E1 Front Lap Calender Roll Driving Gear, 12 T.
E2 Bottom Cross Shaft Gear, driving Calender Rolls and Top Cross Shaft, 14 T.
F Large Double Intermediate, driving Top Cross Shaft, 50 T.
F1 Small Double Intermediate, driving Bottom Calender Roll, 27 T.
F2 Bottom Calender Roll, 7 in. dia.
G Top Cross Shaft Gear, 30 T.
G1 Side Shaft Driving Bevel Gear, 24 T.
H Side Shaft Bevel Gear, Calender End, 24 T.
H1 Side Shaft Bevel Gear, Feed End, 28 T.
I Compound Intermediate Bevel Gear, 28 T.
I1 Compound Intermediate Gear, driving Bottom Feed Roll, 37 T.
J Bottom Feed Roll, 2 in. dia.
{42}
J1 Bottom Feed Roll Gear, 33 T.
J2 Cage Section Top Stripping Roll Driving Gear, 9 T.; 8 T.
Gear may be used to vary speed.
K Cage Section Top Stripping Roll Intermediate Gear, 52 T.
L Cage Section Top Stripping Roll Gear, 14 T.
M Cage Section Bottom Stripping Roll Gear, 14 T.
M1 Cage Section Bottom Cage Driving Gear, 23 T.
N Cage Section Bottom Cage Intermediate Gear, 20 T.
O Cage Section Bottom Cage Gear, 181 T.
O1 Cage Section Top Cage Gear, 181 T.
P Front Lap Calender Roll, 9 in. dia.
P1 Front Lap Calender Roll Gear, 53 T.
P2 Back Lap Calender Roll Driving Gear, 24 T.
Q Back Lap Calender Roll Intermediate Gear, 22 T.
R Back Lap Calender Roll Gear, 24 T.
R1 Back Lap Calender Roll, 9 in. dia.
S 3d Calender Roll Gear, 21 T.
S1 3d Calender Roll, 5-1/2 in. dia.
T 2d Calender Roll Gear, 22 T.
T1 2d Calender Roll, 5-1/2 in. dia.
U Top Calender Roll Gear, 23 T.
U1 Top Calender Roll, 5-1/2 in. dia.
V Calender Section Top Stripping Roll Intermediate Gear, 17 T.
V1 Calender Section Top Stripping Roll Intermediate Gear, 17 T.
W Calender Section Top Stripping Roll Gear, 14 T.
X Calender Section Bottom Stripping Roll Gear, 14 T.
X1 Calender Section Bottom Cage Driving Gear, 23 T.
Y Calender Section Bottom Cage Intermediate Gear, 20 T.
Z Calender Section Bottom Cage Gear, 181 T.
Z1 Calender Section Top Cage Gear, 181 T.
{43}
BREAKER LAPPERS.
DRAFT CALCULATIONS.
[Ill.u.s.tration]
{44}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER.
SIDE VIEW OF GEARING
{45}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER.
SIDE VIEW OF GEARING
{46}
[Ill.u.s.tration]
INTERMEDIATE OR FINISHER LAPPER
PLAN VIEW OF GEARING
{47}
INTERMEDIATE AND FINISHER LAPPERS.
ALPHABETICAL REFERENCES TO DRAWINGS.
A Main Driving Pulley, 16 in. dia. x 4-1/4 in. face; 5-1/4 in. face for Two-beater Machine.
A1 Beater Driving Pulley, 30 in. dia. x 4-1/4 in. face, for 18-in.
Rigid Beater; 22 in. dia. x 4-1/4 in. face for Carding Beater.
B Beater Pulley, 9 in. dia. x 4-1/4 in. face (occasionally 10 in. dia.) B1 Feed Pulley, 3 in. to 13 in. dia. x 2-1/4 in. face; advancing by 1/2 in. increments.
B2 Calender Section Fan Driving Pulley, 6 in. dia. x 2-1/4 in.
face for 18-in. Rigid Beater, and 8 in. dia. x 2-1/4 in.
face for Carding Beater.
B3 Calender Fan Pulley. 8 in. dia. x 2-1/4 in. face.
C Driving Pulley for Side Shaft, etc., 12 in. dia. x 2-1/4 in. face.
C1 Evener Cross Shaft Bevel Gear, 27 T.
C2 Evener Cross Shaft Change Gear, 55-35 T; diminishing by one tooth.
D Side Shaft Bevel Gear, Feed End, 27 T.
D1 Side Shaft Bevel Gear, Calender End, 18 T.
E Large Clutch Bevel Gear, 60 T.
E1 Small Clutch Gear, 17 T.
F Calender Cross Shaft Driven Gear, 96 T.
F1 Front Lap Calender Roll Driving Gear, 12 T.
F2 Calender Cross Shaft Gear, driving Calender Rolls, 14 T.
G Large Double Intermediate, driving Bottom Calender Roll, 50 T.