8 6
=Designing Ironwork.= By HENRY ADAMS. Second series. 8vo, sewed.
Part I. A Steel Box Girder. (_1894_)
_net_ 0 9
" II. Built-up Steel Stanchions. (_1901_)
_net_ 1 3
" III. Cisterns and Tanks. (_1902_)
_net_ 1 0
" IV. A Fireproof Floor. (_1903_)
_net_ 1 0
=A Practical Treatise on Segmental and Elliptical Oblique or Skew Arches.= By G.J. BELL. Second edition, 17 plates, 125 pp. royal 8vo.
(_1906_)
_net_ 1 1 0
=Economics of Construction in relation to Framed Structures.= By R.H.
Bow. Third thousand, 16 plates, 88 pp. 8vo. (1873)
5 0
=Theory of Voussoir Arches.= By Prof. W. CAIN. Third edition, 201 pp.
18mo, boards. (_New York, 1905_)
_net_ 2 0
=New Formulae for the Loads and Deflections= of Solid Beams and Girders. By W. DONALDSON. Second edition, 8vo. (_1872_)
4 6
=Plate Girder Railway Bridges.= By M. FITZMAURICE. 4 plates, 104 pp.
8vo. (_1895_)
6 0
=Pocket Book of Calculations in Stresses.= By E.M. GEORGE. 66 illus.
140 pp. royal 32mo, half roan. (_1895_)
3 6
=Strains on Braced Iron Arches= and Arched Iron Bridges. By A.S.
HEAFORD. 39 pp. 8vo. (_1883_)
6 0
=Tables for Roof Framing.= By G.D. INSKIP. Second edition, 451 pp.
8vo, leather. (_New York, 1905_)
_net_ 12 6
=Stresses in Girder and Roof Frames,= for both dead and live loads, by simple Multiplication, etc. By F.R. JOHNSON. 28 plates, 215 pp.
crown 8vo. (_1894_)
6 0
=A Graphical Method for Swing Bridges.= By B.F. LA RUE. 4 plates, 104 pp. 18mo, boards. (_New York, 1892_)
_net_ 2 0
=Notes on Cylinder Bridge Piers= and the Well System of Foundations.
By J. NEWMAN. 144 pp. 8vo. (_1893_)
6 0
=A New Method of Graphic Statics= applied in the Construction of Wrought Iron Girders. By E. OLANDER. 16 plates, small folio. (_1887_)
10 6
=Reference Book for Statical Calculations.= By F. RUFF. With diagrams, 140 pp. crown 8vo. (_1906_)
_net_ 5 0
=The Strength and Proportion of Riveted Joints.= By B.B. STONEY. 87 pp. 8vo. (_1885_)
5 0
=The Anatomy of Bridgework.= By W.H. THORPE. 103 illus. 190 pp. crown 8vo. (_1906_)
_net_ 6 0
CEMENT AND CONCRETE.
=Portland Cement:= its Manufacture, Testing and Use. By D.B. BUTLER.
Second edition, 97 illus. 396 pp. demy 8vo. (_1905_)
_net_ 16 0
=Theory of Steel-Concrete Arches= and of Vaulted Structures. By W.
CAIN. Fourth edition, 27 illus. 212 pp. 18mo, boards. (_New York, 1906_)