PHOTO-MECHANICAL LINE BLOCKS.--The photo-mechanical line block, commonly known as a zinco, is in a sense the lineal descendant of the wood block. As a means of reproduction the possibilities of line blocks are very great, for not only is it possible to reproduce by their means all kinds of line drawings, but also drawings in charcoal and crayon, provided they be suitably executed on a proper grained surface. In fact, an artist or draughtsman who has a thorough knowledge of the process and its capabilities can obtain extraordinary results. The process has the further advantage of being both quick and inexpensive, a few hours only being required to make the finished product.
Their mode of manufacture is the same in principle as for half-tone blocks; in the case of the latter, the method known as the enamel process was described; in the present instance a different procedure may be dealt with.
A photograph of the drawing is taken on a negative, the wet collodion process being generally followed, although dry process plates may be used.
A highly polished zinc plate is sensitised with bichromate of potash and gelatine, or by other means, and, when dry, is exposed under the negative.
The exposed metal plate is then taken into the dark room and evenly, but thinly, coated with etching ink. When the ink is dry, the plate is developed in water; the unexposed gelatine, and with it, the ink, will come away, its removal being helped by the judicious application of a dabber of wet cotton wool.
The plate may next be "rolled over" with an ink which will more stoutly resist the action of the acid than that used in the first inking, but prior to this it is usual to soak the plate in a mixture of gallic acid, phosphoric acid and gum. This second rolling up must be carried out as if the plate were for lithographic reproduction; and, when dry, powdered resin may be applied, in order to make a better acid-resist, as in the preparation of a lithographic stone.
The plate is now etched slightly in a weak solution of nitric acid; it is then rinsed, dabbed dry and placed upon a hot plate until the resin has stuck well to the ink. When cool, the margins, sides and back are protected from the action of the acid by means of a varnish and the plate is given its first real etch, which is a very slight one. After rinsing and drying, the plate is again heated until the ink and resin have melted and flowed down the exposed sides of the ridges of metal produced in the first etching. This application of ink and resin must be repeated in order that the exposed sides of the ridges may be well covered with the acid-resist and so will not be undercut. The plate is then given its second etch, and this is done with a stronger acid, after which the sides of the lines are again protected with resinous material in the same way as before. The third etch follows, after which the metal is thoroughly cleansed from all the ink, etc.
In order to smooth the shoulders of the lines, the plate is given a finishing etch: the cleaned plate is warmed and rolled up with hard etching ink; the metal is then heated until the ink becomes glazed, and, when cool, is placed in the acid bath for the requisite amount of time. If necessary the plate, after cleaning, is touched up with a graver, and the superfluous metal is cut away. Finally it is mounted on a block of wood, and after the corners and sides have been trimmed square, the block is ready for the press.
To ill.u.s.trate the enormous improvement which may result from the block pa.s.sing through the hands of a skilful engraver, two line blocks of a wood engraving by Riocreux (see p. 36) have been prepared. Fig. 7 is the impression given by the block as ordinarily turned out, whilst Fig. 8 is a precisely similar block which has been worked up by an engraver.
[Ill.u.s.tration: Fig. 7]
[Ill.u.s.tration: Fig. 8]
There are several other methods of making the blocks, but the principles are the same as in the foregoing process.
In examining the proofs it must be remembered that deletions are not the only alterations that can be made in the finished block; not only can lines be cut away, or their character altered by removing part of the metal from them, but additions can be made in reason. For instance, lines can be added across open s.p.a.ces, and if part of the printing surface has been accidentally removed in cutting away the superfluous metal, the damage can be made good by building up with solder and working on this with the graver. If, however, the additions required are at all extensive or complicated, it is better to have a new block made.
Inasmuch as scientific ill.u.s.trations are to describe and explain definite facts, the drawings must needs be materialistic rather than suggestive; in other words, a more or less conventional system must be employed.
In making their drawings for reproduction by line blocks, authors have at their disposal the black line, the white line, the black s.p.a.ce, the white s.p.a.ce, the black dot and the white dot, all of which may be combined in various ways. No tones, other than black and white, are available; if it be desired to represent half-tones, they must be rendered by the above-mentioned means.
In the majority of cases the originals should be made with black ink on white Bristol board or smooth white paper; ordinary lead pencil drawings on smooth paper are useless, and lead pencil, black crayon or charcoal in combination with grained paper or board should not be employed unless the draughtsman has the requisite skill and knows exactly the limitations of the line block. For all ordinary folk black ink and Bristol board cannot be improved upon.
The drawing may be made first with a soft lead pencil, using the camera lucida or other optical aids to correct delineation. The pencil lines are then gone over with ink; for this purpose a good black ink is necessary. Wolff"s Indian ink, Higgins" waterproof ink and Steuber"s waterproof drawing ink are highly satisfactory, and there are many others. With regard to pens, a suitable implement is all-important; Gillott"s lithographic pens and Brandauer"s No. 515 are recommended. For straight lines of an even thickness a ruling pen is very useful, and these may be obtained fitted with an adjustment which enables the worker to rule a line of a definite thickness, _e.g._, .5 mm. and so on.
All drawings should be made larger than it is intended the reproduction to be, for slight inaccuracies, ragged lines, and other blemishes will thus appear less obvious. This drawing on a large scale is often a stumbling block, because the work appears too open and the draughtsman is tempted to put in too much; this must be avoided, else the crowded lines may join together in the reduced reproduction. Also it must be remembered not to draw too finely, else the work in parts may disappear entirely in the reproduction. In drawing on an enlarged scale a certain amount of exaggeration may be employed, in order that when reduced the drawing may not be quite spiritless.
When representing a solid object, such as a plant or an animal, to shew the external morphology, it is to be borne in mind that form is the main thing to represent, and this can be expressed by outline drawing alone. In fact, more or less primitive methods must be employed, and better models cannot be followed than the best wood cuts.
[Ill.u.s.tration: Fig. 9. The Lesser Celandine (_Ranunculus Ficaria_). By R. G. Hatton. (From Hatton"s _Craftsman"s Handbook_).]
[Ill.u.s.tration: Fig. 10. The Lesser Celandine. After Fuchs. (From Hatton"s _Craftsman"s Handbook_.)]
An examination of figures 10 and 12 will shew that Fuchs[A] attained his object by simple outline drawings; he never employed local colour, and shading he used very spa.r.s.ely indeed, and then only to give expression to the form of some thick part. Fuchs"s celandine (Fig. 10) should be compared with the drawing of the same plant (Fig. 9) by R.
G. Hatton.
[Footnote A: The methods followed by the ill.u.s.trators of the Herbals may be conveniently studied in Hatton"s "The Craftsman"s Plant Book," London, 1909, and Arber"s "Herbals,"
Cambridge, 1912.]
[Ill.u.s.tration: Fig. 11. The Apple (_Pyrus Malus_). After Matthiolus.
(From Hatton"s _Craftsman"s Handbook_).]
The methods of Matthiolus (Figs. 11 and 13) were somewhat more advanced, for he used shading not only to express form but also to give a certain amount of relief. It will be noticed that he shaded by lines which followed the moulding of the parts.
The work of Riocreux (Fig. 8) should also be studied; it will be observed that he managed to get a very high relief in his drawings by the simple means of straight or curved lines, according to the shape of the part, of varying thicknesses.
[Ill.u.s.tration: Fig. 12. Charlock (_Bra.s.sica Sinapis_). After Fuchs.
(From Hatton"s _Craftsman"s Handbook_)]
There is no necessity for keeping all the lines of even thickness.
For instance, provided the character of the form is not altered, the outline on the shaded side may be made thicker than on the illuminated side; also distance can be indicated by the use of thinner lines, for these, although really black, will give the impression of greyness.
Then again, a line may be drawn with local increases and decreases in thickness, as in ordinary writing, and such lines drawn by a skilled hand can be made to express a marvellous amount of modelling.
[Ill.u.s.tration: Fig. 13. Sea Lavender (_Statice Limonium_). After Matthiolus.
(From Hatton"s _Craftsman"s Handbook_.)]
The draughtsman, however, is not restricted to lines; any marks which can be made with a pen and black ink may be employed, provided they be sufficiently firm and large.
The accompanying figure (14) which is a reduction of an ill.u.s.tration in Church"s _Floral Mechanisms_, ill.u.s.trates the use of lines of varying lengths for shading.
[Ill.u.s.tration: Fig. 14. _Viola odorata_: Floral morphology. A reduction of a figure in Church"s _Floral Mechanisms_.]
In shading, the effect of shadow may be obtained by increasing the thickness of the lines, but they must not be drawn too closely together; on the other hand, the lighter parts can be represented by thinner lines placed further and further apart, and the lightest parts by the white of the paper. Cross hatching may also be employed (see Fig. 15), but the crossed lines must not be too close together, for otherwise they will tend to thicken in the making of the block and so will print too black.
[Ill.u.s.tration: Fig. 15. A Seedling of _Abronia villosa_.]
For very delicate shading and tinting, stipple may be employed, but the dots must be quite definite, sufficiently large to stand reduction, and not too close together (Figs. 18, 28c, and 32). A particularly good example of this method will be found in Butler"s paper on _Allomyces_ in the Annals of Botany, 1911, vol. 25. Dots have also been employed in Fig. 28c (p. 69).
With regard to local colour; this may be indicated by shading, by a white s.p.a.ce, or by a black s.p.a.ce.
Hitherto, drawing with black ink on white paper alone has been considered, but the reverse is equally available; much can be expressed by drawing with white ink on black paper.
Drawing in white upon a black ground is not frequently attempted, but an excellent example by Miss Janet Robertson is shewn in figure 16, which is well worthy of study, since it ill.u.s.trates to a nicety some of the means at the disposal of the draughtsman for line blocks. The black surface is best obtained by the use of a waterproof Indian ink applied with a brush to a white surface, the drawing being made with a dense white ink, using a pen or a brush. The white ink may be made by diluting any good opaque white water-colour paint, or process white may be used. The composition of this should be zinc oxide or baryta, for these do not darken with age; the author once used for this purpose a white pigment which proved excellent at the time; the drawings, however, subsequently turned dark brown owing to the fact that the basis of the paint was apparently a compound of silver.
[Ill.u.s.tration: Fig. 16. _Neuropteris Heterophylla_.
A line reproduction of a drawing by Miss Janet Robertson.]
The top part of the drawing (Fig. 16), shewing the general morphology of the plant, was drawn with a brush charged with white ink upon a black ground. In the simplest possible way relief has been obtained by representing the leaflets of the nearer fronds by white s.p.a.ces, whilst those further away are represented by white outlines. An enlargement of a frond is shewn on the lower part of the picture, and here the parts are represented in black on a white ground. The leaflets are in black outline and the fruits are made to stand out, as in the upper part, by the use of local colour--in this instance black--their shape being indicated by the curve of the higher lights. In brief, a very effective drawing has been made by the simplest use of the white line, the white s.p.a.ce, the black line and the black s.p.a.ce.
[Ill.u.s.tration: Fig. 17. _Fucus volubilis_, var. _Flexuosus_, a seaweed.
(From a drawing by Miss Baker.)]
This may be compared with figure 17, which was drawn by Miss Baker; the method pursued is entirely different to the last, it being a pure pen and ink drawing on white paper. No local colour has been employed, and the modelling has been expressed by the lines used for shading which have been made by short strokes with a fine pen. The result is suggestive of an engraving but this was not intentional; under no circ.u.mstances should an attempt be made to imitate in a relief block effects which can only be obtained by intaglio.
From what has been said it is obvious that the photo-mechanical line block can be used for the reproduction of all kinds of drawings in pure black and white; to ill.u.s.trate this figures 18-26 have been inserted.
[Ill.u.s.tration: Fig. 18. The Larkspur (_Delphinium ajacis_). By R. G.