A sleeve with screws or other equivalent device for securing the ends of wires in electrical contact. A binding-post, q. v., is an example.
Sometimes wire spring-catches are used, the general idea being a device that enables wires to be connected or released at will without breaking off or marring their ends. The latter troubles result from twisting wires together.
Consequent Poles.
A bar magnet is often purposely or accidentally magnetized so as to have both ends of the same polarity, and the center of opposite polarity. The center is said to comprise two consequent poles. (See Magnet, Anomalous.)
Conservation of Electricity.
As every charge of electricity has its equal and opposite charge somewhere, near or far, more or less distributed, the sum of negative is equal always to the sum of positive electrical charges. For this doctrine the above t.i.tle was proposed by Lippman.
Contact Breaker.
Any contrivance for closing a circuit, and generally for opening and closing in quick succession. An old and primitive form consisted of a very coa.r.s.ely cut file. This was connected to one terminal, and the other terminal was drawn over its face, making and breaking contact as it jumped from tooth to tooth. (See Circuit Breaker--do. Automatic, etc.--do. Wheel-do. Pendulum.)
147 STANDARD ELECTRICAL DICTIONARY.
Contact, Electric.
A contact between two conductors, such that a current can flow through it. It may be brought about by simple touch or impact between the ends or terminals of a circuit, sometimes called a dotting contact, or by a sliding or rubbing of one terminal on another, or by a wheel rolling on a surface, the wheel and surface representing the two terminals.
There are various descriptions of contact, whose names are self-explanatory. The term is applied to telegraph line faults also, and under this, includes different descriptions of contact with neighboring lines, or with the earth.
Contact Electricity.
When two dissimilar substances are touched they a.s.sume different electric potentials. If conductors, their entire surfaces are affected; if dielectrics, only the surfaces which touch each other. (See Contact Theory.)
Contact Faults.
A cla.s.s of faults often called contacts, due to contact of the conductor of a circuit with another conductor. A full or metallic contact is where practically perfect contact is established; a partial contact and intermittent contact are self-explanatory.
Contact Point.
A point, pin or stud, often of platinum, arranged to come in contact with a contact spring, q. v., or another contact point or surface, under any determined conditions.
Contact Potential Difference.
The potential difference established by the contact of two dissimilar substances according to the contact theory, q. v.
Contact Series.
An arrangement or tabulation of substances in pairs, each intermediate substance appearing in two pairs, as the last member of the first, and first member of the succeeding pair, with the statement of the potential difference due to their contact, the positively electrified substance coming first. The following table of some contact potentials is due to Ayrton and Perry: CONTACT SERIES.
Difference of Potential in Volts.
Zinc--Lead .210 Lead--Tin .069 Tin--Iron .313 Iron--Copper .146 Copper--Platinum .238 Platinum-Carbon .113
The sum of these differences is 1.089, which is the contact potential between zinc and carbon.
Volta"s Law refers to this and states that-- The difference of potential produced by the contact of any two substances is equal to the sum of the differences of potentials between the intervening substances in the contact series.
It is to be remarked that the law should no longer be restricted to or stated only for metals.
148 STANDARD ELECTRICAL DICTIONARY.
Contact-spring.
A spring connected to one lead of an electric circuit, arranged to press against another spring, or contact point, q. v., under any conditions determined by the construction of the apparatus. (See Bell, Electric--Coil, Induction.)
Contact Theory.
A theory devised to explain electrification, the charging of bodies by friction, or rubbing, and the production of current by the voltaic battery. It holds that two bodies, by mere contact become oppositely electrified. If such contact is increased in extent by rubbing together, the intensity of their electrification is increased. This electrification is accounted for by the a.s.sumption of different kinetic energy, or energy of molecular motion, possessed by the two bodies; there being a loss and gain of energy, on the two sides respectively, the opposite electrifications are the result. Then when separated, the two bodies come apart oppositely electrified.
The above accounts for the frictional production of electricity. In the voltaic battery, a separation of the atoms of hydrogen and oxygen, and their consolidation into molecules occurs, and to such separation and the opposite electrification of the electrodes by the oxygen and hydrogen, the current is attributed, because the hydrogen goes to one electrode, and the oxygen to the other, each giving up or sharing its own charge with the electrodes to which it goes. If zinc is touched to copper, the zinc is positively and the copper negatively electrified. In the separation of hydrogen and oxygen, the hydrogen is positively and the oxygen negatively electrified. In the battery, the current is due to the higher contact difference of oxygen and hydrogen compared to that between zinc and copper. It will be seen that the two contact actions in a battery work against each other, and that the current is due to a differential contact action. The zinc in a battery is electrified negatively because the negative electrification of the oxygen is greater in amount than its own positive electrification due to contact with the copper.
Contractures.
A muscular spasm or teta.n.u.s due to the pa.s.sage of a current of electricity; a term in electro-therapeutics.
Controlling Field.
The magnetic or electro-magnetic field, which is used in galvanometers to control the magnetic needle, tending to restore it to a definite position whenever it is turned therefrom. It may be the earth"s field or one artificially produced.
Controlling Force.
In galvanometers and similar instruments, the force used to bring the needle or indicator back to zero. (See Controlling Field--Electro-Magnetic Control--Gravity Control--Magnetic Control--Spring Control.)
149 STANDARD ELECTRICAL DICTIONARY.
Convection, Electric.
The production of blasts or currents of air (convection streams) from points connected to statically charged conductors. The term is sometimes applied to electric convection of heat. (See Convection of Heat, Electric.)
Convection, Electrolytic.
The resistance of acidulated water as a true conductor is known to be very, almost immeasurably, high. As an electrolytic, its resistance is very much lower. Hence the current produced between immersed electrodes is theoretically almost null, unless the difference of potential between them is high enough to decompose the liquid. Yet a feeble current too great for a true conduction current is sometimes observed when two electrodes with potential difference too low to cause decomposition are immersed in it. Such a current is termed an electrolytic convection current. It is supposed to be due to various causes. Some attribute it to the presence of free oxygen from the air, dissolved in the water with which the hydrogen combines. Others attribute it to the diffusion of the gases of decomposition in the solution; others a.s.sume a partial polarization of the molecules without decomposition. Other theories are given, all of which are unsatisfactory. The term is due to Helmholtz.
Convection of Heat, Electric.
The effect of a current upon the distribution of heat in an unevenly heated conductor. In some, such as copper, the current tends to equalize the varying temperatures; the convection is then said to be positive, as comparable to that of water flowing through an unequally heated tube. In others, such as platinum or iron, it is negative, making the heated parts hotter, and the cooler parts relatively cooler.
The effect of the electric current in affecting the distribution of heat in unequally heated metal (Thomson"s effect. q. v.), is sometimes so termed. If a current pa.s.ses through unequally heated iron it tends to increase the difference of temperature, and the convection is negative; in copper it tends to equalize the temperature, and the convection is positive.
Converter.
An induction coil used with the alternating current for changing potential difference and inversely therewith the available current. They generally lower the potential, and increase the current, and are placed between the primary high potential system that connects the houses with the central station, and the secondary low potential system within the houses. A converter consists of a core of thin iron sheets, wound with a fine primary coil of many convolutions, and a coa.r.s.e secondary coil of few convolutions. The ratio of convolutions gives the ratio of maximum potential differences of their terminals between the primary and secondary coils. The coil may be jacketed with iron to increase the permeance. (See Alternating Current System.)
Fig. 110. FERRANTI"S CONVERTER OR TRANSFORMER.