Melt together 9 parts of lead, 2 of antimony and one of bis.m.u.th. This metal is very useful in filling small defects in iron castings, &c.
156. QUEEN"S METAL
Melt together 9 parts of tin, 1 of antimony, 1 of bis.m.u.th, and 1 of lead.
157. IMITATION PLATINUM
This metal, or alloy, very closely resembles platinum. Melt together 8 parts of bra.s.s and 5 parts of zinc.
158. CHINESE WHITE COPPER
Melt together 40.4 parts of copper, 31.6 parts of nickel, 25.4 of zinc, and 2.6 of iron.
159. MANHEIM GOLD
Melt together 3 parts copper, 1 of zinc, and a little tin.
160. TOMBACK, OR RED BRa.s.s
Melt together 8 parts of copper, and 1 part of zinc.
161. IMITATION GOLD
Take of platina 8 parts, of silver 4 parts, copper 12 parts, melt all together.
162. IMITATION SILVER
Take of block tin 100 parts, metallic antimony 8 parts, bis.m.u.th 1 part, and 4 parts of copper; melt all together.
163. TRUE IMITATION OF GOLD
Dr. Harmsteadt"s imitation of gold, which is stated not only to resemble gold in colour, but also in specific gravity and ductility, consists of 16 parts of platinum, 7 parts of copper, and 1 of zinc, put in a crucible, covered with charcoal powder, and melted into a ma.s.s.
164. TRUE IMITATION OF SILVER
Imitation of pure silver, so perfect in its resemblance that no chemist living can tell it from pure virgin silver. It was obtained from a German chemist now dead; he used it for unlawful purposes to the amount of thousands, and yet the metal is so perfect that he was never discovered. It is all melted together in a crucible, here it is: 1/4 oz. of copper, 2 oz. of bra.s.s, 3 oz. of pure silver, 1 oz.
of bis.m.u.th, 2 ozs. of saltpetre, 2 ozs. of common salt, 1 oz. of a.r.s.enic, and 1 oz. of potash.
165. MOULDS AND DIES
Take copper, zinc, and silver, in equal proportions, and melt them together, and mould into the forms you desire, and bring the same to a nearly white heat; now lay on the thing that you would take the impression of, and press it with sufficient force, and you will find that you have a perfect and beautiful impression. All of the above metals should be melted under a coat of powdered charcoal.
166. TO SOFTEN HORN
To 1 lb. of wood ashes, add 2 lbs. of quicklime; put them into a quart of water, let the whole boil till reduced to one third, then dip a feather in, and if, on drawing it out, the plume should come off, it is a proof that it is boiled enough, if not, let it boil a little longer; when it is settled filter it off, and in the liquor thus strained put in shavings of horn; let them soak for three days, and, first anointing your hands with oil, work the horn into a ma.s.s, and print or mould it into any shape you please.
167. TO MAKE MOULDS OF HORN
If you wish to take the impression of any coin, medal, &c., previously anoint it with oil, then lay the horn shavings over it in its softened state; when dry the impression will be sunk into the horn, and this will serve as a mould to reproduce, either by plaster of Paris, putty and glue, or isingla.s.s and ground egg sh.e.l.ls, the exact resemblance of the coin or medal.
168. TO CASE FIGURES IN IMITATION OF IVORY
Make isingla.s.s and strong brandy into a paste, with powder of egg sh.e.l.ls, very finely ground; you may give it what colour you please, but cast it warm into your mould, which you previously oil over; leave the figure in the mould till dry, and you will find, on taking it out, that it bears a very strong resemblance to ivory.
169. TRUE GOLD POWDER
Put some gold leaf, with a little honey or thick gum water, (whenever I speak of gum I mean gum arabic,) into an earthen mortar, and pound the mixture till the gold is reduced to very small particles; then wash out the honey or gum repeatedly with warm water, and the gold will be left behind in a state of powder, which, when dried, is fit for use.
170. TRUE GOLD POWDER
Another, and perhaps better method of preparing gold powder is to heat a prepared amalgam of gold in a clean open crucible, (an amalgam of any metal is formed by a mixture of quicksilver with that metal) continuing a very strong heat till all the mercury has evaporated, stirring the amalgam all the while with a gla.s.s rod; when the mercury has entirely left the gold, grind the remainder in a Wedgewood"s mortar, with a little water, and when dried it will be fit for use. The subliming the mercury is, however, a process injurious to the health.
171. COLOUR HEIGHTENING COMPOSITIONS
For yellow gold, dissolve in water 6 ozs. of saltpetre, 2 ozs. of copperas, 1 oz. of white vitriol, and 1 oz. of alum. If wanted redder, add a small portion of blue vitriol.
172. FOR GREEN GOLD
Dissolve in water a mixture consisting of 1-1/2 oz. of saltpetre; vitriol and sal-ammoniac, 1-1/4 oz. of each, and 1 oz. verdigris.
173. FOR RED GOLD
Take 1-1/2 oz. of red ochre in fine powder, the same quant.i.ty of calcined verdigris, 1/2 oz. of calcined borax, and 4 oz. of melted yellow wax; the verdigris must be calcined, or else, by the heat applied in melting the wax, the vinegar becomes so concentrated as to corrode the surface, and make it appear speckled. These last three are colours for heightening compositions.
174. MOSAIC GOLD
Mosaic gold, or aurum mosaic.u.m, is used for inferior articles. It is prepared in the following manner: 1 lb. of tin is melted in a crucible, and 1/2 lb. of purified quicksilver added to it; when this mixture is cold, it is reduced to powder, and ground with 1/2 lb.
of sal-ammoniac, and 7 ozs. of flower of sulphur, till the whole is thoroughly mixed; they are then calcined in a mattra.s.s, and the sublimation of the other ingredients leaves the tin converted into the aurum mosaic.u.m, which is found at the bottom of the gla.s.s, like a ma.s.s of bright flakey gold powder. Should any black or discoloured particles appear, they must be removed. The sal-ammoniac used here must be very white and clear, and the mercury quite pure and unadulterated. When a shade of deeper red is required, it can easily be obtained by grinding a very small quant.i.ty of red lead along with the above materials.