G1 Small Double Intermediate, driving Third Calender Roll 27 T.
G2 Bottom Calender Roll, 7 in. dia.
H 3d Calender Roll Gear, 21 T.
H1 3d Calendar Roll, 5-1/2 in. dia.
I 2d Calender Roll Gear, 22 T.
I1 2d Calender Roll, 5-1/2 in. dia.
J Top Calender Roll Gear, 23 T.
J1 Top Calender Roll, 5-1/2 in. dia.
K Top Stripping Roll Intermediate Gear, 17 T.
K1 Top Stripping Roll Intermediate Gear, 17 T.
L Top Stripping Roll Gear, 14 T.
{48}
M Bottom Stripping Roll Gear, 14 T.
M1 Bottom Cage Driving Gear, 23 T.
N Bottom Cage Intermediate Gear, 20 T.
O Bottom Cage Gear, 181 T.
O1 Top Cage Gear, 181 T.
P Bottom Cone Change Gear, 35-55 T; advancing by one tooth.
P1 Bottom Cone, driving Top Cone. Letters also represent diameters near the middle of Cones.
Q Top Cone.
Q1 Worm Shaft Driving Spiral Gear, 9 T.
R Worm Shaft Spiral Gear, 9 T.
R1 Worm Shaft Worm, double threaded, right hand; equivalent to Gear having two teeth.
S Worm Gear, 78 T.
S1 Feed Roll and Ap.r.o.n Roll Driving Gear, 12 T.
T Feed Roll, 3 in. dia.
T1 Feed Roll Gear, 24 T.
U Ap.r.o.n Roll Gear, 29 T.
V Front Lap Calender Roll, 9 in. dia.
V1 Front Lap Calendar Roll Gear, 53 T.
V2 Back Lap Calendar Roll Driving Gear, 24 T.
W Back Lap Calender Roll Intermediate Gear, 22 T.
X Back Lap Calender Roll Gear, 24 T.
X1 Back Lap Calender Roll, 9 in. dia.
{49}
INTERMEDIATE AND FINISHER LAPPERS.
DRAFT CALCULATIONS.
[Ill.u.s.tration]
{50}
PRODUCTION CALCULATIONS.
[Ill.u.s.tration]
NOTE--With our latest gearing arrangement, the number of teeth in Knock-off Worm Gear corresponds to the number of yards in the lap.
{51}
INTERMEDIATE AND FINISHER LAPPERS.
DRAFT TABLE.
[Ill.u.s.tration]
{52}
[Ill.u.s.tration]
AUTOMATIC HOPPER FEEDER
{53}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) WITH CAGE SECTION AND CALENDER HEAD
{54}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) AND SINGLE BEATER BREAKER LAPPER
{55}
[Ill.u.s.tration]
SELF-FEEDING OPENER (18-IN. BEATER) AND SINGLE BEATER BREAKER LAPPER
{56}
[Ill.u.s.tration]
SELF-FEEDING OPENER (18-IN. BEATER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER
{57}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER
{58}
[Ill.u.s.tration]
SINGLE BEATER INTERMEDIATE OR FINISHER LAPPER
{59}
[Ill.u.s.tration]
THREE-PROCESS SYSTEM OF PICKING WITH 20 FT. OF AUTOMATIC CLEANING TRUCK ALSO CONDUCTING TRUNK BETWEEN OPENER AND BREAKER