Receiver, Harmonic.
A receiver including an electro-magnet whose armature is an elastic steel reed, vibrating to a particular note. Such a reed responds to a series of impulses succeeding each other with the exact frequency of its own natural vibrations, and does not respond to any other rapid series of impulses. (See Telegraph Harmonic.)
Reciprocal.
The reciprocal of a number is the quotient obtained by dividing one by the number. Thus the reciprocal of 8 is 1/8.
Applied to fractions the above operation is carried out by simply inverting the fraction. Thus the reciprocal of 3/4 is 4/3 or 1-1/3.
Record, Telephone.
Attempts have been made to produce a record from the vibrations of a telephone disc, which could be interpreted by phonograph or otherwise.
Fig. 284. MORSE RECORDER OR EMBOSSER.
452 STANDARD ELECTRICAL DICTIONARY.
Recorder, Morse.
A telegraphic receiving apparatus for recording on a strip of paper the dots and lines forming Morse characters as received over a telegraph line. Its general features are as follows:
A riband or strip of paper is drawn over a roller which is slightly indented around its centre. A stylus or blunt point carried by a vibrating arm nearly touches the paper. The arm normally is motionless and makes no mark on the paper. An armature is carried by the arm and an electro-magnet faces the armature. When a current is pa.s.sed through the magnet the armature is attracted and the stylus is forced against the paper, depressing it into the groove, thus producing a mark. When the current ceases the stylus is drawn back by a spring.
Fig. 285. INKING ROLLER MECHANISM OF MORSE RECORDER.
In some instruments a small inking roller takes the place of the stylus, and the roller is smooth. The cut, Fig. 285, shows the plan view of the ink-roller mechanism. J is the roller, L is the ink well, Cl is the arm by which it is raised or lowered by the electro-magnet, as in the embosser. S S is the frame of the instrument, and B the arbor to which the arm carrying the armature is secured, projecting to the right. A spring is arranged to rub against the edge of the inking roller and remove the ink from it.
The paper is fed through the apparatus by clockwork. At the present day sound reading has almost entirely replaced the sight reading of the recorder.
Recorder, Siphon.
A recording apparatus in which the inked marks are made on a strip of paper, the ink being supplied by a siphon terminating in a capillary orifice.
In the cut N S represents the poles of a powerful electro-magnet. A rectangular coil bb of wire is suspended between the coils. A stationary iron core a intensifies the field. The suspension wire f f 1 has its tension adjusted at h. This wire acts as conductor for the current.
453 STANDARD ELECTRICAL DICTIONARY.
The current is sent in one or the other direction or is cut off in practice to produce the desired oscillations of the coil b b. A gla.s.s siphon n l works upon a vertical axis l. One end l is immersed in an ink well m. Its longer end n touches a riband of paper o o. The thread k attached to one side of the coil pulls the siphon back and forth according to the direction of current going through the electro-magnet cores. A spiral spring adjusted by a hand-screw controls the siphon. In operation the siphon is drawn back and forth producing a zigzag line.
The upward marks represent dots, the downward ones dashes. Thus the Telegraphic Code can be transmitted on it. To cause the ink to issue properly, electrification by a static machine has been used, when the stylus does not actually touch the paper, but the ink is ejected in a series of dots.
Fig. 286. SIPHON RECORDER.
Reducteur for Ammeter.
A resistance arranged as a shunt to diminish the total current pa.s.sing through an ammeter. It is a.n.a.logous to a galvanometer shunt. (See Multiplying Power of Shunt.)
Reducteur for Voltmeter.
A resistance coil connected in series with a Voltmeter to diminish the current pa.s.sing through it. Its resistance being known in terms of the resistance of the voltmeter it increases the range of the instrument so that its readings may cover double or more than double their normal range.
Reduction of Ores, Electric.
Treatment of ores by the electric furnace (see Furnace, Electric.) The ore mixed with carbon and flux is melted by the combined arc and incandescent effects of the current and the metal separates. In another type the metal is brought into a fusible compound which is electrolyzed while fused in a crucible. Finally processes in which a solution of a salt of the metal is obtained, from which the metal is obtained by electrolysis, may be included. Aluminum is the metal to whose extraction the first described processes are applied.
454 STANDARD ELECTRICAL DICTIONARY.
Refraction, Electric Double.
Double refraction induced in some materials by the action of either an electrostatic, magnetic or an electro-magnetic field.
The intensity or degree of refracting power is proportional to the square of the strength of field.
Refreshing Action.
In electro-therapeutics the restoration of strength or of nerve force by the use of voltaic alternatives, q. v.
Region, Extra-polar.
In electro-therapeutics the area or region of the body remote from the therapeutic electrode.
Region, Polar.
In electro-therapeutics the area or region of the body near the therapeutic electrode.
Register, Electric.
There are various kinds of electric registers, for registering the movements of watchmen and other service. Contact or press b.u.t.tons may be distributed through a factory. Each one is connected so that when the circuit is closed thereby a mark is produced by the depression of a pencil upon a sheet or disc of paper by electro-magnetic mechanism. The paper is moved by clockwork, and is graduated into hours. For each push-b.u.t.ton a special mark may be made on the paper. The watchman is required to press the b.u.t.ton at specified times. This indicates his movements on the paper, and acts as a time detector to show whether he has been attending to his duty.
Register, Telegraphic.
A term often applied to telegraph recorders, instruments for producing on paper the characters of the Morse or other alphabet.
Regulation, Constant Current.
The regulation of a dynamo so that it shall give a constant current against any resistance in the outer circuits, within practical limits.
It is carried out in direct current machines generally by independent regulators embodying a controlling coil with plunger or some equivalent electro-magnetic device inserted in the main circuit and necessarily of low resistance. In some regulators the work of moving the regulator is executed mechanically, but under electrical control; in others the entire work is done by the current.
A typical regulator or governor (Golden"s) of the first cla.s.s comprises two driven friction wheels between which is a driving friction wheel, which can engage with one driven wheel only at once. It is brought into engagement with one or the other by a solenoid and plunger.
455 STANDARD ELECTRICAL DICTIONARY.