=The Mechanician=: a Treatise on the Construction and Manipulation of Tools. By C. KNIGHT. Fifth edition, 96 plates, 397 pp. 4to. (_1897_)
18 0
=Turner"s and Fitter"s Pocket Book.= By J. LA NICCA. 18mo, sewed
0 6
=Tables for Engineers and Mechanics=, giving the values of the different trains of wheels required to produce Screws of any pitch. By LORD LINDSAY. Second edition, royal 8vo, oblong
2 0
=Screw-cutting Tables.= By W.A. MARTIN. Seventh edition, royal 8vo, oblong
1 0
=Metal Plate Work=, its Patterns and their Geometry, for the use of Tin, Iron and Zinc Plate Workers. By C.T. MILLIS. Fourth edition, 280 diagrams, 470 pp. crown 8vo. (_1906_)
9 0
=Engineers" and General Smiths" Work.= The smith and forgeman"s handbook of practical smithing and forging. By T. MOORE. 401 illus. 248 pp. crown 8vo. (_1906_)
_net_ 5 0
=Modern Machine Shop Construction=, equipment and management.
By O.E. PERRIGO. 208 illus. 343 pp. crown 4to. (_New York, 1906_)
_net_ 21 0
=Turner"s Handbook on Screw-cutting=, Coning, etc. By W. PRICE.
Fcap. 8vo
1 0
=Introduction to Eccentric Spiral Turning.= By H.C. ROBINSON.
12 plates, 23 illus. 48 pp. 8vo. (_1906_)
_net_ 4 6
=Manual of Instruction in Hard Soldering.= By H. ROWELL. Sixth edition, 7 illus. 66 pp. crown 8vo. (_New York, 1910_)
_net_ 3 0
=Pocket Book on Boilermaking, Shipbuilding=, and the Steel and Iron Trades in General. By M.J. s.e.xTON. Sixth edition, 85 illus. 319 pp. royal 32mo, roan, gilt edges. (_1909_)
_net_ 5 0
=Power and its Transmission.= A Practical Handbook for the Factory and Works Manager. By T.A. SMITH. 76 pp. fcap. 8vo.
(_1910_)
_net_ 2 0
=Spons" Mechanics" Own Book=: A Manual for Handicraftsmen and Amateurs. Sixth edition, 1430 illus. 720 pp. demy 8vo. (_1903_)
6 0
Ditto ditto half morocco
7 6
=Spons" Workshop Receipts for Manufacturers, Mechanics and Scientific Amateurs.= New and thoroughly revised edition, crown 8vo. (_1909_)
_each net_ 3 0
Vol. I. ACETYLENE LIGHTING _to_ DRYING. 223 illus. 532 pp.
Vol. II. DYEING _to_ j.a.pANNING. 259 illus. 540 pp.
Vol. III. JOINTING PIPES _to_ PUMPS. 256 illus. 528 pp.
Vol. IV. RAINWATER SEPARATORS _to_ WINES. 250 illus. 520 pp.
=Gauges at a Glance.= By T. TAYLOR. Second edition, post 8vo, oblong, with tape converter. (_1900_)
_net_ 5 0
=Simple Soldering=, both Hard and Soft. By E. THATCHER. 52 illus. 76 pp. crown 8vo, limp. (S. & C. SERIES, NO. 18.) (_New York, 1910_)
_net_ 1 6
=The Modern Machinist.= By J.T. USHER. Fifth edition. 257 illus. 322 pp. 8vo. (_New York, 1904_)
_net_ 10 6
=Practical Wood Carving.= By C.J. WOODSEND. 108 illus. 86 pp.
8vo. (_New York, 1897_)
_net_ 4 6
=American Tool Making= and Interchangeable Manufacturing. By J.W. WOODWORTH. 600 illus. 544 pp. demy 8vo. (_New York, 1905_)
_net_ 17 0
USEFUL TABLES.
=Weights and Measurements of Sheet Lead.= By J. ALEXANDER.
32mo, roan
_net_ 1 6