Thus taking gravitation, a pound ma.s.s on the surface of the earth (a.s.suming it to be a sphere of 4,000 miles radius) would require the expenditure of 21,120,000 foot pounds to remove it to an infinite distance against gravity. The potential of a point in s.p.a.ce upon the surface of the earth is therefore negative and is represented by -21,120,000*32.2 foot poundals (32.2 = acceleration of gravity). (See Poundal.) In practice and conventionally all points on the earth"s surface are taken as of zero potential.
[Transcriber"s note; 21,120,000 foot pounds is about 8 KWh.]
429 STANDARD ELECTRICAL DICTIONARY.
Potential, Absolute.
The absolute electrical potential at a point possesses a numerical value and measures the tendency which the existing electric forces would have to drive an electrified particle away from or prevent its approach to the point, if such a particle, one unit in quant.i.ty, were brought up to or were situated at that point. It is numerically equal to the number of ergs of work which must be done to bring a positive unit of electricity from a region where there is absolutely no electric force up to the point in question. (Daniell.) Two suppositions are included in this. The region where there is an electric force has to be and only can be at an infinite distance from all electrified bodies. The moving of the particle must take place without any effect upon the distribution of electricity on other particles.
Potential, Constant.
Unchanging potential or potential difference.
The ordinary system of incandescent lighting is a constant potential system, an unvarying potential difference being maintained between the two leads, and the current varying according to requirements.
Potential Difference, Electric.
If of any two points the absolute potentials are determined, the difference between such two expresses the potential difference.
Numerically it expresses the quant.i.ty of work which must be done to remove a unit of electricity from one to the other against electric repulsion, or the energy which would be acc.u.mulated in moving it the other way.
A positively charged particle is driven towards the point of lower potential. A negatively charged body is driven in the reverse direction.
Potential Difference, Electro-motive.
A difference of potential in a circuit, or in part of a circuit, which difference produces or is capable of producing a current, or is due to the flow of such current.
It may be expressed as the fall in potential or the electro-motive force included between any two points on a circuit. The current in an active circuit is due to the total electro-motive force in the circuit. This is distributed through the circuit in proportion to the resistance of its parts. Owing to the distribution of electro-motive force throughout a circuit including the generator, the terminals of a generator on closed circuit may show a difference of potential far lower than the electro-motive force of the generator on closed circuit. Hence potential difference in such a case has been termed available electro-motive force.
Potential, Electric Absolute.
The mathematical expression of a property of a point in s.p.a.ce, measuring the tendency which existing electric forces would have to drive an electrified unit particle away from or prevent its approach to the point in question, according to whether the point was situated at or was at a distance from the point in question.
Potential is not the power of doing work, although, as it is expressed always with reference to a unit body, it is numerically equal to the number of ergs of work which must be done in order to bring a positive unit of electricity from a region where there is no electric force--which is a region at an infinite distance from all electrified bodies--up to the point in question. This includes the a.s.sumption that there is no alteration in the general distribution of electricity on neighboring bodies. (Daniell.)
In practice the earth is arbitrarily taken as of zero electric potential.
430 STANDARD ELECTRICAL DICTIONARY.
Potential, Fall of.
The change in potential between any two points on an active circuit. The change in potential due to the maintenance of a current through a conductor.
The fall in potential multiplied by the current gives work or energy units.
The fall of potential in a circuit and its subsequent raising by the action of the generator is ill.u.s.trated by the diagram of a helix. In it the potential fall in the outer circuit is shown by the descent of the helix. This represents at once the outer circuit and the fall of potential in it. The vertical axis represents the portion of the circuit within the battery or generator in which the potential by the action of the generator is again raised to its original height.
In a circuit of even resistance the potential falls evenly throughout it.
A mechanical ill.u.s.tration of the relation of fall of potential to current is shown in the cut Fig. 269. A vertical wire is supposed to be fixed at its upper end and a lever arm and cord at its lower end, with weight and pulley imparts a torsional strain to it. The dials and indexes show a uniform twisting corresponding to fall of potential. For each unit of length there is a definite loss of twisting, corresponding to fall of potential in a unit of length of a conductor of uniform resistance. The total twisting represents the total potential difference. The weight sustained by the twisting represents the current maintained by the potential difference. For a shorter wire less twisting would be needed to sustain the weight, as in a shorter piece of the conductor less potential difference would be needed to maintain the same current.
Fig. 269. MECHANICAL ILl.u.s.tRATION OF FALL OF POTENTIAL AND CURRENT STRENGTH.
431 STANDARD ELECTRICAL DICTIONARY.
Fig. 270. ILl.u.s.tRATION OF THE FALL AND REDEVELOPMENT OF POTENTIAL IN AN ELECTRIC CIRCUIT.
The fall of potential in a circuit in portions of it is proportional to the resistance of the portions in question. This is shown in the diagram. The narrow lines indicate high and the broad lines low resistance. The fall in different portions is shown as proportional to the resistance of each portion.
Fig. 271. DIAGRAM OF FALL OF POTENTIAL IN A CONDUCTOR OF UNEVEN RESISTANCE.
Potential, Magnetic.
The magnetic potential at any point of a magnetic field expresses the work which would be done by the magnetic forces of the field on a positive unit of magnetism as it moves from that point to an infinite distance therefrom. The converse applies to a negative unit.
It is the exact a.n.a.logue of absolute electric potential.
The potential at any point due to a positive pole m at a distance r is m/r;. that due to a negative pole - m at a distance r" is equal to -m/r";. that due to both is equal to m/r - m/r" or m(1/r - 1/r").
Like electric potential and potential in general, magnetic potential while numerically expressing work or energy is neither, although often defined as such.
432 STANDARD ELECTRICAL DICTIONARY.
Potential, Negative.
The reverse of positive potential. (See Potential, Positive.)
Potential, Positive.
In general the higher potential. Taking the a.s.sumed direction of lines of force, they are a.s.sumed to be directed or to move from regions of positive to regions of negative potential. The copper or carbon plate of a voltaic battery is at positive potential compared to the zinc plate.
Potential, Unit of Electric.
The arbitrary or conventional potential--or briefly, the potential of a point in an electric field of force--is, numerically, the number of ergs of work necessary to bring a unit of electricity up to the point in question from a region of nominal zero potential--i. e., from the surface of the earth. (Daniell.) This would give the erg as the unit of potential.
Potential, Zero.
The potential of the earth is arbitrarily taken as the zero of electric potential.
The theoretical zero is the potential of a point infinitely distant from all electrified bodies.