Stone implements were made of flint, slate, or soapstone. Flint was worked with a squeezing tool, generally made of bone. Small pieces were thus split off until the stone acquired the desired form. Slate was first roughly formed and then finished with the drill and the whetstone.
The soft soapstone is now chiseled out with iron tools. If large blocks of soapstone cannot be obtained, fragments are cemented together by means of a mixture of seal"s blood, a kind of clay, and dog"s hair. This is applied to the joint, the vessel being heated over a lamp until the cement is dry. According to Lyon (p. 320) it is fancied that the hair of a b.i.t.c.h would spoil the composition and prevent it from sticking.
TRANSPORTATION BY BOATS AND SLEDGES.
THE BOAT (UMIAQ).
[Ill.u.s.tration: FIG. 478. Framework of Eskimo boat.]
[Ill.u.s.tration: FIG. 479. Kiglo or post.]
The main part of the frame of a boat is a timber which runs from stem to stern (Fig. 478). It is the most solid part and is made of driftwood, which is procured in Hudson Strait, Hudson Bay, and on the northern sh.o.r.e of King William Land. In Iglulik, and probably in Pond Bay, boats are rarely used and never made, as wood is wanting. The central part of this timber is made a little narrower than the ends, which form stout heads. A mortise is cut into each of the latter, into which posts (kiglo) are tenoned for the bow and for the stern. The shape of this part will best be seen from the engraving (Fig. 479). A strong piece of wood is fitted to the top of these uprights and the gunwales are fastened to them with heavy thongs. The gunwales and two curved strips of wood (akuk), which run along each side of the bottom of the boat from stem to stern, determine its form. These strips are steadied by from seven to ten cross pieces, which are firmly tied to them and to the central piece. From this pair of strips to the gunwales run a number of ribs, which stand somewhat close together at the bow and the stern, but are separated by intervals of greater distance in the center of the boat. The cross pieces along the bottom are arranged similarly to the ribs. Between the gunwale and the bottom two or three pairs of strips also run along the sides of the boat and steady its whole frame. The uppermost pair (which is called tuving) lies near the gunwale and serves as a fastening for the cover of the boat. The thwarts, three or four in number, are fastened between the gunwale and these lateral strips. All these pieces are tied together with thongs, rivets not being used at all.
[Ill.u.s.tration: FIG. 480. Umiaq or skin boat.]
[Ill.u.s.tration: FIG. 481. Umiaq or skin boat.]
The frame is covered with skins of ground seals (Figs. 480, 481). It requires three of these skins to cover a medium sized boat; five to cover a large one. If ground seals cannot be procured, skins of harp or small seals are used, as many as twelve of the latter being required.
The cover is drawn tightly over the gunwale and, after being wetted, is secured by thongs to the lateral strip which is close to the gunwale.
The wooden pieces at both ends are perforated and the thongs for fastening the cover are pulled through these holes.
The boat is propelled by two large oars. The rowlocks are a very ingenious device. A piece of bone is tied upon the skin in order to protect it from the friction of the oar, which would quickly wear it through (Fig. 481 _a_). On each side of the bone a thong is fastened to the tuving, forming a loop. Both loops cross each other like two rings of a chain. The oar is drawn through both loops, which are twisted by toggles until they become tight. Then the toggles are secured between the gunwale and the tuving.
The oar (ipun) consists of a long shaft and an oval or round blade fastened to the shaft by thongs. Two grooves and the tapering end serve for handles in pulling. Generally three or four women work at each oar.
For steering, a paddle is used of the same kind as that used in whaling (see p. 499). A rudder is rarely found (Fig. 480), and when used most probably is made in imitation of European devices.
If the wind permits, a sail is set; but the bulky vessel can only run with the wind. The mast is set in the stem, a mortise being cut in the forehead of the main timber, with a notch in the wooden piece above it to steady it. A stout thong, which pa.s.ses through two holes on each side of the notch, secures the mast to the wooden head piece. The sail, which is made of seal intestines carefully sewed together, is squared and fastened by loops to a yard (sadniriaq) which is trimmed with straps of deerskin. It is hoisted by a rope made of sealskin and pa.s.sing over a sheave in the top of the mast. This rope is tied to the thwart farthest abaft, while the sheets are fastened to the foremost one.
THE SLEDGE AND DOGS.
During the greater part of the year the only pa.s.sable road is that afforded by the ice and snow; therefore sledges (qamuting) of different constructions are used in traveling.
[Ill.u.s.tration: FIG. 482. Qamuting or sledge.]
The best model is made by the tribes of Hudson Strait and Davis Strait, for the driftwood which they can obtain in abundance admits the use of long wooden runners. Their sledges (Fig. 482) have two runners, from five to fifteen feet long and from twenty inches to two and a half feet apart. They are connected by cross bars of wood or bone and the back is formed by deer"s antlers with the skull attached. The bottom of the runners (qamun) is curved at the head (uinirn) and cut off at right angles behind. It is shod with whalebone, ivory, or the jawbones of a whale. In long sledges the shoeing (pirqang) is broadest near the head and narrowest behind. This device is very well adapted for sledging in soft snow; for, while the weight of the load is distributed over the entire length of the sledge, the fore part, which is most apt to break through, has a broad face, which presses down the snow and enables the hind part to glide over it without sinking in too deeply.
[Ill.u.s.tration: FIG. 483. Sledge shoe. (National Museum, Washington.
34096.) ]
The shoe (Fig. 483) is either tied or riveted to the runner. If tied, the lashing pa.s.ses through sunken drill holes to avoid any friction in moving over the snow. The right and left sides of a whale"s jaw are frequently used for shoes, as they are of the proper size and permit the shoe to be of a single piece. Ivory is cut into flat pieces and riveted to the runner with long treenails. The points are frequently covered with bone on both the lower and upper sides, as they are easily injured by striking hard against hummocks or snowdrifts. Sometimes whalebone is used for the shoes.
The cross bars (napun) project over the runners on each side and have notches which form a kind of neck. These necks serve to fasten the thongs when a load is lashed on the sledge. The bars are fastened to the runners by thongs which pa.s.s through two pairs of holes in the bars and through corresponding ones in the runners. If these fastenings should become loose, they are tightened by winding a small thong round them and thus drawing the opposite parts of the thong tightly together. If this proves insufficient, a small wedge is driven between the thong and the runner.
The antlers attached to the back of the sledge have the branches removed and the points slanted so as to fit to the runners. Only the brow antlers are left, the right one being cut down to about three inches in length, the left one to one and a half inches. This back forms a very convenient handle for steering the sledge past hummocks or rocks, for drawing it back when the points have struck a snowdrift, &c. Besides, the lashing for holding the load is tied to the right brow antler and the snow knife and the harpoon line are hung upon it.
Under the foremost cross bar a hole is drilled through each runner.
A very stout thong (pitu) consisting of two separate parts pa.s.ses through the holes and serves to fasten the dogs" traces to the sledge.
A b.u.t.ton at each end of this thong prevents it from slipping through the hole of the runner. The thong consists of two parts, the one ending in a loop, the other in a peculiar kind of clasp (partirang). Fig. 484 represents the form commonly used. The end of one part of the thong is fastened to the hole of the clasp, which, when closed, is stuck through the loop of the opposite end (see Fig. 482). A more artistic design is shown in Fig. 485. One end of the line is tied to the hole in the under side of this implement. When it is in use the loop of the other end is stuck through another hole in the center and hung over the nozzle. The whole represents the head of an animal with a gaping mouth. The dogs"
traces are strung upon this line by means of the uqsirn, an ivory implement with a large and a small eyelet (Fig. 486). The trace is tied to the former, while the latter is strung upon the pitu.
[Ill.u.s.tration: FIG. 484. Clasp for fastening traces to sledge.
(National Museum, Washington. 34110.) ]
[Ill.u.s.tration: FIG. 485. Artistic form of clasp for fastening traces to sledge. (Museum fur Volkerkunde, Berlin.) 1/1]
The dogs have harnesses (ano) made of sealskin (Fig. 487) or sometimes of deerskin, consisting of two bights pa.s.sing under the fore legs. They are joined by two straps, one pa.s.sing over the breast, the other over the neck. The ends are tied together on the back, whence the trace runs to the sledge. According to Parry (II, p. 517), the Iglulik harnesses consisted of three bights, one pa.s.sing over the breast and shoulder and two under the fore legs.
[Ill.u.s.tration: FIG. 486. Uqsirn, for fastening traces to pitu. _a_ (National Museum, Washington. 34122.) 1/1 _b_ (Museum fur Volkerkunde, Berlin.) ]
It was mentioned at another place (p. 475) that in sealing a dog is taken out of the sledge to lead the hunter to the breathing hole. For this purpose the traces of some harnesses are made of two pieces, which are united by the sadniriaq, a clasp similar to that of the pitu (Figs.
487, 488). If the dog is to be taken from the sledge the fore part of the trace is unb.u.t.toned.
[Ill.u.s.tration: FIG. 487. Ano or dog harness. (Museum fur Volkerkunde, Berlin. IV A 6730.)]
[Ill.u.s.tration: FIG. 488. Sadniriaq or clasp. (National Museum, Washington.) ?]
Besides this form of sledge a great number of others are in use.
Whenever whales are caught their bone is sawed or cut into large pieces, which are shod with the same material. If large bones are not to be had, a subst.i.tute is found in walrus skins or rolls of sealskins, which are wetted and sewed up in a bag. This bag is given the desired form and after being frozen to a solid ma.s.s is as serviceable as the best plank.
In Boothia frozen salmon are used in the same way and after having served this purpose in winter are eaten in the spring. Other sledges are made of slabs of fresh water ice, which are cut and allowed to freeze together, or of a large ice block hollowed out in the center. All these are clumsy and heavy and much inferior to the large sledge just described.
Parry (II, p. 515) states that at Igiulik the antlers are detached from the sledge in winter when the natives go sealing. The tribes of Davis Strait do not practice this custom, but use scarcely any sledge without a pair of antlers.
As to the appearance of the dogs I would refer to Parry (II, p. 515) and other writers and confine my remarks to a description of their use by the Eskimo.
As the traces are strung upon a thong, as just described, the dogs all pull at one point; for that reason they may seem, at first sight, to be harnessed together without order or regularity; but they are arranged with great care. The strongest and most spirited dog has the longest trace and is allowed to run a few feet in advance of the rest as a leader; its s.e.x is indifferent, the choice being made chiefly with regard to strength. Next to the leader follow two or three strong dogs with traces of equal length, and the weaker and less manageable the dogs the nearer they run to the sledge. A team is almost unmanageable if the dogs are not accustomed to one another. They must know their leader, who brings them to terms whenever there is a quarrel. In a good team the leader must be the acknowledged chief, else the rest will fall into disorder and refuse to follow him. His authority is almost unlimited.
When the dogs are fed, he takes the choice morsels; when two of them quarrel, he bites both and thus brings them to terms.
Generally there is a second dog which is inferior only to the leader, but is feared by all the others. Though the authority of the leader is not disputed by his own team, dogs of another team will not submit to him. But when two teams are accustomed to travel in company the dogs in each will have some regard for the leader of the other, though continuous rivalry and quarrels go on between the two leaders. Almost any dog which is harnessed into a strange team will at first be unwilling to draw, and it is only when he is thoroughly accustomed to all his neighbors and has found out his friends and his enemies that he will do his work satisfactorily. Some dogs when put into a strange team will throw themselves down and struggle and howl. They will endure the severest lashing and allow themselves to be dragged along over rough ice without being induced to rise and run along with the others.
Particularly if their own team is in sight will they turn back and try to get to it. Others, again, are quite willing to work with strange dogs.
Partly on this account and partly from attachment to their masters, dogs sold out of one team frequently return to their old homes, and I know of instances in which they even ran from thirty to sixty miles to reach it.
Sometimes they do so when a sledge is traveling for a few days from one settlement to another, the dogs not having left home for a long time before. In such cases when the Eskimo go to harness their team in the morning they find that some of them have run away, particularly those which were lent from another team for the journey. In order to prevent this the left fore leg is sometimes tied up by a loop which pa.s.ses over the neck. When one is on a journey it is well to do so every night, as some of the dogs are rather unwilling to be harnessed in the morning, thus causing a great loss of time before they are caught. In fact such animals are customarily tied up at night, while the others are allowed to run loose.
Sometimes the harnesses are not taken off at night. As some dogs are in the habit of stripping off their harness, it is fastened by tying the trace around the body. Though all these peculiarities of the dogs give a great deal of trouble to the driver, he must take care not to punish them too severely, as they will then become frightened and for fear of the whip will not work at all.
Before putting the dogs to the sledge it must be prepared and loaded.
In winter the shoes of the runners are covered with a thick coat of ice, which diminishes the friction on the snow. If the shoes are of good bone, ivory, or whalebone, the icing is done with water only, the driver taking a mouthful and carefully letting it run over the shoe until a smooth cover of about one third of an inch in thickness is produced. The icicles made by the water which runs down the side of the runner are carefully removed with the snow knife, and the bottom is smoothed with the same implement and afterward somewhat polished with the mitten. Skin runners and others which have poor shoes are first covered with a mixture of moss and water or clay and water. This being frozen, the whole is iced, as has been described. Instead of pure water, a mixture of blood and water or of urine and water is frequently used, as this sticks better to the bone shoe than the former.
This done, the sledge is turned right side up and loaded. In winter, when the snow is hard, small sledges with narrow shoes are the best. In loading, the bulk of the weight is placed behind. When the snow is soft or there are wide cracks in the floe, long sledges with broad shoes are by far the best. In such cases the heaviest part of the load is placed on the middle of the sledge or even nearer the head. Particularly in crossing cracks the weight must be as near the head as possible, for if the jump should be unsuccessful a heavy weight at the hind part would draw the sledge and the dogs into the water.
The load is fastened to the sledge by a long lashing (naqetarun). This is tied to the first cross bar and after pa.s.sing over the load is drawn over the notch of the next bar, and so on from one notch, over the load, to a notch on the opposite side. After having been fastened in this way it is tightened. Two men are required for the work, one pulling the lashing over the notch, the other pressing down the load and lifting and lowering the thong in order to diminish the friction, thus making the pulling of the other man more effective. The end is fastened to the brow antler. Implements which are used in traveling are hung upon the antlers at the back of the sledge. In spring, when the snow is melting and water is found under it, the travelers frequently carry in their pouch a tube for drinking (Fig. 489).
[Ill.u.s.tration: FIG. 489. Tube for drinking. (National Museum, Washington. 10383.) ]