CHAPTER IX.
EXPERIMENTAL DYEING AND COMPARATIVE DYE TESTING.
Every dyer ought to be able to make experiments in the mordanting and dyeing of textile fibres for the purpose of ascertaining the best methods of applying mordants or dye-stuffs, the best methods of obtaining any desired shade, and for the purpose of making comparative tests of dyes or mordanting materials with the object of determining their strength and value. This is not by any means difficult, nor does it involve the use of any expensive apparatus, so that a dyer need not hesitate to set up a small dyeing laboratory for fear of the expense which it might entail.
In order to carry out the work indicated above there will be required several pieces of apparatus. First, a small chemical balance, one that will carry 100 grams in each pan is quite large enough; and such a one, quite accurate enough for this work, can be bought for 25s. to 30s., while if the dyer be too poor even for this, a cheap pair of apothecaries" scales might be used. It is advisable to procure a set of gram weights, and to get accustomed to them, which is not a very difficult task.
In using the balance always put the substance to be weighed on the left-hand pan, and the weights on the right-hand pan. Never put chemicals of any kind direct on the pan, but weigh them in a watch gla.s.s, small porcelain basin, or gla.s.s beaker, which has first been weighed, according to the nature of the material which is being weighed. The sets of weights are always fitted into a block or box, and every time they are used they should be put back into their proper place.
The experimenter will find it convenient to provide himself with a few small porcelain basins, gla.s.s beakers, cubic centimetre measures, two or three 200 c.c. flasks with a mark on the neck, a few pipettes of various sizes, 10 c.c., 20 c.c., 25 c.c.
The most important feature is the dyeing apparatus. Where only a single dye test is to be made, a small copper or enamelled iron saucepan, such as can be bought at any ironmonger"s, may be used; this may conveniently be heated by a gas boiling burner, such as can also be bought at an ironmonger"s or plumber"s for 2s.
[Ill.u.s.tration: FIG. 44.--Experimental Dye-bath.]
It is, however, advisable to have means whereby several dyeing experiments can be made at one time and under precisely the same conditions, and this cannot be done by using the simple means noted above.
To be able to make perfectly comparative dyeing experiments it is best to use porcelain dye-pots--these may be bought from most dealers in chemical apparatus--and to heat them in a water-bath arrangement.
The simplest arrangement is sketched in Fig. 44; it consists of a copper bath measuring 15 inches long by 10-1/2 inches broad and 6-1/2 inches deep--this is covered by a lid in which are six apertures to take the porcelain dye-baths. The bath is heated by two round gas boiling burners of the type already referred to.
The copper bath is filled with water, which, on being heated to the boil by the gas burners, heats up the dye liquids in the dye-pots. The temperature in the dye-pots under such conditions can never reach the boiling point; where it is desirable, as in some cases of wool mordanting and dyeing, that it should boil, there should be added to the water in the copper bath a quant.i.ty of calcium chloride, which forms a solution that has a much higher boiling point than that of water, and so the dye liquors in the dye-pots may be heated up to the boil.
An objection might be raised that with such an apparatus the temperature in every part of the bath may not be uniform, and so the temperature of the dye-liquors in the pots may vary also, and differences of temperature often have a considerable influence on the shade of the colour which is being dyed. This is a minor objection, which is more academic in its origin than of practical importance. To obviate this Mr.
William Marshall of the Rochdale Technical School has devised a circular form of dye-bath, in which the temperature in every part can be kept quite uniform.
The dyeing laboratories of technical schools and colleges are generally provided with a more elaborate set of dyeing appliances. These, in the latest constructed, consist of a copper bath supported on a hollow pair of trunnions, that the bath can be turned over if needed. Into the bath are firmly fixed three earthenware or porcelain dye-pots; steam for heating can be sent through the trunnions. After the dyeing tests have been made the apparatus can be turned over, and the contents of the dye-pots emptied into a sink which is provided for the purpose.
Many other pieces of apparatus have been devised and made for the purpose of carrying on dyeing experiments on the small scale, but it will not be needful to describe these in detail. After all no more efficient apparatus can be desired than that described above.
Dyeing experiments can be made with either yarns or pieces of cloth--swatches, as they are commonly called--a very convenient size is a small skein of yarn or a piece of cloth having a weight of 5 grams.
These test skeins or pieces ought to be well washed in hot water before use, so that they are clean and free from any size or grease. A little soda or soap will facilitate the cleansing process.
In carrying out a dyeing test the dye-pot should be filled with the water required, using as little as can be consistent with the dye swatch being handled comfortably therein, then there is added the required mordants, chemicals, dyes, etc., according to the character of the work which is being done.
Of such chemicals as soda, caustic soda, sodium sulphate (Glauber"s salt), tartar, bichromate of potash, it will be found convenient to prepare stock solutions of known strength, say 50 grams per litre, and then by means of a pipette any required quant.i.ty can be conveniently added. The same plan might be followed in the case of dyes which are constantly in use, in this case, 5 grams per litre will be found strong enough.
Supposing it is desired to make a test of a sample of direct red, using the following proportions: 2 per cent. dye-stuff, 3 per cent. soda, 15 per cent. Glauber"s salt, and the weight of the swatch which is being used is 5 grams. The following calculations are to be made to give the quant.i.ties of the ingredients required.
For the dye-stuff:--
5 (weight of swatch) multiplied by 2 (per cent. of dye) and divided by 100 equals--
5 x 2 ------- = 0.1 gram dye 100
For the soda we have similarly:--
5 x 3 ------- = 0.15 gram soda.
100
For the Glauber"s salt:--
5 x 15 -------- = 0.75 gram Glauber"s salt.
100
These quant.i.ties may be weighed out and added to the dye-bath, or if solutions are kept, a calculation can be made as to the number of cubic centimetres which contain the above quant.i.ties, and these measured out and added to the dye-bath.
When all is ready, the bath is heated up, the swatch entered, and the work of the test entered upon.
Students are recommended to make experiments on such points as:--
The shades obtained by using various proportions of dye-stuffs.
The influence of various a.s.sistants--common salt, soda, Glauber"s salt, borax, phosphate of soda--in the bath.
The influence of varying proportions of mordants on the shade of dyeing.
The value of various a.s.sistants, tartar, oxalic acid, lactic acid, sulphuric acid, on the fixation of mordants.
The relative value of different tannin matters, etc.
Each dyer should make himself a pattern-book into which he should enter his tests, with full particulars as to how they have been produced at the side.
It is important that a dyer should be able to make comparative dye tests to ascertain the relative strength of any two, or more samples of dyes which may be sent to him. This is not difficult, but requires considerable care in carrying out the various operations involved.
Of each of the samples of dyes 0.5 gram should be weighed out and dissolved in 100 c.c. of water, care being taken that every portion of the dye is dissolved before any of the solution is used in making up the dye-vats. Care should also be taken that the skeins of yarn or swatches of cloth are exactly equal in weight; that the same volume of water is placed in each of the dye-pots; that the same amount of sulphate of soda or other dye a.s.sistants are added; that the quant.i.ties of dye-stuff and solutions used are equal; in fact, that in all respects the conditions of dyeing are exactly the same, such, in fact, being the vital conditions in making comparative dye tests of the actual dyeing strength of several samples of dyes.
After the swatches have been dyed they are rinsed and then dried, when the depth of shade dyed on them may be compared one with another. To prevent any mistakes, it is well to mark the swatches with one, two, three or more cuts as may be required.
It is easier to ascertain if two dyes are different in strength of colour than to ascertain the relative difference between them. There are two plans available for this purpose--one is a dyeing test, the other is a colorimetric test made with the solutions of the dyes.
=Dyeing Test.=--This method of ascertaining the relative value of two dyes as regards strength of colour is carried out as follows: A preliminary test will show which is stronger than the other. Then there is prepared a series of dye-vats--one contains a swatch with the deepest of the two dyes, which is taken as the standard; the others, swatches with the other dye, but containing 2, 5 and 10 per cent. more dye-stuff, and all these swatches are dyed together, and after drying a comparison can be made between them and the standard swatch and a judgment formed as to the relative strength of the two dyes. A little experience will soon enable the dyer to form a correct judgment of the difference in strength between two samples of dye-stuff.
=Colorimetric Test.=--This is based on the principle that the colour of a solution of dye-stuff will be proportionate to its strength. Two white gla.s.s tubes equal in diameter are taken. Solutions of the dye-stuff, 0.5 gram in 100 c.c. of water, are prepared, care being taken that the solution is complete. Of one of these solutions 5 c.c. is taken and placed in one of the gla.s.s tubes, and 5 c.c. of the other solution is placed in the other gla.s.s tube. Of water 25 c.c. is now added to each tube, and then the colour of the diluted liquids is compared by looking through them in a good light. That sample which gives the deeper solution is the stronger in colouring power. By diluting the stronger solution with water until it is of the same depth of colour as the weaker, it may be a.s.sumed that the depth of the columns of liquid in the two tubes is in proportion to the relative strength of the two samples.
Thus, if in one tube there are 30 c. of liquid and in the other 25 c., then the relative strength is as 30 to 25; and if the first is taken as the standard at 100, a proportion sum gives
30 : 25 : : 100 : 83.3,
that is, the weaker sample has only 83.3 per cent, of the strength of the stronger sample.
INDEX.