The coat is begun at the under-arm seam _a_. For a coat five inches long begin three inches from the end of the web to make the first turn. Sew from this turn to the starting end of the web _b_, fasten the sewing thread and cut it off. The second row is made eleven inches long, or long enough to go over the shoulder and down the back, _b_ to _c_.
Sew four rows in this way to form the front and part of the back; then four rows five inches long for the back; then four more rows eleven inches long for the other shoulder and front _d_ to _e_. Sew the fifth or last row up three inches for the other under-arm seam.
Join the under-arm seams, leaving an opening of two inches for sleeves if they are desired. If not, the armhole and neck can be finished off with some contrasting color.
[Ill.u.s.tration]
For the sleeves, measure the length of the doll"s arm and make the first row this length. Make each row a little longer than the preceding row until the top or shoulder part is reached, then gradually shorten each row until the desired width is obtained. The last row should be the same length as the first row. When sewing them in the coat, have the longest part come at the top of the shoulder. b.u.t.tons are made by braiding yarn and sewing it in the form of b.u.t.tons.
A cord for fastening is made by braiding, or twisting and folding the yarn. It is then sewed into loops or used as cord and ta.s.sel for tying.
[Ill.u.s.tration]
Bootees
Knit two yards of round web for each bootee.
Start two inches from the end of the web for the first turn. Sew into an elliptical form three and one-half inches long for the sole. Sew two more rows without widening for the sides of the foot; then sew two rows across the front for the toe; the third row bring all around the top to complete the foot.
The leg of the bootee is made by bringing the web directly upward three inches before making the first turn. Make each row three inches high and catch each row into the top of the foot while sewing. Put cord and ta.s.sel around where the leg and foot meet.
[Ill.u.s.tration]
Little Boy Blue
Make coat according to directions given for doll"s coat.
Measure the length of the doll"s leg for the length of the trousers. Use flat web and sew it into two rectangular pieces wide enough to make each leg a little full.
Join the inside seams part way and then join the open edge of the right front with the open edge of the left front. Do the same with the back edges. Put a draw-string around the top, or a piece of the web may be used for a waistband. Put in a draw-string around the bottom of each leg.
[Ill.u.s.tration]
Little Red Riding-Hood
The doll shown in ill.u.s.tration is ten and one-half inches tall. To make cape and hood in one piece sew two rows of flat web, six and one-half inches long, for the center of the back. These two rows will also give the desired fulness. The next five rows are made nineteen inches long, or long enough to reach over the head and down to form the two sides of the cape and hood. After these five rows are completed, sew five rows six inches long on each side of the front of the cape, to make it wide enough to meet across the chest.
Close the cape and the hood in the back. The part above the six and a half inch rows will form the hood. Draw in the top of these two short rows and sew to the base of the hood. Put in a draw-string around the top of the right side of the cape in front, carry it around the base of the hood, around the top of the cape on the left side and tie in front.
[Ill.u.s.tration]
Doll"s Skirt
This skirt is five inches long and made of flat web. The first and last rows are made one and a quarter inch shorter than the other rows forming the skirt. These two rows are sewed together when the skirt is finished, thus forming the placket and also the desired fulness in the back.
There are sixteen rows in all. Each two, when sewed together, form a scollop at the top and bottom where the web is turned. In sewing care must be taken to have each row the exact length of the preceding row except in the first and last row.
The top of the skirt may be finished with a draw-string or a band made from cloth. The bottom of the skirt may be left as it is, or be finished with a blanket st.i.tch of some contrasting color. The skirt requires five yards of flat web.
[Ill.u.s.tration]
Little Boy"s Hat
Measure the child"s head for the size of the hat. Make the crown of the hat one-half of this measurement. If the child"s head measures twenty-two inches around, make the crown eleven inches in diameter. The crown is circular and is made in the same way as the circular mat, taking two st.i.tches of web and sewing them into one st.i.tch of the crown already sewed to keep it flat. When it is of the desired size, begin the side by sewing one st.i.tch of the web into one of the crown, at the same time holding the web to be sewed directly under the last row in the crown.
Make the side twice as long as the desired height of the hat. For instance, if the desired height is to be three and a half inches, make the side seven inches long, as one-half of this measurement is turned up.
Two colors may be used, one color for the crown and one for the side.
Red and black or red and white are pretty combinations.
A doll"s hat of the same style, the crown three and a half inches in diameter, requires five yards of round web.
[Ill.u.s.tration]
Child"s m.u.f.fler
This is a combination of flat and round web. Knit ten inches of flat web, change to round web by bringing the yarn across the center of the hole in the knitter to the opposite post, and knit ten inches, or the number of inches necessary to go around the neck. Change again to flat web, knit ten inches and clip off.
Make seven such pieces and sew them together to form the m.u.f.fler. The round web will form the neck part.
Do not remove from the knitter while changing from flat to round web.