuating effort of animal or other natural force.
74. Clocks and watches may be considered as instruments for registering the number of vibrations performed by a pendulum or a balance. The mechanism by which these numbers are counted is technically called a scapement. It is not easy to describe: but the various contrivances which have been adopted for this purpose, are amongst the most interesting and most ingenious to which mechanical science has given birth. Working models, on an enlarged scale, are almost necessary to make their action understood by the unlearned reader; and, unfortunately, these are not often to be met with. A very fine collection of such models exists amongst the collection of instruments at the University of Prague.
Instruments of this kind have been made to extend their action over considerable periods of time, and to register not merely the hour of the day, but the days of the week, of the month, of the year, and also to indicate the occurrence of several astronomical phenomena.
Repeating clocks and watches may be considered as instruments for registering time, which communicate their information only when the owner requires it, by pulling a string, or by some similar application.
An apparatus has recently been applied to watches, by which the hand which indicates seconds leaves a small dot of ink on the dial-plate whenever a certain stop or detent is pushed in. Thus, whilst the eye is attentively fixed on the phenomenon to be observed, the finger registers on the face of the watch-dial the commencement and the end of its appearance.
75. Several instruments have been contrived for awakening the attention of the observer at times previously fixed upon. The various kinds of alarums connected with clocks and watches are of this kind. In some instances it is desirable to be able to set them so as to give notice at many successive and distant points of time, such as those of the arrival of given stars on the meridian. A clock of this kind is used at the Royal Observatory at Greenwich.
76. An earthquake is a phenomenon of such frequent occurrence, and so interesting, both from its fearful devastations as well as from its connection with geological theories, that it becomes important to possess an instrument which shall, if possible, indicate the direction of the shock, as well as its intensity.
An observation made a few years since at Odessa, after an earthquake which happened during the night, suggests a simple instrument by which the direction of the shock may be determined.
A gla.s.s vase, partly filled with water, stood on the table of a room in a house at Odessa; and, from the coldness of the gla.s.s, the inner part of the vessel above the water was coated with dew.
Several very perceptible shocks of an earthquake happened between three and four o"clock in the morning; and when the observer got up, he remarked that the dew was brushed off at two opposite sides of the gla.s.s by a wave which the earthquake had caused in the water. The line joining the two highest points of this wave was, of course, that in which the shock travelled. This circ.u.mstance, which was accidentally noticed by an engineer at Odessa,(4*) suggests the plan of keeping, in countries subject to earthquakes, gla.s.s vessels partly filled with treacle, or some unctuous fluid, so that when any lateral motion is communicated to them from the earth, the adhesion of the liquid to the gla.s.s shall enable the observer, after some interval of time, to determine the direction of the shock.
In order to obtain some measure of the vertical oscillation of the earth, a weight might be attached to a spiral spring, or a pendulum might be sustained in a horizontal position, and a sliding index be moved by either of them, so that the extreme deviations should be indicated by it. This, however, would not give even the comparative measure accurately, because a difference in the velocity of the rising or falling of the earth"s surface would affect the instrument.
NOTES:
1. Transactions of the Society of Arts, 1819, p. 116.
2. The contrivance is due to Mr Hencky, of High Holborn, in whose establishment it is in constant use.
3. About seven or eight years since, without being aware of Sir David Brewster"s proposal. I adapted a barometer, as a pendulum, to the works of a common eight day clock: it remained in my library for several months, but I have mislaid the observations which were made.
4. Memoires de l"Academie des Sciences de Petersburgh, 6e serie, tom. i. p. 4.
Chapter 9
Economy of the Materials Employed
77. The precision with which all operations by machinery are executed, and the exact similarity of the articles thus made, produce a degree of economy in the consumption of the raw material which is, in some cases, of great importance. The earliest mode of cutting the trunk of a tree into planks, was by the use of the hatchet or the adze. It might, perhaps, be first split into three or four portions, and then each portion was reduced to a uniform surface by those instruments. With such means the quant.i.ty of plank produced would probably not equal the quant.i.ty of the raw material wasted by the process: and, if the planks were thin, would certainly fall far short of it. An improved tool, completely reverses the case: in converting a tree into thick planks, the saw causes a waste of a very small fractional part; and even in reducing it to planks of only an inch in thickness, does not waste more than an eighth part of the raw material. When the thickness of the plank is still further reduced, as is the case in cutting wood for veneering, the quant.i.ty of material destroyed again begins to bear a considerable proportion to that which is used; and hence circular saws, having a very thin blade, have been employed for such purposes. In order to economize still further the more valuable woods, Mr Brunel contrived a machine which, by a system of blades, cut off the veneer in a continuous shaving, thus rendering the whole of the piece of timber available.
78. The rapid improvements which have taken place in the printing press during the last twenty years, afford another instance of saving in the materials consumed, which has been well ascertained by measurement, and is interesting from its connection with literature. In the old method of inking type, by large hemispherical b.a.l.l.s stuffed and covered with leather, the printer, after taking a small portion of ink from the ink-block, was continually rolling the b.a.l.l.s in various directions against each other, in order that a thin layer of ink might be uniformly spread over their surface. This he again transferred to the type by a kind of rolling action. In such a process, even admitting considerable skill in the operator, it could not fail to happen that a large quant.i.ty of ink should get near the edges of the b.a.l.l.s, which, not being transferred to the type, became hard and useless, and was taken off in the form of a thick black crust.
Another inconvenience also arose--the quant.i.ty of ink spread on the block not being regulated by measure, and the number and direction of the transits of the inking-b.a.l.l.s over each other depending on the will of the operator, and being consequently irregular, it was impossible to place on the type a uniform layer of ink, of the quant.i.ty exactly sufficient for the impression.
The introduction of cylindrical rollers of an elastic substance, formed by the mixture of glue and treacle, superseded the inking-b.a.l.l.s, and produced considerable saving in the consumption of ink: but the most perfect economy was only to be produced by mechanism. When printing-presses, moved by the power of steam, were introduced, the action of these rollers was found to be well adapted to their performance; and a reservoir of ink was formed, from which a roller regularly abstracted a small quant.i.ty at each impression. From three to five other rollers spread this portion uniformly over a slab (by most ingenious contrivances varied in almost each kind of press), and another travelling roller, having fed itself on the slab, pa.s.sed and repa.s.sed over the type just before it gave the impression to the paper.
In order to shew that this plan of inking puts the proper quant.i.ty of ink upon the type, we must prove, first--that the quant.i.ty is not too little: this would soon have been discovered from the complaints of the public and the booksellers; and, secondly that it is not too great. This latter point was satisfactorily established by an experiment. A few hours after one side of a sheet of paper has been printed upon, the ink is sufficiently dry to allow it to receive the impression upon the other; and, as considerable pressure is made use of, the tympan on which the side first printed is laid, is guarded from soiling it by a sheet of paper called the set-off sheet. This paper receives, in succession, every sheet of the work to be printed, acquiring from them more or less of the ink, according to their dryness, or the quant.i.ty upon them. It was necessary in the former process, after about one hundred impressions, to change this set-off sheet, which then became too much soiled for further use. In the new method of printing by machinery, no such sheet is used, but a blanket is employed as its subst.i.tute; this does not require changing above once in five thousand impressions, and instances have occurred of its remaining sufficiently clean for twenty thousand. Here, then, is a proof that the quant.i.ty of superfluous ink put upon the paper in machine-printing is so small, that, if multiplied by five thousand, and in some instances even by twenty thousand, it is only sufficient to render useless a single piece of clean cloth.(1*) The following were the results of an accurate experiment upon the effect of the process just described, made at one of the largest printing establishments in the metropolis.(2*) Two hundred reams of paper were printed off, the old method of inking with b.a.l.l.s being employed; two hundred reams of the same paper, and for the same book, were then printed off in the presses which inked their own type. The consumption of ink by the machine was to that by the b.a.l.l.s as four to nine, or rather less than one-half.
NOTES:
1. In the very best kind of printing, it is necessary, in the old method, to change the set-off sheet once in twelve times. In printing the same kind of work by machinery, the blanket is changed once in 2000.
2. This experiment was made at the establishment of Mr Clowes, in Stamford Street.
Chapter 10
Of the Ident.i.ty of the Work When It is of the Same Kind, and its Accuracy when of Different Kinds
79. Nothing is more remarkable, and yet less unexpected, than the perfect ident.i.ty of things manufactured by the same tool. If the top of a circular box is to be made to fit over the lower part, it may be done in the lathe by gradually advancing the tool of the sliding-rest; the proper degree of tightness between the box and its lid being found by trial. After this adjustment, if a thousand boxes are made, no additional care is required; the tool is always carried up to the stop, and each box will be equally adapted to every lid. The same ident.i.ty pervades all the arts of printing; the impressions from the same block, or the same copperplate, have a similarity which no labour could produce by hand. The minutest traces are transferred to all the impressions, and no omission can arise from the inattention or unskilfulness of the operator. The steel punch, with which the cardwadding for a fowling-piece is cut, if it once perform its office with accuracy, constantly reproduces the same exact circle.
80. The accuracy with which machinery executes its work is, perhaps, one of its most important advantages: it may, however, be contended, that a considerable portion of this advantage may be resolved into saving of time; for it generally happens, that any improvement in tools increases the quant.i.ty of work done in a given time. Without tools, that is, by the mere efforts of the human hand, there are, undoubtedly, mult.i.tudes of things which it would be impossible to make. Add to the human hand the rudest cutting instrument, and its powers are enlarged: the fabrication of many things then becomes easy, and that of others possible with great labour. Add the saw to the knife or the hatchet, and other works become possible, and a new course of difficult operations is brought into view, whilst many of the former are rendered easy. This observation is applicable even to the most perfect tools or machines. It would be possible for a very skilful workman, with files and polishing substances, to form a cylinder out of a piece of steel; but the time which this would require would be so considerable, and the number of failures would probably be so great, that for all practical purposes such a mode of producing a steel cylinder might be said to be impossible. The same process by the aid of the lathe and the sliding-rest is the everyday employment of hundreds of workmen.
81. Of all the operations of mechanical art, that of turning is the most perfect. If two surfaces are worked against each other, whatever may have been their figure at the commencement, there exists a tendency in them both to become portions of spheres. Either of them may become convex, and the other concave, with various degrees of curvature. A plane surface is the line of separation between convexity and concavity, and is most difficult to hit; it is more easy to make a good circle than to produce a straight line. A similar difficulty takes place in figuring specula for telescopes; the parabola is the surface which separates the hyperbolic from the elliptic figure, and is the most difficult to form. If a spindle, not cylindrical at its end, be pressed into a hole not circular, and kept constantly turning, there is a tendency in these two bodies so situated to become conical, or to have circular sections. If a triangular-pointed piece of iron be worked round in a circular hole the edges will gradually wear, and it will become conical. These facts, if they do not explain, at least ill.u.s.trate the principles on which the excellence of work formed in the lathe depends.
Chapter 11
Of Copying
82. The two last-mentioned sources of excellence in the work produced by machinery depend on a principle which pervades a very large portion of all manufactures, and is one upon which the cheapness of the articles produced seems greatly to depend. The principle alluded to is that of copying, taken in its most extensive sense. Almost unlimited pains are, in some instances, bestowed on the original, from which a series of copies is to be produced; and the larger the number of these copies, the more care and pains can the manufacturer afford to lavish upon the original. It may thus happen, that the instrument or tool actually producing the work, shall cost five or even ten thousand times the price of each individual specimen of its power.
As the system of copying is of so much importance, and of such extensive use in the arts, it will be convenient to cla.s.sify a considerable number of those processes in which it is employed.
The following enumeration however is not offered as a complete list; and the explanations are restricted to the shortest possible detail which is consistent with a due regard to making the subject intelligible.
Operations of copying are effected under the following circ.u.mstances:
by printing from cavities by stamping by printing from surface by punching by casting with elongation by moulding with altered dimensions
Of printing from cavities
83. The art of printing, in all its numerous departments, is essentially an art of copying. Under its two great divisions, printing from hollow lines, as in copperplate, and printing from surface, as in block printing, are comprised numerous arts.
84. Copperplate printing. In this instance, the copies are made by transferring to paper, by means of pressure, a thick ink, from the hollows and lines cut in the copper. An artist will sometimes exhaust the labour of one or two years upon engraving a plate, which will not, in some cases furnish above five hundred copies in a state of perfection.
85. Engravings on steel. This art is like that of engraving on copper, except that the number of copies is far less limited.
A bank-note engraved as a copperplate, will not give above three thousand impressions without a sensible deterioration. Two impressions of a bank-note engraved on steel were examined by one of our most eminent artists,(1*) who found it difficult to p.r.o.nounce with any confidence, which was the earliest impression.
One of these was a proof from amongst the first thousand, the other was taken after between seventy and eighty thousand had been printed off.
86. Music printing. Music is usually printed from pewter plates, on which the characters have been impressed by steel punches. The metal being much softer than copper, is liable to scratches, which detain a small portion of the ink. This is the reason of the dirty appearance of printed music. A new process has recently been invented by Mr Cowper, by which this inconvenience will be avoided. The improved method, which give sharpness to the characters, is still an art of copying; but it is effected by surface printing, nearly in the same manner as calico-printing from blocks, to be described hereafter, 96. The method of printing music from pewter plates, although by far the most frequently made use of, is not the only one employed, for music is occasionally printed from stone. Sometimes also it is printed with moveable type; and occasionally the musical characters are printed on the paper, and the lines printed afterwards. Specimens of both these latter modes of music-printing may be seen in the splendid collection of impressions from the types of the press of Bodoni at Parma: but notwithstanding the great care bestowed on the execution of that work, the perpetual interruption of continuity in the lines, arising from the use of moveable types, when the characters and lines are printed at the same time, is apparent.
87. Calico printing from cylinders. Many of the patterns on printed calicos are copies by printing from copper cylinders about four or five inches in diameter, on which the desired pattern has been previously engraved. One portion of the cylinders is exposed to the ink, whilst an elastic sc.r.a.per of very thin steel, by being pressed forcibly against another part, removes all superfluous ink from the surface previously to its reaching the cloth. A piece of calico twenty-eight yards in length rolls through this press, and is printed in four or five minutes.
88. Printing from perforated sheets of metal, or stencilling.