While the Webbed and Double Jaw traps were little known prior to 1905, trappers have been quick to see the advantage derived from using them. The Double Jaw has taken even better than the Webbed Jaw.
The manufacturers had expected skunk trappers largely to be the buyers and this would include roughly speaking the section east of the Rocky Mountains, south of Manitoba and Quebec and north of the States bordering on the Gulf of Mexico. But the demand sprung up from all parts of America. This shows that trappers are finding these traps good ones for other animals than skunks and muskrats for which they were especially designed.
The fact that trappers found out about these traps so quickly is due largely to that up-to-date trappers" magazine--Hunter-Trader-Trapper, published at Columbus, Ohio, and which reaches trappers in all parts of America. The Oneida Community, Ltd., Oneida, N. Y., manufacturers of these traps were and are liberal users of advertising s.p.a.ce in the Hunter-Trader-Trapper to let trappers know of improvements in the trap line that are of value to them.
[Ill.u.s.tration: A MORNING CATCH OF SKUNK.]
If you have never tried any of the No. 81, which is the Webbed Jaw, or Nos. 91 or 91 1/2, the Double Jaw, we feel sure that you are not familiar with traps that will increase your catch. We believe that all trappers should have at least a few of these traps.
CHAPTER VIII.
VICTOR AND HAWLEY & NORTON TRAPS.
In the Victor is a good trap considering the cheap price at which it is sold and as the manufacturers say: "Is the most popular trap in the world."
While professional trappers use largely the Newhouse, yet in thickly settled sections and where trappers are constantly bothered by trap "lifters," the Victor is much used. While the trap is sold at a very low price, yet it is the best trap manufactured in the regular or long spring trap, with the exception of Newhouse, or H. & N.
The Victor is manufactured in six sizes and each is adapted to the following use: No. 0, rat or gopher; No. 1, muskrat; No. 1 1/2, mink; No. 2, fox; No. 3, otter; No. 4, beaver. The Nos. 0, 1 and 1 1/2 are single spring; Nos. 2, 3 and 4, double. The ill.u.s.tration showing No.
1 represents also Nos. 0 and 1 1/2 as they are different only in size. The ill.u.s.tration showing No. 4 represents Nos. 2 and 3 also as they are different only in size.
These traps are not so strong in any part as the Newhouse and trappers should bear this in mind when setting for the various animals.
[Ill.u.s.tration: NO. 1, VICTOR TRAP.]
The No. 1 1/2 known as the mink trap is also a splendid muskrat trap, having greater spread of jaws than the No. 1 and being heavier than the No. 1 is just right to catch and drown rats.
[Ill.u.s.tration: NO. 4, VICTOR TRAP.]
The Nos. 2, 3 and 4 are all double spring and made for fox, otter and beaver and while trappers catch large numbers of these animals in Victor traps, yet the more experienced ones prefer the Newhouse traps even at the advanced price.
The Victor is used largely for taking the smaller fur bearers. It is sold in large quant.i.ties in all parts of the United States and Canada.
The Hawley & Norton is made only in six sizes: Nos. 0, 1 and 1 1/2 single spring; Nos. 2, 3, and 4, double spring.
A lighter grade of stock is used in manufacturing these traps so that they can be made somewhat cheaper than the Newhouse and altho not as strong, they are a good reliable trap.
CHAPTER IX.
JUMP TRAPS.
While the Jump Trap has been in use in the Eastern part of the United States for upwards of fifty years, princ.i.p.ally in the New England and Sea Coast States, the use of these traps in all parts of the country did not become general until a few years ago.
The trap derives its name "Jump" from the fact that the spring is so arranged that when the trap is touched off or sprung by an animal or otherwise, it "Jumps", thus catching the animal high up on the leg.
Trappers that have not used these traps express doubts of their "Jumping" and catching high on the animal"s leg, but hundreds of letters received by the manufacturers from trappers and also published in the Hunter-Trader-Trapper prove that they do "Jump."
The manufacturers claim these points in their favor. They are somewhat lighter than the regular form of double spring traps and the trapper going far into the woods can carry a greater number; they set much flatter; can be set in smaller s.p.a.ce; springs are out of the way as no spring extends beyond the jaws; pans are large so that no animal can step between the jaws without springing the trap. The traps are set much the same as other steel traps.
The B. & L. trap is manufactured in six sizes, viz; Nos. 0, 1 and 2, single spring; Nos. 2 1/2, 3 and 4 double spring.
Some years ago the Oneida Community, Ltd., Oneida, N. Y., began manufacturing a "Jump" trap which is known as the "Oneida Jump". This trap has a new style of jaws. The old style was made of thin steel whereas these have full, wide-faced jaws, so that the chances of breaking the bone in the leg are lessened.
This trap has a chain attachment, fastening at the end of the jaw opposite the spring, so that when the animal is caught and struggles to get free the foot is only gripped the tighter. The trapper, however, can fasten the chain on the end of the crossbar, opposite dog, as there is a hole drilled there for that purpose.
[Ill.u.s.tration: NO. 1, ONEIDA JUMP.]
The "Oneida Jump" is manufactured in nine sizes. This ill.u.s.tration shows a No. 1. It is a single spring as are also No. 0 and 2; the other sizes have double springs.
[Ill.u.s.tration: NO. 4, ONEDIA JUMP.]
These sizes, No. 0 to No. 4, are adapted to catching the various animals with the exception of timber wolves and bears, altho the larger sizes are used for taking the coyote and small wolf.
The sizes adapted for the various animals are: No. 0, rat and gopher; No. 1, muskrat; No. 2, mink; No. 2 1/2, c.o.o.n or skunk; No. 12 1/2, same as 2 1/2, with teeth; No. 3, fox or otter; No. 13, same as No.
3, with teeth; No. 4, otter or wild cat; No. 14, same as No. 4, with teeth.
The No. 2 is a splendid mink trap from the fact that it takes little room and can be set in many places where the end spring cannot be placed to advantage. The No. 2 for mink and the No. 2 1/2 for c.o.o.n are much used at log sets as they lie so flat that but little cutting is required.
The No. 2 is also coming into use as a marten trap especially for log and notched tree sets.
The arrangement of the springs is such that the ends only extend about an inch beyond the jaws so that the double spring sizes even, do not take nearly as much room to set as the regular or end spring trap.
It makes no difference what kind of a set is to be made--water, land or snow, the fact that this make of trap takes but little room and lies very flat, should not be lost sight of. This sometimes is quite an advantage.
[Ill.u.s.tration: A JUMP TRAP TRAPPER.]
The most successful trappers are those who use some of the various styles of traps for there are certain sets where each can be used to the best advantage.
The "Jump Traps" are moderate priced and being light and strong for their size, trappers are taking to them, finding that for certain sets they have no equal. No trapper should start out for the season without some "Jumps."
CHAPTER X.
TREE TRAPS.
Experienced trappers fully appreciate the importance of having a trap that when the animal is caught, it is caught to stay, and instantly killed instead of being held a captive by the foot or leg.
Many fully realize the importance of a humane trap that will accomplish this, and have found many good points in the Tree Trap.
Most practical trappers know that one of the most successful ways to set steel traps for many kinds of animals, is to suspend the bait about two feet over the trap, compelling the animal to step on the pan of the trap in order to get at it. This may be very good, but in case of a heavy snow fall, a set of this kind means that your trap is snowed under, and you not only experience great difficulty in locating your trap, but often are unable to do so at all until spring, or when the snow disappears.
[Ill.u.s.tration: THE TREE TRAP.]
In order that readers may fully understand how the Tree Trap is used, two sketches are shown. One showing the trap set, with a mink approaching; the other one having caught Mr. c.o.o.n, and killed him instantly, not damaging the fur. This trap can be securely nailed to a tree, stump or stake, and should be at least two feet from the ground, though always in sight and easy to get to. In case of deep snow all you have to do is to bend the nails around, loosening the trap and renail it a few feet higher up.
How to Set.