Shop Management

Chapter 6

Before leaving this portion of the subject the writer wishes to call attention to the a.n.a.logy which functional foremanship bears to the management of a large, up-to-date school. In such a school the children are each day successively taken in hand by one teacher after another who is trained in his particular specialty, and they are in many cases disciplined by a man particularly trained in this function. The old style, one teacher to a cla.s.s plan is entirely out of date.

The writer has found that better results are attained by placing the planning department in one office, situated, of course, as close to the center of the shop or shops as practicable, rather than by locating its members in different places according to their duties. This department performs more or less the functions of a clearing house. In doing their various duties, its members must exchange information frequently, and since they send their orders to and receive their returns from the men in the shop, princ.i.p.ally in writing, simplicity calls for the use, when possible, of a single piece of paper for each job for conveying the instructions of the different members of the planning room to the men and another similar paper for receiving the returns from the men to the department. Writing out these orders and acting promptly on receipt of the returns and recording same requires the members of the department to be close together. The large machine shop of the Bethlehem Steel Company was more than a quarter of a mile long, and this was successfully run from a single planning room situated close to it. The manager, superintendent, and their a.s.sistants should, of course, have their offices adjacent to the planning room and, if practicable, the drafting room should be near at hand, thus bringing all of the planning and purely brain work of the establishment close together. The advantages of this concentration were found to be so great at Bethlehem that the general offices of the company, which were formerly located in the business part of the town, about a mile and a half away, were moved into the middle of the works adjacent to the planning room.

The shop, and indeed the whole works, should be managed, not by the manager, superintendent, or foreman, but by the planning department. The daily routine of running the entire works should be carried on by the various functional elements of this department, so that, in theory at least, the works could run smoothly even if the manager, superintendent and their a.s.sistants outside the planning room were all to be away for a month at a time.

The following are the leading functions of the planning department:

(a) The complete a.n.a.lysis of all orders for machines or work taken by the company.

(b) Time study for all work done by hand throughout the works, including that done in setting the work in machines, and all bench, vise work and transportation, etc.

(c) Time study for all operations done by the various machines.

(d) The balance of all materials, raw materials, stores and finished parts, and the balance of the work ahead for each cla.s.s of machines and workmen.

(e) The a.n.a.lysis of all inquiries for new work received in the sales department and promises for time of delivery.

(f) The cost of all items manufactured with complete expense a.n.a.lysis and complete monthly comparative cost and expense exhibits.

(g) The pay department.

(h) The mnemonic symbol system for identification of parts and for charges.

(i) Information bureau.

(j) Standards.

(k) Maintenance of system and plant, and use of the tickler.

(l) Messenger system and post office delivery.

(m) Employment bureau.

(n) Shop disciplinarian.

(o) A mutual accident insurance a.s.sociation.

(p) Rush order department.

(q) Improvement of system or plant.

These several functions may be described more in detail as follows:

(a) THE COMPLETE a.n.a.lYSIS OF ALL ORDERS FOR MACHINES OR WORK TAKEN BY THE COMPANY.

This a.n.a.lysis should indicate the designing and drafting required, the machines or parts to be purchased and all data needed by the purchasing agent, and as soon as the necessary drawings and information come from the drafting room the lists of patterns, castings and forgings to be made, together with all instructions for making them, including general and detail drawing, piece number, the mnemonic symbol belonging to each piece (as referred to under (h) below) a complete a.n.a.lysis of the successive operations to be done on each piece, and the exact route which each piece is to travel from place to place in the works.

(b) TIME STUDY FOR ALL WORK DONE BY HAND THROUGHOUT THE WORKS, INCLUDING THAT DONE IN SETTING THE WORK IN MACHINES, AND ALL BENCH AND VISE WORK, AND TRANSPORTATION, ETC.

This information for each particular operation should be obtained by summing up the various unit times of which it consists. To do this, of course, requires the men performing this function to keep continually posted as to the best methods and appliances to use, and also to frequently consult with and receive advice from the executive gang bosses who carry out this work in the shop, and from the man in the department of standards and maintenance of plant (j) beneath. The actual study of unit times, of course, forms the greater part of the work of this section of the planning room.

(c) TIME STUDY FOR ALL OPERATIONS DONE BY THE VARIOUS MACHINES.

This information is best obtained from slide rules, one of which is made for each machine tool or cla.s.s of machine tools throughout the works; one, for instance, for small lathes of the same type, one for planers of same type, etc. These slide rules show the best way to machine each piece and enable detailed directions to be given the workman as to how many cuts to take, where to start each cut, both for roughing out work and finishing it, the depth of the cut, the best feed and speed, and the exact time required to do each operation.

The information obtained through function (b), together with that obtained through (c) afford the basis for fixing the proper piece rate, differential rate or the bonus to be paid, according to the system employed.

(d) THE BALANCE OF ALL MATERIALS, RAW MATERIALS, STORES AND FINISHED PARTS, AND THE NUMBER OF DAYS" WORK AHEAD FOR EACH CLa.s.s OF MACHINES AND WORKMEN.

Returns showing all receipts, as well as the issue of all raw materials, stores, partly finished work, and completed parts and machines, repair parts, etc., daily pa.s.s through the balance clerk, and each item of which there have been issues or receipts, or which has been appropriated to the use of a machine about to be manufactured, is daily balanced.

Thus the balance clerk can see that the required stocks of materials are kept on hand by notifying at once the purchasing agent or other proper party when the amount on hand falls below the prescribed figure. The balance clerk should also keep a complete running balance of the hours of work ahead for each cla.s.s of machines and workmen, receiving for this purpose daily from (a), (b), and (c) above statements of the hours of new work entered, and from the inspectors and daily time cards a statement of the work as it is finished. He should keep the manager and sales department posted through daily or weekly condensed reports as to the number of days of work ahead for each department, and thus enable them to obviate either a congestion or scarcity of work.

(e) THE a.n.a.lYSIS OF ALL INQUIRIES FOR NEW WORK RECEIVED IN THE SALES DEPARTMENT AND PROMISES AS TO TIME OF DELIVERY. The man or men in the planning room who perform the duties indicated at (a) above should consult with (b) and (c) and obtain from them approximately the time required to do the work inquired for, and from (d) the days of work ahead for the various machines and departments, and inform the sales department as to the probable time required to do the work and the earliest date of delivery.

(f) THE COST OF ALL ITEMS MANUFACTURED, WITH COMPLETE EXPENSE a.n.a.lYSIS AND COMPLETE MONTHLY COMPARATIVE COST AND EXPENSE EXHIBITS.

The books of the company should be closed once a month and balanced as completely as they usually are at the end of the year, and the exact cost of each article of merchandise finished during the previous month should be entered on a comparative cost sheet. The expense exhibit should also be a comparative sheet. The cost account should be a completely balanced account, and not a memorandum account as it generally is. All the expenses of the establishment, direct and indirect, including the administration and sales expense, should be charged to the cost of the product which is to be sold.

(g) THE PAY DEPARTMENT.

The pay department should include not only a record of the time and wages and piece work earnings of each man, and his weekly or monthly payment, but the entire supervision of the arrival and departure of the men from the works and the various checks needed to insure against error or cheating. It is desirable that some one of the "exception systems" of time keeping should be used.

(h) THE MNEMONIC SYMBOL SYSTEM FOR IDENTIFICATION OF PARTS AND FOR CHARGES.

Some one of the mnemonic symbol systems should be used instead of numbering the parts or orders for identifying the various articles of manufacture, as well as the operations to be performed on each piece and the various expense charges of the establishment. This becomes a matter of great importance when written directions are sent from the planning room to the men, and the men make their returns in writing. The clerical work and chances for error are thereby greatly diminished.

(i) INFORMATION BUREAU.

The information bureau should include catalogues of drawings (providing the drafting room is close enough to the planning room) as well as all records and reports for the whole establishment. The art of properly indexing information is by no means a simple one, and as far as possible it should be centered in one man.

(j) STANDARDS.

The adoption and maintenance of standard tools, fixtures, and appliances down to the smallest item throughout the works and office, as well as the adoption of standard methods of doing all operations which are repeated, is a matter of importance, so that under similar conditions the same appliances and methods shall be used throughout the plant. This is an absolutely necessary preliminary to success in a.s.signing daily tasks which are fair and which can be carried out with certainty.

(k) MAINTENANCE OF SYSTEM AND PLANT, AND USE OF THE TICKLER.

One of the most important functions of the planning room is that of the maintenance of the entire system, and of standard methods and appliances throughout the establishment, including the planning room itself. An elaborate time table should be made out showing daily the time when and place where each report is due, which is necessary to carry on the work and to maintain the system. It should be the duty of the member of the planning room in charge of this function to find out at each time through the day when reports are due, whether they have been received, and if not, to keep bothering the man who is behind hand until he has done his duty. Almost all of the reports, etc., going in and out of the planning room can be made to pa.s.s through this man. As a mechanical aid to him in performing his function the tickler is invaluable. The best type of tickler is one which has a portfolio for each day in the year, large enough to insert all reminders and even quite large instruction cards and reports without folding. In maintaining methods and appliances, notices should be placed in the tickler in advance, to come out at proper intervals throughout the year for the inspection of each element of the system and the inspection and overhauling of all standards as well as the examination and repairs at stated intervals of parts of machines, boilers, engines, belts, etc., likely to wear out or give trouble, thus preventing breakdowns and delays. One tickler can be used for the entire works and is preferable to a number of individual ticklers. Each man can remind himself of his various small routine duties to be performed either daily or weekly, etc., and which might be otherwise overlooked, by sending small reminders, written on slips of paper, to be placed in the tickler and returned to him at the proper time. Both the tickler and a thoroughly systematized messenger service should be immediately adjacent to this man in the planning room, if not directly under his management.

The proper execution of this function of the planning room will relieve the superintendent of some of the most vexatious and time-consuming of his duties, and at the same time the work will be done more thoroughly and cheaper than if he does it himself. By the adoption of standards and the use of instruction cards for overhauling machinery, etc., and the use of a tickler as above described, the writer reduced the repair force of the Midvale Steel Works to one-third its size while he was in the position of master mechanic. There was no planning department, however, in the works at that time.

(l) MESSENGER SYSTEM AND POST OFFICE DELIVERY.

The messenger system should be thoroughly organized and records kept showing which of the boys are the most efficient. This should afford one of the best opportunities for selecting boys fit to be taught trades, as apprentices or otherwise. There should be a regular half hourly post office delivery system for collecting and distributing routine reports and records and messages in no especial hurry throughout the works.

(m) EMPLOYMENT BUREAU.

The selection of the men who are employed to fill vacancies or new positions should receive the most careful thought and attention and should be under the supervision of a competent man who will inquire into the experience and especial fitness and character of applicants and keep constantly revised lists of men suitable for the various positions in the shop. In this section of the planning room. an individual record of each of the men in the works can well be kept showing his punctuality, absence without excuse, violation of shop rules, spoiled work or damage to machines or tools, as well as his skill at various kinds of work; average earnings, and other good qualities for the use of this department as well as the shop disciplinarian.

© 2024 www.topnovel.cc