The next day, Sunday, it began to snow, and we realized that our chance of skating up to Willow Clump Island was spoiled. All the afternoon it snowed, and the next morning we woke to find the ground covered to a depth of eight inches and snow still falling. But who ever heard of a boy complaining because there was snow on the ground? Here were new difficulties to overcome, new problems to solve, and new sports provided for our amus.e.m.e.nt. There was no disappointment shown by any of the members of the S. S. I. E. E. of W. C. I., as they met in the woodshed immediately after breakfast to discuss proceedings for the day. There seemed to be but one way of reaching the island, and that was by means of snow shoes. Bill had only a vague idea of how snow shoes were made.
CHAIR SEAT SNOW SHOE.
[Ill.u.s.tration: Fig. 22. Chair Seat Snow Shoe]
The first pair was made from a couple of thin wooden chair seats which we found in the shed. They proved quite serviceable, being very light and offering a fairly large bearing surface. The chair seats were trimmed off at each side to make the shoes less clumsy, and a loop of leather was fastened near the center of each shoe, in which the toe could be slipped. This shoe possessed the disadvantage of being too flat and of picking up too much snow when used.
BARREL STAVE SNOW SHOE.
[Ill.u.s.tration: Fig. 23. Barrel Stave Snow Shoe.]
Another pair of shoes was made from barrel staves. At first one stave was made to serve for a shoe, but we found that two staves fastened together with a pair of wooden cleats were much better. Jack was the proud inventor of these shoes and insisted that they were far more satisfactory than the elaborate ones which were later devised.
BARREL HOOP SNOW SHOE.
[Ill.u.s.tration: Fig. 24. Barrel Hoop Snow Shoe.]
Now that Jack had shown his ingenuity, Fred thought it was his turn to do something, and after mysteriously disappearing for the s.p.a.ce of an hour we saw him suddenly come waddling back to the shed on a pair of barrel hoops covered with heavy canvas. He had stretched the canvas so tightly across the hoops that they were bent to an oval shape. It was claimed for these shoes, and with good reason, that they were not so slippery as the barrel stave shoe, for they permitted the foot to sink slightly into the snow.
After dinner, Dutchy came back with a book of his father"s, a sort of an encyclopedia in which several different kinds of snow shoes were ill.u.s.trated. Reddy, whose father owned a sawmill, volunteered to provide us with strips of hickory from which to make the frames.
THE SIOUX SNOW SHOE.
[Ill.u.s.tration: Fig. 25. Sioux Shoe.]
[Ill.u.s.tration: Fig. 26. Frame of the Sioux Shoe.]
[Ill.u.s.tration: Fig 27. Web of the Sioux Shoe.]
[Ill.u.s.tration: Fig. 28. Weaving Needle]
The Sioux snow shoe was the first type we tackled. Two strips of hickory 4 feet long and 3/4 inch square in section, were bent over a pair of spreaders and securely fastened together at each end. The spreaders were about 12 inches long and located about 15 inches apart. They were notched at the ends, as shown in Fig. 26, to receive the side strips, which were not fastened together until after they had been nailed to the spreaders. We found that the most satisfactory way of fastening together the ends of the hickory strips was to bolt them together. When the frame was completed, we began the tedious process of weaving in the filling or web of the snow shoe. First we cut notches in the edges of the spreaders, s.p.a.cing these notches an inch apart. Then we procured several b.a.l.l.s of heavy twine at the corner store. Tying one end of the cord to the right side stick about three inches below the forward spreader, we stretched a strand down to the notch at the left end of the lower spreader. The strand was drawn taut, and after making several twists around it the cord was tied to the left side stick three inches above the spreader. From this point the cord was stretched to the notch at the right end of the upper spreader, twisted several times and brought back to the starting point. The cord was now wrapped around the side stick for a s.p.a.ce of about an inch, and then carried down to the second notch on the lower spreader, whence it was woven through the other two strands and tied about the left side stick about four inches from the spreader.
Thus the weaving continued, pa.s.sing the cord alternately over and under any cross strands encountered. In order to make the left side correspond with the right, a separate cord was wound around it, filling up the s.p.a.ce between the strands of the web. The filling above and below the spreaders could not be so methodically done, but we managed to weave the strands quite neatly with about the same mesh as used at the center. To facilitate the weaving we improvised a rough needle of a piece of wire.
The latter was bent double to receive the cord which was wedged in between the two arms of the needle.
THE IROQUOIS SHOE.
[Ill.u.s.tration: Fig. 29. Bending the Hickory Strips.]
[Ill.u.s.tration: Fig. 30. Frame of Iroquois Shoe.]
[Ill.u.s.tration: Fig. 31. Iroquois Snow Shoe.]
But the best snow shoe we made was the Iroquois shoe. The frame of this shoe was made of hickory strips of the same width and thickness as used in the Sioux shoe, but 8 feet long. The strips were bent in a loop and the ends were bolted together. How to bend the wood without breaking it seemed a very difficult problem. Wood, we knew, could be easily bent without breaking if boiled or steamed for a while; but we had nothing large enough in which to boil a strip of wood 8 feet long. Bill hit upon the plan of wrapping the stick with burlap and then pouring boiling water on it until it became sufficiently soft to bend easily. An old oats-sack was cut up into strips and wound onto the hickory sticks for a distance of 18 inches at each side of the center. We then repaired to the kitchen to do the steaming. The hickory stick was held over a large dish-pan filled with boiling water, and from this we dipped out the water and poured it slowly over the burlap wrapping of the stick. After a little of this treatment the stick was sufficiently steamed to permit of bending to the required shape. The ends were then firmly secured by means of bolts pa.s.sed through bolt holes which had been previously drilled. The frame was completed by fitting the spreader sticks in place, after which it was laid away to dry. When the frame was perfectly dry we started weaving the web. In this case, however, instead of cord we used cane strips, which we had bought from a chair caner. This necessitated drilling holes in the side sticks to receive the cane strips. The web consisted of strands crossing each other diagonally, as ill.u.s.trated. Our second pair of Iroquois snow shoes was made with a web of rawhide which we bought from a hardware store at Millville.
THE AINU SNOW SHOE.
[Ill.u.s.tration: Fig. 32. Ainu Snow Shoe.]
One of the snowshoes described in the book was very much like Fred"s barrel-hoop snow shoe in appearance. According to the description, it was a type used by the Ainus, a peculiar people living in the cold northern islands of j.a.pan. As the shoe seemed quite simple and rather unique, we thought we would make one like it. Two hickory strips each 4 feet long were bent to a U-shape and lashed together, forming an oval about 2 feet 6 inches long by 18 inches wide. The frame was held to oval shape by tying the sides together. Then the filling was woven in, running the strands diagonally, as shown in Fig. 32.
We had excellent weather for snow shoes after that snowstorm. A thaw followed by a cold spell caused a thick crust to form on the snow which would nearly hold us up without the aid of our snowshoes. We were rather awkward with those shoes for a while, trying to keep them clear of each other, and we found it particularly hard to turn sharply without causing one shoe to run foul of the other. But with a little practice we soon felt quite at home on them. In order to prevent cutting the web with our heels, we found it necessary to wear rubbers.
[Ill.u.s.tration: Fig. 33. The Norwegian Ski.]
Our vacation came to an end before we were prepared for the expedition to Willow Clump Island. But before leaving the subject on snow shoes, two more shoes remain to be described, namely the Swiss snow shoe and the Norwegian ski. The Swiss shoe was made during the summer and the ski during the following winter.
THE NORWEGIAN SKI.
[Ill.u.s.tration: Fig. 34. Bending the Ski.]
[Ill.u.s.tration: Fig. 35. The Ski Stick.]
The Norwegian ski was made of close-grained wood, 1 inch thick, 3-1/2 inches wide and 6 feet long. About 18 inches from the forward end the wood was planed down to a thickness of 1/4 of an inch. This end was placed in the dish-pan of boiling water, and in a short time it was pliable enough to permit of bending. It was secured in the proper bent position by slipping the toe end of the shoe between the banisters on the back porch and nailing a cleat back of the heel end. When the ski was perfectly dry the toe strap was nailed on just back of the balancing point, and also another strap, to be secured about the ankle. Then a cleat was nailed onto the ski to fit against the heel of the shoe. In use we found it best to cut a groove in the bottom of the ski, so as to give us a better grip on the snow in climbing up hills. With the skis we had to use short poles or "ski sticks" to a.s.sist in starting, stopping and steering when coasting. The ski stick was a bean pole provided with a wooden block near the lower end, to prevent it from being forced too far through the snow.
THE SWISS SNOW SHOE OR SWAMP SHOE.
[Ill.u.s.tration: Fig. 36. The Swiss Snow Shoe.]
The Swiss shoe was made primarily to a.s.sist us in exploring some boggy land a short distance up the river from our island. The original swamp shoes were made from the bottoms of two old baskets, and they worked so admirably that it was decided to equip the whole society with them.
Uncle Ed, when told about them, informed us that that was the kind of snow shoe used in Switzerland. Of course, we could not afford to destroy a pair of baskets for each member of the club, and so we had to weave the shoes from the willows which grew on the island.
CHAPTER IV.
TENT MAKING.
We had a farewell meeting of the society the evening before Bill and I had to return to boarding-school. At this meeting plans were made for the Easter vacation. We also considered the matter of getting parental permission for our summer outing. So far we had been afraid to breathe a word of our plans outside of the society, since Fred had said something about it in the presence of Father and had been peremptorily ordered to banish all such hair-brained, Wild West notions from his head. We realized from that incident that the consent of our parents would not be so very easily obtained. But Bill came forward with a promising suggestion. He would write to his Uncle Ed and see if he couldn"t be persuaded to join the expedition. At first we demurred. We didn"t want a "governor" around all the time. But Bill a.s.sured us that his uncle was "no ordinary man"; that he would not interfere with our plans, but would enter right into them and give us many valuable pointers. Though not by any means convinced, we told him to go ahead and invite his uncle, as that seemed about the only means of winning over our fathers and mothers. The society was then adjourned until our Easter vacation began, each member promising to earn and save as much money as he could in the meantime to buy the materials for a tent and provisions for the summer outing.
Word From Uncle Ed.
[Ill.u.s.tration: Fig. 37. Breadths sewed together for Roof and Side Walls of Tent.]
Bill"s letter to Uncle Ed was answered as quickly as the mail could travel to Brazil and back. Uncle Ed heartily approved of our plans, and said that he would be delighted to join the expedition. He could not be on hand before the 1st of July, but that would give us plenty of time to make all necessary preparations. He told us not to worry about gaining the consent of our parents. He would write to them and see them all personally, if necessary to win their approval.